SPL front camber coming soon?
 

SPL has teamed up with the new World Challenge 370Z team and has made new comments elsewhere that the part we've been waiting for is in development.

SFR Enterprises Names SPL Parts Inc. a Full-Season Sponsor in 2012 Pirelli World Challenge Series

Will we have it at long last?

Hope so...

If not, I talked with Ground Control today and they may jump in the game... GC has a solid reputation in the Porsche world, as some of you may know

I would love to have something better than those SPC ...

Finally! I skipped the front camber hoping for something better.

I hope so. I'd buy these in a heartbeat.

i emailed em twice about these. sure hope something comes out of this partnership you linked.

This is a pic from the right rear, what am I seeing on the left? A replacement for the spring holder...

http://www.the370z.com/attachment.ph...1&d=1330387164

SPL makes a rear "toe link" that replaces the OEM spring perch but looks different than your pic above, based upon their website

SPL PRO SUSPENSION | 09+ Nissan 370Z Z34

http://cdn.splparts.com/small/SPLRTAZ34_0.JPG

I'm going to pick some of these up before my next alignment. A little over priced but will be worthy.

It's a rear mid link. This is a link to the 350z part.

SPL PRO SUSPENSION | 03-08 Nissan 350Z Z33

These only work if you have true coilovers, hence there is no need for a spring perch.

+1 ... don't order these unless you are swapping to an integrated rear spring/damper setup

I have a true type setup

I know you do, but we don't all have beastly cars like you. :tup:

It would be nice to see the catalog of parts they make for the 350 become available to us as well.

Oh yes! I'd buy every bit of it... in fact, the earlier pic of the rear suspension piece looks an awful lot like this 350 mid-link

SPL PRO SUSPENSION | 03-08 Nissan 350Z Z33

http://cdn.splparts.com/small/SPLRMLZ33_4.JPG