SPL front camber coming soon?

synolimit · 09-19-2013, 11:35 PM

Quote:

Originally Posted by sig11

The SPC arms broke on me during my first session at Road Atlanta... Had I not remembered to bring my stock arms I would have been sitting around after driving ~600 miles. I had only done a few track days on them at that point too.

Wish I hadn't pitched them sometimes though.

Just to be clear as this is a first I'm seeing if correct, you're talking about the fronts and not the rears correct? What broke, where, pics?

Rusty · 09-20-2013, 11:16 AM

Quote:

Originally Posted by corner3garage

They didn't want to be releasing prices, since it's not final, but it will probably be about $899 for these.

We have a pre-order going, so if anyone wants to be some of the first ones to get these, PM ME!

You have a PM sir.

martin82 · 09-20-2013, 12:38 PM

also for the rear spc control arm the bushings were completely destroyed. I bet you once I remove my front spc control arm the bushing is gone as well. I mentioned this before but they promised me a new set that never was sent out!! That's great customer service for you!

sig11 · 09-22-2013, 09:39 AM

Quote:

Originally Posted by synolimit

Just to be clear as this is a first I'm seeing if correct, you're talking about the fronts and not the rears correct? What broke, where, pics?

Yup the front. First half of the session felt good then I started getting severe vibrations under braking. Rotors looked fine and the car felt ok in the paddock so I pulled the wheels and saw that the front UCA bushings had completely given up. The other side were almost as bad so I chucked 'em.

Maybe I was just lucky... I believe I only had 4-5 track days on them at that point. I'd have to check my notebook.

Rusty · 09-25-2013, 05:52 AM

Ordered a set of arms yesterday.

synolimit · 09-25-2013, 07:58 AM

Quote:

Originally Posted by sig11

Yup the front. First half of the session felt good then I started getting severe vibrations under braking. Rotors looked fine and the car felt ok in the paddock so I pulled the wheels and saw that the front UCA bushings had completely given up. The other side were almost as bad so I chucked 'em.

Maybe I was just lucky... I believe I only had 4-5 track days on them at that point. I'd have to check my notebook.

So it didn't break, the bushings just gave out? Not like the arm cracked in half or welds failed. The back 2 on each arm or the front one?

osbornsm · 09-25-2013, 08:04 AM

Can Somebody Explain to a suspension noob what the hell replacing one arm for another helps? I understand the camber arms... but what's all this other business in there??

fuct · 09-25-2013, 09:00 AM

Quote:

Originally Posted by osbornsm

Can Somebody Explain to a suspension noob what the hell replacing one arm for another helps? I understand the camber arms... but what's all this other business in there??

mostly its all for adjust ability.

travisjb · 09-25-2013, 10:21 AM

adjustability (of geometry) and compliance (firmness/softness/play)... changing angles impacts handling... compliance can impact how the car responds in transitions and the feel of it... compliance can also impact reliability of that part and connected parts. there is a 'car bible' on the internet that talks about suspension tuning that you can read, maybe someone can post the link

sig11 · 09-25-2013, 08:15 PM

Quote:

Originally Posted by synolimit

So it didn't break, the bushings just gave out? Not like the arm cracked in half or welds failed. The back 2 on each arm or the front one?

Yup. Just bushings. Both on passenger side drivers side had some play but not nearly as bad.

synolimit · 09-25-2013, 10:52 PM

Quote:

Originally Posted by sig11

Yup. Just bushings. Both on passenger side drivers side had some play but not nearly as bad.

I wonder what a bearing installed would feel like

corner3garage · 09-27-2013, 06:49 PM

OMFG WE ARE SO EXCITED!

Check Out the Pre-Order thread here!

cv129 · 10-03-2013, 11:12 PM

Finally here for real

SPOHN · 10-04-2013, 03:49 AM

Im putting all eggs in this basket

1cleanZ · 10-04-2013, 11:12 AM

Quote:

Originally Posted by Rusty

Ordered a set of arms yesterday.

Definitely post up when you receive them. I want to see them fully assembled.

09-25-2013, 05:52 AM	#110 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,427 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Ordered a set of arms yesterday. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

09-25-2013, 08:04 AM	#112 (permalink)
osbornsm A True Z Fanatic Join Date: Jun 2011 Location: WHAT Posts: 2,551 Drives: 2018 Camaro SS 1LE Rep Power: 424	Can Somebody Explain to a suspension noob what the hell replacing one arm for another helps? I understand the camber arms... but what's all this other business in there?? __________________ 2018 Camaro SS 1LE (455hp) - 2011 Nissan 370z (333hp) - 2004 VW R32 (240hp) - 2000 Civic Si (160hp)

09-25-2013, 10:21 AM	#114 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 189	adjustability (of geometry) and compliance (firmness/softness/play)... changing angles impacts handling... compliance can impact how the car responds in transitions and the feel of it... compliance can also impact reliability of that part and connected parts. there is a 'car bible' on the internet that talks about suspension tuning that you can read, maybe someone can post the link fuct likes this. __________________ 2009 370Z #104 For Sale

09-27-2013, 06:49 PM	#117 (permalink)
corner3garage The370Z.com Sponsor Join Date: Oct 2009 Location: Laguna Hills, CA Posts: 9,879 Drives: 240sx, 350z, 370z Rep Power: 35	OMFG WE ARE SO EXCITED! Check Out the Pre-Order thread here! __________________ Corner3motorsports.com

10-04-2013, 03:49 AM	#119 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 222	Im putting all eggs in this basket __________________

09-20-2013, 12:38 PM	#108 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	also for the rear spc control arm the bushings were completely destroyed. I bet you once I remove my front spc control arm the bushing is gone as well. I mentioned this before but they promised me a new set that never was sent out!! That's great customer service for you!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] OEM front camber arms	Rsdntevl	Parts for sale (Private Classifieds)	4	04-29-2012 07:33 PM
Front Camber vs. Rear Camber	osbornsm	Brakes & Suspension	2	02-21-2012 04:12 PM
[FOR SALE] NEW SPC Front Camber Kit	sexZness	Parts for sale (Private Classifieds)	8	11-10-2011 07:26 AM
[WTB] WTB: Front camber arms	JPnAZ	Parts for sale (Private Classifieds)	0	09-08-2011 11:51 AM