Jordo's New Project...

Jordo! · 02-21-2012, 03:28 PM

Hey folks,

Thought some of you gents might be interested in this. I'm having some braces made that will be based on of the Nissan S-tune Chassis braces -- will be MUCH less expensive than buying the official gear.

These are the originals -- the fabbed ones should look something like this: New Suspension add-on for the Z1 370Z Shop Car

I'm also having gussets welded to the front strut tower bar, similar to the bar on the Nismo Z.

(On a related note, I installed the front Yamaha damper and am looking for the rear -- if someone is selling the rear one, please PM me with price shipped to 33613).

FYI: Depending on how they come out (there will be many pics as they are created and installed), and if there's interest, my fabricator might make these available to others too.

Project begins March 9 and should be wrapped up by the 15th. Updates as they happen.

While I'm at it -- are there any other braces worth fabbing? Fender braces? Input from Auto-xers and other track guys are welcome

KevinB · 02-21-2012, 10:01 PM

Sub'd

corbin09 · 02-22-2012, 09:55 AM

Fender braces would be nice.. Really most of the products GT spec makes would be nice if we could get them a little cheaper.

Jordo! · 02-22-2012, 11:32 PM

Quote:

Originally Posted by corbin09

Fender braces would be nice.. Really most of the products GT spec makes would be nice if we could get them a little cheaper.

I'll check them out.

My fabricator buddy suggested fender braces -- but wasn't sure if we needed them or not.

If definitely open to suggestions, and if there's interest, I'm sure he'd be open to making various chassis braces for others.

02-21-2012, 03:28 PM	#1 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	Jordo's New Project... Hey folks, Thought some of you gents might be interested in this. I'm having some braces made that will be based on of the Nissan S-tune Chassis braces -- will be MUCH less expensive than buying the official gear. These are the originals -- the fabbed ones should look something like this: New Suspension add-on for the Z1 370Z Shop Car I'm also having gussets welded to the front strut tower bar, similar to the bar on the Nismo Z. (On a related note, I installed the front Yamaha damper and am looking for the rear -- if someone is selling the rear one, please PM me with price shipped to 33613). FYI: Depending on how they come out (there will be many pics as they are created and installed), and if there's interest, my fabricator might make these available to others too. Project begins March 9 and should be wrapped up by the 15th. Updates as they happen. While I'm at it -- are there any other braces worth fabbing? Fender braces? Input from Auto-xers and other track guys are welcome __________________ Enjoy it. Destroy it.

02-21-2012, 10:01 PM	#2 (permalink)
KevinB Base Member Join Date: Sep 2011 Location: Louisiana Age: 53 Posts: 75 Drives: 09 370z blk m6 Rep Power: 14	Sub'd __________________ 09 6MT MB: Int/Ext LEDs, Stillen G3 + FI test pipes + FI cat back + Stillen sways + Clutch Helper Spring

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
theDreamer's Silvia	theDreamer	Other Vehicles	43	03-01-2021 12:40 PM
Project Mr. K'	kellyefields	Member's 370Z Gallery	271	05-12-2015 07:15 PM
Project RB-Z	docaam	Member's 370Z Gallery	335	04-10-2015 09:26 AM
3 yrs Project... its a Z but not Z :P	CarbonSignal	Forced Induction	6	01-24-2011 04:58 PM
Take a look at my little project...	xbigb4ller69z	Brakes & Suspension	5	08-17-2010 12:46 PM

02-22-2012, 09:55 AM	#3 (permalink)
corbin09 Track Member Join Date: Jun 2009 Location: Dallas tx Posts: 665 Drives: 370z Rep Power: 280	Fender braces would be nice.. Really most of the products GT spec makes would be nice if we could get them a little cheaper.