Rack & Pinion Broken "power steering gear"

Carbon_z · 01-20-2012, 06:24 AM

So I thought the thing was called a power steering gear and no im not talking about the pump but anyways, attached is a picture of the broken piece. What the easiest way to replace/fix this without replacing the ENTIRE assembly, which is 900 bucks. I believe there is a kit that fixes it but honestly im not sure...

here's the link to the service manual and diagram.

also attached is a pic of broken part on car.

ChrisSlicks · 01-20-2012, 06:44 AM

Looks like it broke the inner tie rod. Nissan calls it something weird like "inner socket". It may come with new seals or may require them separately. Follow the torque specs, you don't want to over tighten this one or you'll be in for the $900 steering rack.

Carbon_z · 01-20-2012, 06:48 AM

so the inner socket should fix it?? because there's a weird pin-type thing poking out of the boot. Ive never changed one but can obviously i can just need to know if that's damage that is still fixable with the inner socket kit....

ChrisSlicks · 01-20-2012, 06:51 AM

Hard to tell the extent of the damage from the picture. The pin may have pierced the boot from being bent, it also could have damaged the gears in the rack, hard to say.

Carbon_z · 01-20-2012, 06:51 AM

heres a couple additional pics showing ya the impact. It broke the sway bar and ripped wheel off control arm, with the spindle

Carbon_z · 01-20-2012, 06:53 AM

well I can tell you this... The car is on blocks since one wheel is missing. But even when car is off and not even moving, you can turn the steering wheel. is that related to that or pressure being gone.

ChrisSlicks · 01-20-2012, 07:08 AM

Yes the steering will be fairly light as there is no resistance. You get the same thing if you just jack the front of the car in the air. You have even less resistance as the steering rack isn't even attached to anything on that side.

I guess I would go try replace the inner tie rod first, it is about $80.

Your sway bar looks okay actually, just looks like the end link broke.

Carbon_z · 01-20-2012, 09:23 AM

Quote:

Originally Posted by ChrisSlicks

Yes the steering will be fairly light as there is no resistance. You get the same thing if you just jack the front of the car in the air. You have even less resistance as the steering rack isn't even attached to anything on that side.

I guess I would go try replace the inner tie rod first, it is about $80.

Your sway bar looks okay actually, just looks like the end link broke.

yea thats all that is wrong with sway bar but dont I have to replace it since its broken on the joint??? I just ordered spindle and hub so almost back on all fours., one being a donut lol

MattP725 · 01-20-2012, 11:41 AM

Def a tie-rod as Chris said... no need to replace rack (unless it is bent).

Carbon_z · 01-20-2012, 12:28 PM

so what section of that bar do i remove, if its divided like that? just around the boot??

Baer383 · 01-20-2012, 07:17 PM

Quote:

Originally Posted by billet370

so what section of that bar do i remove, if its divided like that? just around the boot??

On the long boot there is a metal strap cut it and slide the boot back then you will see a washer that is bent over as a lock (sort of)after bending it out of the way then use a big wrench to unscrew the inner tie rod it comes off righty tighty lefty loosey.

ChrisSlicks · 01-20-2012, 08:22 PM

Quote:

Originally Posted by Baer383

On the long boot there is a metal strap cut it and slide the boot back then you will see a washer that is bent over as a lock (sort of)after bending it out of the way then use a big wrench to unscrew the inner tie rod it comes off righty tighty lefty loosey.

Good description Baer.

Make sure to use medium strength thread sealant on the replacement if it isn't pre-applied. Torque to approximately 68 lb/ft.

You'll need a new wire for the boot, the instructions for re-installing the boot are described on page ST-22, 23.

Baer383 · 01-20-2012, 08:33 PM

Quote:

Originally Posted by ChrisSlicks

Good description Baer.

Make sure to use medium strength thread sealant on the replacement if it isn't pre-applied. Torque to approximately 68 lb/ft.

You'll need a new wire for the boot, the instructions for re-installing the boot are described on page ST-22, 23.

You won't need any thread sealant that is what the bent over washer does.

Carbon_z · 01-20-2012, 08:39 PM

awesome thanks guys... at-least working on it wont be too difficult with the huge opening I have

. Any idea were to buy it from other than nissan? didnt know if there was an aftermarket version or etc.

ChrisSlicks · 01-20-2012, 08:56 PM

I checked the usual parts outlets but they didn't have it.

Googling I found these two, not sure about the company as I've never done business with them. Might want to do a little research first.

2010 NISSAN 370Z Right Inner Steering Tie Rod End
2010 Nissan 370z Inner tie rod

01-20-2012, 06:44 AM	#2 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 654	Looks like it broke the inner tie rod. Nissan calls it something weird like "inner socket". It may come with new seals or may require them separately. Follow the torque specs, you don't want to over tighten this one or you'll be in for the $900 steering rack. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

01-20-2012, 06:48 AM	#3 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,694 Drives: Carbon Fiber 370z Rep Power: 19	so the inner socket should fix it?? because there's a weird pin-type thing poking out of the boot. Ive never changed one but can obviously i can just need to know if that's damage that is still fixable with the inner socket kit.... __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

01-20-2012, 06:51 AM	#4 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 654	Hard to tell the extent of the damage from the picture. The pin may have pierced the boot from being bent, it also could have damaged the gears in the rack, hard to say. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

01-20-2012, 06:53 AM	#6 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,694 Drives: Carbon Fiber 370z Rep Power: 19	well I can tell you this... The car is on blocks since one wheel is missing. But even when car is off and not even moving, you can turn the steering wheel. is that related to that or pressure being gone. __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

01-20-2012, 07:08 AM	#7 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 654	Yes the steering will be fairly light as there is no resistance. You get the same thing if you just jack the front of the car in the air. You have even less resistance as the steering rack isn't even attached to anything on that side. I guess I would go try replace the inner tie rod first, it is about $80. Your sway bar looks okay actually, just looks like the end link broke. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

01-20-2012, 11:41 AM	#9 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 18	Def a tie-rod as Chris said... no need to replace rack (unless it is bent).

01-20-2012, 12:28 PM	#10 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,694 Drives: Carbon Fiber 370z Rep Power: 19	so what section of that bar do i remove, if its divided like that? just around the boot?? __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

01-20-2012, 08:39 PM	#14 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,694 Drives: Carbon Fiber 370z Rep Power: 19	awesome thanks guys... at-least working on it wont be too difficult with the huge opening I have . Any idea were to buy it from other than nissan? didnt know if there was an aftermarket version or etc. __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

01-20-2012, 08:56 PM	#15 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 654	I checked the usual parts outlets but they didn't have it. Googling I found these two, not sure about the company as I've never done business with them. Might want to do a little research first. 2010 NISSAN 370Z Right Inner Steering Tie Rod End 2010 Nissan 370z Inner tie rod __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Top Gear USA - Lamborghini - "Riding With The Bulls" Sneak Peak	Waiz	Other Vehicles	31	09-26-2010 11:41 PM
Top Gear says "Worst Car EVER Made"	Matt	Other Vehicles	24	06-28-2010 11:18 AM
FS- More oil!!! Motul 300V 5W30 "power racing"	SE	Parts for sale (Private Classifieds)	5	05-09-2010 07:50 PM
Toronto "shift into gear" Nissan	BjjKing	Canada	2	10-05-2009 08:00 PM
"25 awesome Jeremy Clarkson quotes" (Top gear)	frost	The Lounge (Off Topic)	12	08-26-2009 10:21 PM