Whiteline Sway Bars are AMAZING

Philipp · 04-16-2012, 09:53 PM

Quote:

Originally Posted by M.Bonanni

I don't have the end links yet. They probably won't make a massive difference, they will just allow you to optimize the effectiveness of the bar and take tension off of the end links so they don't break.

Mike,
Got the sway bars installed today. Frt & bck set to the softest settings. I could feel the difference coming out of the garage! Initial feedback is that the car feel a lot more "seatted" around highway exist or even when changing lanes!

Fitting with the FI CBE is no issue at all.

The endlinks looked like a "generic" product with lost of adjustments avail. I set it up same as OEM. Anyway, they are a big improvment over the stock ones...
Will probably move into the medium rear setting before my next track day.
I haven't weighted them but they are around 35% heavier than stocks.
Phil

sfearl1 · 04-16-2012, 10:12 PM

To those running the Whitelines, did anybody install the lateral locks?

tonybui · 04-17-2012, 05:02 AM

Anyone got a good deal on these?

GaleForce · 04-17-2012, 08:07 AM

Quote:

Originally Posted by sfearl1

To those running the Whitelines, did anybody install the lateral locks?

I use them on the front, but not the rear.

GaleForce · 04-17-2012, 08:07 AM

Quote:

Originally Posted by tonybui

Anyone got a good deal on these?

Try Jomer at FBNissan he gave me a good deal.

sfearl1 · 04-17-2012, 08:50 AM

Quote:

Originally Posted by GaleForce

I use them on the front, but not the rear.

why not the rear? and did you put these on after the fact, or do them at install time? there isn't much information out there on these.

GaleForce · 04-17-2012, 09:34 AM

Quote:

Originally Posted by sfearl1

why not the rear? and did you put these on after the fact, or do them at install time? there isn't much information out there on these.

The rears are an option. They come with a small bushing with a retainer clip to use as a stop/lock. The fronts come with locks but they are in a raw finish (not anodized). I installed everything at the same time.

sfearl1 · 04-17-2012, 10:02 AM

Quote:

Originally Posted by GaleForce

The rears are an option. They come with a small bushing with a retainer clip to use as a stop/lock. The fronts come with locks but they are in a raw finish (not anodized). I installed everything at the same time.

ok, what i'm taking from it, they are an optional piece. i'll go ahead and pick up a set for fr/r just to be on the safe side.

thank you for clarifying (sent some rep your way)

GaleForce · 04-17-2012, 01:36 PM

Quote:

Originally Posted by sfearl1

ok, what i'm taking from it, they are an optional piece. i'll go ahead and pick up a set for fr/r just to be on the safe side.

thank you for clarifying (sent some rep your way)

You don't need to get the locks for the front unless you want the anodized colour. The front swaybar comes with silver coloured locks.

Thanks for the rep

Philipp · 05-16-2012, 01:27 PM

Quote:

Originally Posted by sfearl1

To those running the Whitelines, did anybody install the lateral locks?

I did, and it was a mistake... at least if your track the car. During tracking the front sb are moving way too much and the locks actually pop the bushings out

.
Does anybody knows what they're for anyway?

Dwnshift · 05-16-2012, 01:47 PM

They keep the bar from shifting lateraly...so u will want to run them.
Dwnshift

Philipp · 05-16-2012, 01:52 PM

Quote:

Originally Posted by Dwnshift

They keep the bar from shifting lateraly...so u will want to run them.
Dwnshift

Then, i must have done something wrong... Are they installed on the outer or inner side and what is the required spce (if any) between the bushings and the locks? Thx

Dwnshift · 05-16-2012, 08:12 PM

Typically they would be installed on the inside and up close to the bushings.
Make sure your sway bar bushing bracket bolts are torqued to their proper specs.
I'm not familiar with the Whiteline bars... But when I was w 350evo we had those same exact locks included with our sway bars. Again.... Double check those brackets and how the bushings sit in them.
Dwnshift

370zDR · 05-27-2012, 12:58 PM

I just installed a set of Stillen bars, but have yet to hit the track, on the street I didn't feel much difference between them and stock (Set front to midle and Rear to Soft)

I was reading thru this thread and see most of you running whiteline bars are doing Soft Front and middle rear, I want to run my bars as close to this specs as possible, using this chart, what would be the equivalent or closest setup on the Stillen Bars??

Germanguy · 07-24-2012, 08:05 AM

I had the hotchkis swaybars on my 350z. On bad roads it made a "knickknack"-noise. After I changed the oem endlinks to aftermarket sport endlinks the problems was fixed.

Will I have this problem with the whiteline sways on my 370z also?

Thank you!

04-16-2012, 10:12 PM	#47 (permalink)
sfearl1 A True Z Fanatic Join Date: Oct 2011 Location: St. Louis Posts: 2,300 Drives: 2013 FBO E85 GTR Rep Power: 18	To those running the Whitelines, did anybody install the lateral locks? __________________ Scott Last edited by sfearl1; 04-16-2012 at 10:33 PM.

05-27-2012, 12:58 PM	#59 (permalink)
370zDR Base Member Join Date: May 2012 Location: Santo Domingo, D.R Posts: 69 Drives: 2009 370Z Rep Power: 13	I just installed a set of Stillen bars, but have yet to hit the track, on the street I didn't feel much difference between them and stock (Set front to midle and Rear to Soft) I was reading thru this thread and see most of you running whiteline bars are doing Soft Front and middle rear, I want to run my bars as close to this specs as possible, using this chart, what would be the equivalent or closest setup on the Stillen Bars?? __________________ Uprev/F.I CBE 18"/Art Pipes/G3's/NST Pulleys/Z1cooler 25R/Tein's/20mm Ichiba/Stillen Sways/275-305's/Motul 600/Red Calipers/Matte Wheels & Handles/Stillen Splitter/S-Tune Skirts/Shine Rears/Blackout Headlights,fangs and Valance/Evo-R Fog/Project Mu

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ready to buy: Whiteline or Hotchkis Sway Bars?	NewYorkJon34	Brakes & Suspension	85	09-08-2019 09:06 PM
Whiteline Sway Bars for 09-10 Nissan 370Z	ERZperformance	Suspension/Brakes	71	09-03-2012 06:59 PM
Whiteline sway bars installed	markymark	Brakes & Suspension	12	03-05-2012 07:04 PM
Whiteline Adjustable Sway Bars \| Tunerz Store	Tunerz_Store	Suspension/Brakes	63	11-03-2011 10:59 PM

04-17-2012, 05:02 AM	#48 (permalink)
tonybui A True Z Fanatic Join Date: May 2009 Location: Maryland Posts: 1,397 Drives: 09 Sports 6 Speed Rep Power: 427	Anyone got a good deal on these?

05-16-2012, 01:47 PM	#56 (permalink)
Dwnshift Track Member Join Date: Feb 2012 Location: Cincy Posts: 717 Drives: NISMO 370Z RC Rep Power: 14	They keep the bar from shifting lateraly...so u will want to run them. Dwnshift

05-16-2012, 08:12 PM	#58 (permalink)
Dwnshift Track Member Join Date: Feb 2012 Location: Cincy Posts: 717 Drives: NISMO 370Z RC Rep Power: 14	Typically they would be installed on the inside and up close to the bushings. Make sure your sway bar bushing bracket bolts are torqued to their proper specs. I'm not familiar with the Whiteline bars... But when I was w 350evo we had those same exact locks included with our sway bars. Again.... Double check those brackets and how the bushings sit in them. Dwnshift

07-24-2012, 08:05 AM	#60 (permalink)
Germanguy Base Member Join Date: Nov 2010 Location: Germany Posts: 67 Drives: 07 350z Rep Power: 14	I had the hotchkis swaybars on my 350z. On bad roads it made a "knickknack"-noise. After I changed the oem endlinks to aftermarket sport endlinks the problems was fixed. Will I have this problem with the whiteline sways on my 370z also? Thank you!