KONI Yellows: seeking spring compressor recommendations

onzedge · 01-17-2012, 01:26 PM

Quote:

Originally Posted by kenchan

hahaha.

so you have an impact gun/breaker bar and everything else? sockets, socket adapters, ratchet, etc?

not only that mr. onzedge jr - ASE certified master-tech can do installs and alignment!

Yep.

dAvenue · 01-17-2012, 02:25 PM

Quote:

Originally Posted by onzedge

Bring it out to Sacramento -- we have a nice wall-mounted spring compressor you can use.

I would love to drive to Cali and take you up on that. The only problem is the time it takes to get there.

Quote:

Originally Posted by kenchan

hahaha.

so you have an impact gun/breaker bar and everything else? sockets, socket adapters, ratchet, etc?

Totally. I have everything but an impact gun...and a vice.

Definitely need to get one of those to hold the shock.

Alchemy · 01-17-2012, 02:37 PM

Quote:

Originally Posted by dAvenue

I would love to drive to Cali and take you up on that. The only problem is the time it takes to get there.

Totally. I have everything but an impact gun...and a vice.

Definitely need to get one of those to hold the shock.

I did my Swifts without a vice. Just laid it on the ground and had at it.

xgrudgex · 01-17-2012, 02:54 PM

Same here with my swifts.

Unfortunately I had the big ol block spring compressors from craftsman... omg getting stockers off ez... getting swifts on and getting them big ol blocks off... not so ez lol

Quote:

Originally Posted by Alchemy

I did my Swifts without a vice. Just laid it on the ground and had at it.

Alchemy · 01-17-2012, 02:57 PM

My Swift install went easy. Too bad Koni's werent out when I got my Swifts so I could have done it once instead of twice!

dAvenue · 01-17-2012, 02:57 PM

Quote:

Originally Posted by Alchemy

I did my Swifts without a vice. Just laid it on the ground and had at it.

Hellz yes!

onzedge · 01-17-2012, 02:59 PM

My offer is still open:

Alchemy · 01-17-2012, 03:00 PM

Quote:

Originally Posted by dAvenue

Hellz yes!

Lol, yeah screw the vice dude

Alchemy · 01-17-2012, 03:01 PM

Quote:

Originally Posted by onzedge

My offer is still open:

This is ideal though

kenchan · 01-17-2012, 03:51 PM

Quote:

Originally Posted by dAvenue

I would love to drive to Cali and take you up on that. The only problem is the time it takes to get there.

Totally. I have everything but an impact gun...and a vice.

Definitely need to get one of those to hold the shock.

blah, you dont really need a vise, do you?

one tip i usually tell folks is crack loose the front strut top shaft nut while it's still on the car.

and i suppose the other tip is to mark the strut top tower bolt to the car to make the orientation easier when you put the strut back together.

kenchan · 01-17-2012, 03:54 PM

Quote:

Originally Posted by Alchemy

This is ideal though

yah. if i was in sac i would just bring my car and wallet over and just watch and sip on coffee while i wait.

these days i dont want sore up my hands cause i play music as a hobby.

dAvenue · 01-21-2012, 10:04 PM

Installed them on the rears today and geez Louis I'm exhausted! I'll get the fronts done tomorrow.

onzedge · 01-21-2012, 10:13 PM

Quote:

Originally Posted by dAvenue

Installed them on the rears today and geez Louis I'm exhausted! I'll get the fronts done tomorrow.

dAvenue · 01-22-2012, 11:46 AM

Pics are being taken and I'll post them up soon.

I'm trying to convince myself to continue work today, though (my back is ailing me). Torquing the nut to spec on the top hat is a PITA. I had to lay it on the ground and hold the assembly in place with my foot while I torqued it. I assume a vice would help with that and I might give it a try.

Alchemy · 01-22-2012, 03:29 PM

Struggle through it!! Im dying to hear the results. +1 for your troubles.

01-17-2012, 02:57 PM	#20 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 44 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	My Swift install went easy. Too bad Koni's werent out when I got my Swifts so I could have done it once instead of twice! __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

01-17-2012, 02:59 PM	#22 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 64 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684736	My offer is still open: __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

01-21-2012, 10:04 PM	#27 (permalink)
dAvenue A True Z Fanatic Join Date: Aug 2010 Location: present Posts: 1,971 Drives: angry Rep Power: 49	Installed them on the rears today and geez Louis I'm exhausted! I'll get the fronts done tomorrow. __________________ Takeda \| Stillen \| Z1 \| Invidia \| Mishimoto \| CSF \| Megan Racing \| Koni \| Eibach \| SPC \| Forgestar \| Seibon

01-22-2012, 11:46 AM	#29 (permalink)
dAvenue A True Z Fanatic Join Date: Aug 2010 Location: present Posts: 1,971 Drives: angry Rep Power: 49	Pics are being taken and I'll post them up soon. I'm trying to convince myself to continue work today, though (my back is ailing me). Torquing the nut to spec on the top hat is a PITA. I had to lay it on the ground and hold the assembly in place with my foot while I torqued it. I assume a vice would help with that and I might give it a try. __________________ Takeda \| Stillen \| Z1 \| Invidia \| Mishimoto \| CSF \| Megan Racing \| Koni \| Eibach \| SPC \| Forgestar \| Seibon

01-22-2012, 03:29 PM	#30 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 44 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	Struggle through it!! Im dying to hear the results. +1 for your troubles. __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How many 09 Yellows?	IMMIRU	New 370Z Owner	8	02-04-2017 08:09 AM
Info on the KONI’s yellows?	lastblueprint	Brakes & Suspension	63	01-12-2012 07:03 PM
Koni Release Timing?	2ZORNT2Z	Brakes & Suspension	5	08-26-2010 05:27 PM
Custom Koni valving	willtangclan	Brakes & Suspension	3	06-08-2010 11:01 AM
A/C compressor..	Chan Chee Hoe	Nissan 370Z General Discussions	5	12-06-2009 01:21 PM