Anyone have Ichiba front camber arms?

Flushnismo · 11-30-2011, 02:01 PM

Trying to find out if anyone has the Ichiba front camber arms?.. are they good quality? any problems?

Thanks

bernardio · 11-30-2011, 02:17 PM

I just got a set delivered and they are designed just like the SPC ones. I'd imagine the quality would be about the same as well. I'll update when I get a change to install and put a good amount of miles behind them.

Flushnismo · 11-30-2011, 02:20 PM

Quote:

Originally Posted by bernardio

I just got a set delivered and they are designed just like the SPC ones. I'd imagine the quality would be about the same as well. I'll update when I get a change to install and put a good amount of miles behind them.

Cool thanks

bernardio · 12-03-2011, 02:57 PM

Well I found some time last night to install the front camber kit and had a few concerns.

1. The rubber bushings that joins the arms to the frame seem very stiff. When the bolts are torqued down, the arms do not rotate as much at the stock arms. I tried to position the arm in a neutral position for my ride height, but it felt like the bushings were really strained to handle the full suspension droop of the stock shocks while the car was on jack stands. Did anyone with the SPC arms notice this as well?

2. There are 12-positions for caster(and secondary toe) selected by spinning the ball joint assembly in a keyed plate. One ball joint assembly was machined with a ~15 degree offset so the left will never match the right...

They do seem pretty solid and allow me to get close to 0 camber. I'll have a better idea about the arms after an alignment and a few weeks on the road.

bernardio · 12-22-2011, 11:14 PM

Quick update: Ichiba was nice enough to replace the funky ball joint and now my caster issue is resolved. I've been running the kit for a few weeks on the streets and have not had any problems with the camber adjustment slipping. I've got no regrets going with Ichiba. Now I just gotta find some time to install the rear arms and tow bolts!

Diesel370 · 12-24-2011, 07:58 AM

I would steer very clear of Ichiba products. It's nothing but low grade Chinese garbage. Eventually the rubber bushings on them will fail like they did on mine and if you are not careful their suspension products might even KILL YOU!!!!

Ichiba rear camber arms almost killed me - G35Driver

bernardio · 12-24-2011, 02:35 PM

whoa.. I can handle the front bushings wearing out, but the rear arms snapping? maybe I'll hold off on installing those.

threeseventy · 12-30-2011, 10:05 AM

[QUOTE=Diesel370;1461838]I would steer very clear of Ichiba products. It's nothing but low grade Chinese garbage. Eventually the rubber bushings on them will fail like they did on mine and if you are not careful their suspension products might even KILL YOU!!!!

Ichiba rear camber arms almost killed me - G35Driver

Great post. Thanks for saving my ***. +1 rep.

Diesel370 · 12-30-2011, 10:31 AM

Quote:

Originally Posted by bernardio

whoa.. I can handle the front bushings wearing out, but the rear arms snapping? maybe I'll hold off on installing those.

Trust me, you will not be able to handle the bushings wearing out. After awhile you will get sick of the loud clunking noises coming from your failed Ichiba camber arms.

And the camber adjustment on these are terrible. I am lowered 1 inch and my Ichiba arms are at the max adjustment and I'm still not at OEM camber spec. $300 down the drain on these arms that not only failed but couldn't even do it's intended job of getting me back to OEM specs.

black_sedan · 12-30-2011, 02:03 PM

Quote:

Originally Posted by Diesel370

Trust me, you will not be able to handle the bushings wearing out. After awhile you will get sick of the loud clunking noises coming from your failed Ichiba camber arms.

And the camber adjustment on these are terrible. I am lowered 1 inch and my Ichiba arms are at the max adjustment and I'm still not at OEM camber spec. $300 down the drain on these arms that not only failed but couldn't even do it's intended job of getting me back to OEM specs.

how much adjustment did you actually get from the Ichiba arms? Did the bushings on yours actually fail?

bernardio · 12-30-2011, 05:00 PM

Strange, I was able to get around 1deg neg camber easy in the front on my 370. You might need to spin the caster adjustment 180 degrees to get within stock range.. or they gave you the wrong/bad arms.

I'll check my bushing periodically for damage or slipping and let you know how they hold up, but I have a feeling they'll be fine.

Diesel370 · 12-30-2011, 07:48 PM

Quote:

Originally Posted by black_sedan

how much adjustment did you actually get from the Ichiba arms? Did the bushings on yours actually fail?

Around a .5 to .8 adjustment. What do you mean did the bushings "actually" fail? As you can see from the pics the bushings did not hold the arm in the center causing the arm to push against the metal part in the fenders which will cause all kinds of clunking noises during everyday driving.

Diesel370 · 12-30-2011, 07:50 PM

Quote:

Originally Posted by bernardio

Strange, I was able to get around 1deg neg camber easy in the front on my 370. You might need to spin the caster adjustment 180 degrees to get within stock range.. or they gave you the wrong/bad arms.

I'll check my bushing periodically for damage or slipping and let you know how they hold up, but I have a feeling they'll be fine.

Pretty sure I am at max adjustment. I'll take pics of the top of the arm to show you where they are set at.

black_sedan · 12-31-2011, 10:44 AM

Quote:

Originally Posted by Diesel370

Around a .5 to .8 adjustment. What do you mean did the bushings "actually" fail? As you can see from the pics the bushings did not hold the arm in the center causing the arm to push against the metal part in the fenders which will cause all kinds of clunking noises during everyday driving.

Thanks. Good info. Wasnt able to see the pics on my work pc, but i can see them now.

Diesel370 · 12-31-2011, 12:07 PM

Quote:

Originally Posted by bernardio

Strange, I was able to get around 1deg neg camber easy in the front on my 370. You might need to spin the caster adjustment 180 degrees to get within stock range.. or they gave you the wrong/bad arms.

I'll check my bushing periodically for damage or slipping and let you know how they hold up, but I have a feeling they'll be fine.

Ok here are the pics showing the plate on the arm at the farthest point I could put it without having to do some type of modification to the plate. Does yours look like this at max?

11-30-2011, 02:01 PM	#1 (permalink)
Flushnismo A True Z Fanatic Join Date: Dec 2010 Location: Amarillo, TX Posts: 1,041 Drives: 2010 Boosted 40th Rep Power: 17	Anyone have Ichiba front camber arms? Trying to find out if anyone has the Ichiba front camber arms?.. are they good quality? any problems? Thanks __________________ AeroJacket l BC Racing l B&M l K&N l EVO-R l TWM Performance l Tanabe l AAM l Drop Engineering l Zenclosure

11-30-2011, 02:17 PM	#2 (permalink)
bernardio Base Member Join Date: Oct 2011 Location: San Ramon, CA Posts: 45 Drives: 11 370z PW T SP M6 Rep Power: 14	I just got a set delivered and they are designed just like the SPC ones. I'd imagine the quality would be about the same as well. I'll update when I get a change to install and put a good amount of miles behind them. __________________ - Bernard *2011 370Z Pearl White Touring Sport 6MT* My Gallery and Build Journal

12-03-2011, 02:57 PM	#4 (permalink)
bernardio Base Member Join Date: Oct 2011 Location: San Ramon, CA Posts: 45 Drives: 11 370z PW T SP M6 Rep Power: 14	Well I found some time last night to install the front camber kit and had a few concerns. 1. The rubber bushings that joins the arms to the frame seem very stiff. When the bolts are torqued down, the arms do not rotate as much at the stock arms. I tried to position the arm in a neutral position for my ride height, but it felt like the bushings were really strained to handle the full suspension droop of the stock shocks while the car was on jack stands. Did anyone with the SPC arms notice this as well? 2. There are 12-positions for caster(and secondary toe) selected by spinning the ball joint assembly in a keyed plate. One ball joint assembly was machined with a ~15 degree offset so the left will never match the right... They do seem pretty solid and allow me to get close to 0 camber. I'll have a better idea about the arms after an alignment and a few weeks on the road. __________________ - Bernard *2011 370Z Pearl White Touring Sport 6MT* My Gallery and Build Journal

12-22-2011, 11:14 PM	#5 (permalink)
bernardio Base Member Join Date: Oct 2011 Location: San Ramon, CA Posts: 45 Drives: 11 370z PW T SP M6 Rep Power: 14	Quick update: Ichiba was nice enough to replace the funky ball joint and now my caster issue is resolved. I've been running the kit for a few weeks on the streets and have not had any problems with the camber adjustment slipping. I've got no regrets going with Ichiba. Now I just gotta find some time to install the rear arms and tow bolts! __________________ - Bernard *2011 370Z Pearl White Touring Sport 6MT* My Gallery and Build Journal

12-24-2011, 02:35 PM	#7 (permalink)
bernardio Base Member Join Date: Oct 2011 Location: San Ramon, CA Posts: 45 Drives: 11 370z PW T SP M6 Rep Power: 14	whoa.. I can handle the front bushings wearing out, but the rear arms snapping? maybe I'll hold off on installing those. __________________ - Bernard *2011 370Z Pearl White Touring Sport 6MT* My Gallery and Build Journal

12-24-2011, 07:58 AM	#6 (permalink)
Diesel370 Base Member Join Date: Dec 2008 Location: Florida Posts: 94 Drives: 350z Rep Power: 17	I would steer very clear of Ichiba products. It's nothing but low grade Chinese garbage. Eventually the rubber bushings on them will fail like they did on mine and if you are not careful their suspension products might even KILL YOU!!!! Ichiba rear camber arms almost killed me - G35Driver

12-30-2011, 10:05 AM	#8 (permalink)
threeseventy Track Member Join Date: Mar 2011 Location: Huntington Beach, CA Posts: 600 Drives: Opinion Rep Power: 16	[QUOTE=Diesel370;1461838]I would steer very clear of Ichiba products. It's nothing but low grade Chinese garbage. Eventually the rubber bushings on them will fail like they did on mine and if you are not careful their suspension products might even KILL YOU!!!! Ichiba rear camber arms almost killed me - G35Driver Great post. Thanks for saving my ***. +1 rep.

12-30-2011, 05:00 PM	#11 (permalink)
bernardio Base Member Join Date: Oct 2011 Location: San Ramon, CA Posts: 45 Drives: 11 370z PW T SP M6 Rep Power: 14	Strange, I was able to get around 1deg neg camber easy in the front on my 370. You might need to spin the caster adjustment 180 degrees to get within stock range.. or they gave you the wrong/bad arms. I'll check my bushing periodically for damage or slipping and let you know how they hold up, but I have a feeling they'll be fine. __________________ - Bernard *2011 370Z Pearl White Touring Sport 6MT* My Gallery and Build Journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Have any of you actually used Ichiba rear camber arms for your 370Z?	TMAN1985	Brakes & Suspension	11	12-30-2011 10:12 AM
[WTB] SPC Front Camber Arms	M.Bonanni	Parts for sale (Private Classifieds)	4	10-08-2011 08:30 PM
[WTB] WTB: Front camber arms	JPnAZ	Parts for sale (Private Classifieds)	0	09-08-2011 11:51 AM
Front camber arms	bucketman	Brakes & Suspension	7	08-03-2010 03:56 PM