Small bolt and spacer on the brake rotor.?

JDV500 · 11-26-2011, 09:00 AM

While replacing wheel studs yesterday on the front of my 370, i noticed a small bolt and metal spacer tube approx 1/2" long thats threaded to the rotor, goes into the rotor, maybe 2 full turns. just in 1 spot inbetween two of the lug holes. It sits there by itself, i'm curious to know what this is for, is it balance, alignment of the wheel to the rotor.?

Appreciate any feedback..

Ages · 11-26-2011, 09:27 AM

It's there so that People can't put rear wheels up front. I remove it to put on my winter wheels.

JDV500 · 11-26-2011, 09:34 AM

Ah, ok good deal. makes sense now. thanks..

wutfun · 12-22-2011, 11:43 AM

yeah...I noticed the same thing when putting on my winter rims...just removed the bolt.

Jsolo · 12-22-2011, 02:33 PM

I don't believe this bolt serves any useful functional purpose other than as stated above. Remove it and store it in a bag with the other parts from various modifications (ie clutch pedal spring)

Btw, did any of you noticed (doubt it makes any difference), but the valve stem on the oe wheels is aligned to the same position as this bolt. That is, if the bolt is at 12oclock, so is the valve stem (assuming of course this is the first time you've removed the wheels).

11-26-2011, 09:00 AM	#1 (permalink)
JDV500 Base Member Join Date: Nov 2011 Location: Huntsville, Alabama Age: 61 Posts: 31 Drives: 2011 370z,2010 F-250 Rep Power: 14	Small bolt and spacer on the brake rotor.? While replacing wheel studs yesterday on the front of my 370, i noticed a small bolt and metal spacer tube approx 1/2" long thats threaded to the rotor, goes into the rotor, maybe 2 full turns. just in 1 spot inbetween two of the lug holes. It sits there by itself, i'm curious to know what this is for, is it balance, alignment of the wheel to the rotor.? Appreciate any feedback.. __________________ Joe, Owens Crossroads, Ala

11-26-2011, 09:34 AM	#3 (permalink)
JDV500 Base Member Join Date: Nov 2011 Location: Huntsville, Alabama Age: 61 Posts: 31 Drives: 2011 370z,2010 F-250 Rep Power: 14	Ah, ok good deal. makes sense now. thanks.. __________________ Joe, Owens Crossroads, Ala

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Brake rotor replacement (front)	ChrisSlicks	DIY Section (Do-It-Yourself)	63	02-10-2017 08:19 AM
Who here is running a small spacer? <7mm?	FreshFish	Wheels & Tires	8	10-03-2011 12:41 PM
Base model brake rotor upgrade question	TonyBPD	Brakes & Suspension	6	07-21-2011 03:03 PM
Rotor Cleaning	Bodytechz	Brakes & Suspension	4	04-08-2011 10:46 PM
Best option rotor?	370z_2910	Brakes & Suspension	3	03-07-2011 06:09 PM

11-26-2011, 09:27 AM	#2 (permalink)
Ages Base Member Join Date: Oct 2011 Location: MA Posts: 184 Drives: 11 370Z SP MT Gunmet Rep Power: 14	It's there so that People can't put rear wheels up front. I remove it to put on my winter wheels.

12-22-2011, 11:43 AM	#4 (permalink)
wutfun Base Member Join Date: Dec 2011 Location: Toronto, Canada Posts: 53 Drives: 2011 Nissan 370z Rep Power: 14	yeah...I noticed the same thing when putting on my winter rims...just removed the bolt.

12-22-2011, 02:33 PM	#5 (permalink)
Jsolo Track Member Join Date: Dec 2011 Location: chicago Posts: 783 Drives: '12 G37 6MT Rep Power: 15	I don't believe this bolt serves any useful functional purpose other than as stated above. Remove it and store it in a bag with the other parts from various modifications (ie clutch pedal spring) Btw, did any of you noticed (doubt it makes any difference), but the valve stem on the oe wheels is aligned to the same position as this bolt. That is, if the bolt is at 12oclock, so is the valve stem (assuming of course this is the first time you've removed the wheels).