Flush Spacerss?

Miki · 10-04-2011, 11:32 AM

Looking to drop my car on stance coilovers! Going to keep the sport package rays for now until I save enough for rims. Does anyone know what brand and size front and back will make my car look as flush as possible? pictures would be good to see!

tjlazer · 10-04-2011, 11:51 AM

25mm, all brands are the same as far as sizing goes.

I recommend 20mm front and rear. Project kics or HR spacers.

kenchan · 10-04-2011, 12:14 PM

ill toss in my coin for Eibach spacers as well. no issue.

evets · 10-04-2011, 12:43 PM

Let me throw in Ichiba spacers. I went 20mm front and 25mm back (18 inch stock wheels).

Miki · 10-04-2011, 12:50 PM

Which one is most likely not to cause damage tho to the rim I mean.. Im thinking of going 20 front and 25 rear.

RedBullRR · 10-04-2011, 01:18 PM

I went with H&R Replaced Bolts in front and Rears were Bolt on. 20 Front 25 Rear.

kenchan · 10-04-2011, 02:08 PM

Quote:

Originally Posted by Miki

Which one is most likely not to cause damage tho to the rim I mean.. Im thinking of going 20 front and 25 rear.

all of them should work. i will mention that i had like 1.5mm of clearance issue on the front using 20mm spacers as my stock stud was hitting the back disc area of the stock sport 19s.

i just grinded the back of the wheel with my dremel. no issue.
you can choose to do that or grind the stud instead since you wont be using the tip of the stock stud to hold the spacers anyway.

some folks commented they had no clearance issue so im thinking some production lot cars had a tad longer studs.

Miki · 10-04-2011, 07:10 PM

Clearance issue in the front as in rubbing? or what. Like how low were you running your car then? Cause im not looking to cause any problems, just looking to make it look nicer while in the meantime saving up for some 20s.

Baer383 · 10-04-2011, 08:30 PM

I had all the above listed spacers and the ones I run now are from Z1 Motor sports great quality and best price over any I've seen.

sfearl1 · 11-28-2011, 10:29 PM

Quote:

Originally Posted by Baer383

I had all the above listed spacers and the ones I run now are from Z1 Motor sports great quality and best price over any I've seen.

Did the 20mm Z1's fit the front? Assuming they're the bolt-ons and not the stud replacements.

vividracing · 11-30-2011, 06:56 PM

I'm a big fan of H&R spacers. I've seen the hub rings broken off of other spacers, which is a PITA to deal with. 20mm front, 25mm rear gives the best look on stock wheels imo. We've got good pricing on the H&Rs and usually have them in stock.

fuct · 12-02-2011, 03:03 PM

Quote:

Originally Posted by vividracing

I'm a big fan of H&R spacers. I've seen the hub rings broken off of other spacers, which is a PITA to deal with. 20mm front, 25mm rear gives the best look on stock wheels imo. We've got good pricing on the H&Rs and usually have them in stock.

Theres a thread about the H&R hub rings breaking off too.

H&R Spacer... Lip shaved/broke off?!

Imperial · 12-09-2011, 05:00 AM

I can confirm that 20mm H&R bolt-on spacers will work in the front with no fitment issues.

haitech · 12-09-2011, 05:16 PM

Depends on how much camber you want also

Baer383 · 12-09-2011, 07:49 PM

Quote:

Originally Posted by sfearl1

Did the 20mm Z1's fit the front? Assuming they're the bolt-ons and not the stud replacements.

Mine were stud replacement and I have 15mm front 10mm rear(aftermarket wheels)

10-04-2011, 11:32 AM	#1 (permalink)
Miki Base Member Join Date: Mar 2011 Location: Canada Posts: 119 Drives: Nissan 370z M6 White Rep Power: 14	Flush Spacerss? Looking to drop my car on stance coilovers! Going to keep the sport package rays for now until I save enough for rims. Does anyone know what brand and size front and back will make my car look as flush as possible? pictures would be good to see! Last edited by Miki; 10-04-2011 at 11:35 AM.

10-04-2011, 11:51 AM	#2 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 53 Posts: 2,496 Drives: Z34, R35 Rep Power: 20	25mm, all brands are the same as far as sizing goes. I recommend 20mm front and rear. Project kics or HR spacers. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

10-04-2011, 01:18 PM	#6 (permalink)
RedBullRR Enthusiast Member Join Date: Oct 2010 Location: Suffolk Posts: 336 Drives: 2010 370Z Red Rep Power: 15	I went with H&R Replaced Bolts in front and Rears were Bolt on. 20 Front 25 Rear. __________________ 2010 Solid Red Z: Mods: Stillen G3 Intakes \| BC Coilovers \| H&R 20/25 Spacers \| Stillen Splitter \| Stillen LW Pullie TBI \| Red GTR Start \| LED Interior \| Kenwood Double Din

10-04-2011, 08:30 PM	#9 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	I had all the above listed spacers and the ones I run now are from Z1 Motor sports great quality and best price over any I've seen. __________________ 2013 ZL1 754 rwhp 747 rwtq

11-30-2011, 06:56 PM	#11 (permalink)
vividracing The370Z.com Sponsor Join Date: Jun 2009 Location: Gilbert, AZ Age: 38 Posts: 7,306 Drives: 350Z,370Z,GTR Rep Power: 39	I'm a big fan of H&R spacers. I've seen the hub rings broken off of other spacers, which is a PITA to deal with. 20mm front, 25mm rear gives the best look on stock wheels imo. We've got good pricing on the H&Rs and usually have them in stock. __________________ Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!!

10-04-2011, 12:14 PM	#3 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	ill toss in my coin for Eibach spacers as well. no issue.

10-04-2011, 12:43 PM	#4 (permalink)
evets Base Member Join Date: Mar 2010 Location: Wisconsin Posts: 7 Drives: 07 Nissan 350Z AX M6 Rep Power: 15	Let me throw in Ichiba spacers. I went 20mm front and 25mm back (18 inch stock wheels).

10-04-2011, 12:50 PM	#5 (permalink)
Miki Base Member Join Date: Mar 2011 Location: Canada Posts: 119 Drives: Nissan 370z M6 White Rep Power: 14	Which one is most likely not to cause damage tho to the rim I mean.. Im thinking of going 20 front and 25 rear.

10-04-2011, 07:10 PM	#8 (permalink)
Miki Base Member Join Date: Mar 2011 Location: Canada Posts: 119 Drives: Nissan 370z M6 White Rep Power: 14	Clearance issue in the front as in rubbing? or what. Like how low were you running your car then? Cause im not looking to cause any problems, just looking to make it look nicer while in the meantime saving up for some 20s.

12-09-2011, 05:00 AM	#13 (permalink)
Imperial Enthusiast Member Join Date: Aug 2010 Location: Long Beach, CA Posts: 486 Drives: 10 Nismo 370Z PW M6 Rep Power: 15	I can confirm that 20mm H&R bolt-on spacers will work in the front with no fitment issues.

12-09-2011, 05:16 PM	#14 (permalink)
haitech Track Member Join Date: Sep 2011 Location: Austin/Dallas Posts: 922 Drives: 11' 370z Magnetic M6 Rep Power: 15	Depends on how much camber you want also

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hood Not Flush?	Amuse370	Nismo 370Z	12	03-18-2011 08:07 PM
Transmission Flush?	Nismoracer	Engine & Drivetrain	9	02-16-2011 01:17 PM
Flush or not?	drum1972	Wheels & Tires	10	10-21-2010 05:22 PM
Flush.	Gunzero	Wheels & Tires	22	06-27-2010 12:31 AM
hella flush G35	nogoodname	The Lounge (Off Topic)	122	09-19-2009 09:27 AM