Eibach Camber kit

ANMVQ · 09-20-2011, 07:07 AM

Hey does anyone have any info on these? Anyone runnning these? I can get a set -Front and rears for under $450 shipped, The SPC kit is over $600.

Any info will be very helpful,. Thanx guys

Fire · 09-20-2011, 02:48 PM

Is it the Pro Camber Kit? If so I have it on my car and they got me back to specs after dropping using the Eibach springs. I did have to show the shop where and how to install the rear kit, they took off the wrong link(the one infront of the rear tire) it went on easily when they removed the rear link.

ANMVQ · 09-21-2011, 06:31 AM

Yes it is.. Nice thanx,

ncheung85 · 09-21-2011, 09:15 PM

Eibach and spc are the samething....Dont you mean to compare spl and eibach? That spc kit cost way too much...

Well I got the "spc" kit and my spec was adjusted to factory spec with no problem. My ride height is about 26.5 inch (from the highest point of the fender to the floor) so it's about 1 1/2 inch lower than stock.

09-20-2011, 07:07 AM	#1 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Eibach Camber kit Hey does anyone have any info on these? Anyone runnning these? I can get a set -Front and rears for under $450 shipped, The SPC kit is over $600. Any info will be very helpful,. Thanx guys __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

09-20-2011, 02:48 PM	#2 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 43	Is it the Pro Camber Kit? If so I have it on my car and they got me back to specs after dropping using the Eibach springs. I did have to show the shop where and how to install the rear kit, they took off the wrong link(the one infront of the rear tire) it went on easily when they removed the rear link. __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

09-21-2011, 06:31 AM	#3 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Yes it is.. Nice thanx, __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

09-21-2011, 09:15 PM	#4 (permalink)
ncheung85 Enthusiast Member Join Date: Feb 2010 Location: Alhambra, CA Posts: 339 Drives: z Rep Power: 15	Eibach and spc are the samething....Dont you mean to compare spl and eibach? That spc kit cost way too much... Well I got the "spc" kit and my spec was adjusted to factory spec with no problem. My ride height is about 26.5 inch (from the highest point of the fender to the floor) so it's about 1 1/2 inch lower than stock. __________________ Injen \| Berk \| HKS \| Hotchkis \| Gtspec \| EVO-R \| Forgestar \| KW \| SPC \| Uprev Youtube

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Eibach/SPC with toe bolt camber kit	PapoZalsa	Parts for sale (Private Classifieds)	1	08-27-2011 04:07 PM
do you guys recommend a rear camber kit when installing Eibach springs?	ryanboy	Brakes & Suspension	9	04-06-2011 12:46 AM
camber arm or not.	COD4	Brakes & Suspension	0	02-17-2010 10:07 AM