Nissan 370Z Forum - Most probable spring w no need for cam kit

Page 3 of 3

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Brakes & Suspension (http://www.the370z.com/brakes-suspension/)

- - Most probable spring w no need for cam kit (http://www.the370z.com/brakes-suspension/42061-most-probable-spring-w-no-need-cam-kit.html)

CFZ	09-14-2011 11:48 AM

Factory spec is really mild. A little extra camber will not hurt. It will improve cornering speeds, and you shouldnt see that much more wear....

fuct	09-14-2011 02:23 PM

Quote:

Originally Posted by Red__Zed (Post 1309436)

Pretty much everybody sees this result...front camber changes very little with a drop. I was well in spec.

Do you think there is a sharp cutoff or something?

Again, I ran 2.6 degrees and saw totally even wear. Saw outside wear on the factory 1* setting.

if you did thats amazing!!! can you snap a pic of your wore tires next time you change them. id love to see how -2.6 camber in the rear causes even tire wear..

again it must be the wider tires and wheel on the nismo, if EVERYONE is seeing the same thing.

Red__Zed

09-14-2011 02:36 PM

Quote:

Originally Posted by fuct (Post 1313118)

I wound up with 1.5 up front, had been 1.3 before drop--still in "spec"

Here's 7.5k on 2.6 degrees

http://i36.photobucket.com/albums/e3...1/809d9306.jpg

fuct	09-15-2011 09:24 AM

thats impressive wear. wonder if my toes is eating up my insides. thx RedZed

Red__Zed

09-15-2011 09:26 AM

Yeah, I run very little toe. Min spec rear, and then 0* up front.

All times are GMT -5. The time now is 11:43 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page