Last week I had an HPDE and lapping evening back to back. I ran the car at Pacific Raceways which is a fairly technical track with approximately +130-140mph on the
|
|
LinkBack | Thread Tools | Display Modes |
07-17-2011, 03:02 PM | #1 (permalink) |
Track Member
Join Date: Jan 2009
Location: Snoqualmie WA
Posts: 973
Drives: 03 996TT Porsche
Rep Power: 606 |
Carbotech XP12 and XP10 with Stillen J-Hook Rotors
Last week I had an HPDE and lapping evening back to back. I ran the car at Pacific Raceways which is a fairly technical track with approximately +130-140mph on the main straight into the first turn (lots of braking and then following a +100mph downhill into a couple of very tight corners (tons more braking) followed by a back straight (again +100mph) into a chicane. These back to back sections seriously heated up my rotors due to the serious friction the XP12s and XP10s generated….essentially the Stillan J-Hooks were no match for the heat and warped.
What I did not do was apply the brakes while stopped or slowly rolling so I didn't motivate the warpage. My next course will be to add front cooling and turn the rotors….(before another rotor purchase) Thoughts?
__________________
Buddy Revell: "One man's sooner is another man's later" Last edited by Nikon FM; 07-17-2011 at 07:38 PM. |
07-17-2011, 03:28 PM | #2 (permalink) |
Administrator
Join Date: May 2009
Location: Disneyland, Ca
Posts: 8,732
Drives: 🔰
Rep Power: 10 |
I'm looking into upgrading from the stock sport pkg rotors soon and would have thought the J hooks were good enough but Now it has me questioning if I should spend the extra and go 2 piece rotors since the J hooks are one piece. I do push the Z on Canyons Cruises and have learned to be easy on the brakes and let the suspension do what its designed to do. I think some form of air duct cooling to the rotors would help but I think they may not be up to the task of serious tracking. IMO
|
07-17-2011, 04:05 PM | #3 (permalink) |
Enthusiast Member
Join Date: Nov 2010
Location: Seattle
Posts: 466
Drives: Nismo10,EgH22,TSX04
Rep Power: 15 |
Wow that is a shock, I was looking into the J's as well.
I'm thinking 2 piece as well now with a cross drilled section. My TSX sadly can stop just as fast as my nizzy. But I have cross drilled slot rotors with aggressive pads and steal braided lines and dot 4 fluid. But they have more under braking noise which is weird I thought. But Nikon thanks for the right up and I would contact stillen first before I turned them. You might loose the actual j hook slotting in it. Plus they might beable to do something for you. Plus a lot of people are against turning of sloted rotors Iduno but thanks for the info... Hope to meet ya someday gotta check out your beast..
__________________
2010NISMO•305.9whp 250tq Osirus•STANCE GR+•and Camber & Toe bars•KICS R 20mm•VOSSEN CV3 20"-10.5x4•Stillen GENIII•AAM S-Line Nimso mid-pipe•CarbonSignal Sponsored car•EVOR F1mirrors•NST short shifter•Zspeed Nismo under tray. |
07-17-2011, 05:51 PM | #4 (permalink) |
A True Z Fanatic
Join Date: Jun 2009
Location: californee way
Posts: 5,380
Drives: 370, Leaf
Rep Power: 30 |
2 piece is great if you have a race, pointless if you are just driving around town. Rotor is a heat sink, your best bet is to add ducting/cryo treat them and get the right pads
|
07-17-2011, 06:09 PM | #5 (permalink) | |
A True Z Fanatic
Join Date: Feb 2009
Location: FL
Posts: 4,776
Drives: Baby Shark
Rep Power: 701615 |
Quote:
STILL waiting for someone (stillen, am performance etc) to bring a well engineered brake ducting solution for the 370z to market.... |
|
07-17-2011, 07:37 PM | #6 (permalink) |
Track Member
Join Date: Jan 2009
Location: Snoqualmie WA
Posts: 973
Drives: 03 996TT Porsche
Rep Power: 606 |
Stillen (spelled it right this time) provided a set a free metal matrix pads when I bought the rotors. On the last lapping session (June) I used the metal matrix pads with the J-Hook rotors and all went well except I didn't have the stopping power and I went through the whole pad that day. The rotors survived and worked just fine with the lame pads.
Adding the high friction ie heat generator pads did the rotors in but I had great stopping ability and still did when the steering wheel started shuddering while braking. This situation occurred on a seriously aggressive track type setting. I don't know that the situation could be duplicated on normal roads.
__________________
Buddy Revell: "One man's sooner is another man's later" |
07-17-2011, 08:00 PM | #7 (permalink) | |
Enthusiast Member
Join Date: Nov 2010
Location: Seattle
Posts: 466
Drives: Nismo10,EgH22,TSX04
Rep Power: 15 |
Lol I bet I could come drive with me and my boys we drive like there are no cops ill hit 140 all the time I've been driving that way in all the cars ive ever built. My 95 eg goes 164 mph wit 224 at the front.
But I've even had the stock rotors already shake on me under braking. That's why I was looking for better. Braking is what makes your car faster then the next guy how well you can come in hot and pull through that corner. Quote:
__________________
2010NISMO•305.9whp 250tq Osirus•STANCE GR+•and Camber & Toe bars•KICS R 20mm•VOSSEN CV3 20"-10.5x4•Stillen GENIII•AAM S-Line Nimso mid-pipe•CarbonSignal Sponsored car•EVOR F1mirrors•NST short shifter•Zspeed Nismo under tray. |
|
07-17-2011, 08:43 PM | #9 (permalink) |
A True Z Fanatic
Join Date: Feb 2010
Location: Covington, GA
Age: 46
Posts: 14,844
Drives: Waiting on next Z
Rep Power: 221 |
Not saying you are but I wouldn't hate on the rotors. They took some hard beating as it sounds with some good pads.
I just wonder if it's best for me to just keep replacing my rotors with stock ones being I probably wouldn't be as hard on them as you guys? I'm trying to be a budget minded racer. I do want some Carbotech pads. Not as agressive as you have though. I know a lot og guys talk so highly of Carbotech and how there more rotor friendly than other pads. But heat is another thing I assume?
__________________
Last edited by SPOHN; 07-17-2011 at 08:52 PM. |
07-17-2011, 09:14 PM | #10 (permalink) | |
The370Z.com Sponsor
Join Date: Jun 2009
Location: Loganville, GA
Posts: 5,944
Drives: 370z
Rep Power: 2186 |
Quote:
It would do it to me after two sessions on fresh rotors. Sharif said its because I was street braking and not going 100% every time, but I'm not sure about that. I do know I don't have the problem now that I have stoptechs.
__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968 |
|
07-17-2011, 09:27 PM | #11 (permalink) |
A True Z Fanatic
Join Date: Feb 2010
Location: Covington, GA
Age: 46
Posts: 14,844
Drives: Waiting on next Z
Rep Power: 221 |
^ After this weekend your not going to have Stoptechs. I am. You said mod swap, right?
Also, are you going to run at Road Atlanta at the end of this month?
__________________
|
07-17-2011, 10:58 PM | #12 (permalink) | |
A True Z Fanatic
Join Date: Feb 2009
Location: FL
Posts: 4,776
Drives: Baby Shark
Rep Power: 701615 |
Quote:
|
|
07-17-2011, 11:06 PM | #13 (permalink) | |
A True Z Fanatic
Join Date: Jun 2009
Location: californee way
Posts: 5,380
Drives: 370, Leaf
Rep Power: 30 |
Quote:
Just cryo treat a set of rotors and that's probably the best you can do. Cryotreating is $100 for each pair and a set of air ducts are around $500. |
|
07-18-2011, 12:36 AM | #14 (permalink) |
Track Member
Join Date: Jan 2009
Location: Snoqualmie WA
Posts: 973
Drives: 03 996TT Porsche
Rep Power: 606 |
I hope so, although when putting my DD wheels back on I noticed the pads where rubbing only in one spot and the lines or wear marks on the rotors were fairly uniform………………I'll drive it and see if it cleans up. In the mean time though I'll work the cooling duct idea.
Thanks
__________________
Buddy Revell: "One man's sooner is another man's later" |
07-18-2011, 08:18 AM | #15 (permalink) | |
The370Z.com Sponsor
Join Date: Jun 2009
Location: Loganville, GA
Posts: 5,944
Drives: 370z
Rep Power: 2186 |
Quote:
No Road Atlanta this month. I've spent too much on track days this summer. Doing Zcon wednesday Roebling Road the weekend of 20 August VIR Sept 9-11 Road Atlanta November and thats about it for now. Probably one event in October too.
__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968 |
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stillen J-Hook Rotors with Metal Matrix Pad fitment | Nikon FM | Brakes & Suspension | 6 | 01-27-2011 01:49 PM |
Feeler: Stock Sport BBK + Stillen J-Hook Rotors + SS Lines + Stillen Street Pads | RCZ | Parts for sale (Private Classifieds) | 17 | 12-18-2010 02:57 PM |
which rotors to upgrade, J hook or slotted? | MD-370z | Brakes & Suspension | 22 | 11-28-2010 10:37 PM |
WTB: Stillen J-Hook Rotors | M.Bonanni | Wanted | 1 | 10-05-2010 06:52 PM |
Stillen J Hook Rotors | 370Ztune | Suspension/Brakes | 3 | 08-25-2010 07:23 PM |