Got my BC coilovers.

M.Bonanni · 05-02-2011, 07:37 PM

Quote:

Originally Posted by sktvietdragon

how do you adjust the rear damper when everything is installed?

The BCs come with an extender that you can install by drilling a small hole into the rear trunk plastic above the shock tower. Or you can drill a large enough hole in there to get your fingers through. Or you can remove that entire plastic piece anytime you want to change it. Either way involves removing or drilling into your interior plastics. The only time I really fiddle with mine is at the track so when I remove the spare tire/tools I also remove those plastic pieces for easy access. The whole removal/re-install including spare tire takes about 5 minutes. The same will apply to every coilover that has their adjustment at the top of the strut, which is pretty much every coilover.

Quote:

Originally Posted by RedBullRR

What's the best height setting? I just installed these and I am having some rubbing issues in the front and some clanking noise in the rear.

Technically speaking from a performance standpoint I wouldn't go any lower than 1" from stock. Further than that and you start screwing with suspension geometry and you're more vulnerable to weird creaks and noises from the suspension as the suspension geometry gets worse. Also make sure your springs are pre-loaded properly and check to make sure all of the adjustment collars (gold things) are tight as well as the nut on the top of the strut that holds the top hat on. This can be accessed through the trunk under the plastics without removing the coilover, but you will have to remove the adjustment knob in order to get a socket on there.

import111 · 05-02-2011, 09:12 PM

Quote:

Originally Posted by RedBullRR

What's the best height setting? I just installed these and I am having some rubbing issues in the front and some clanking noise in the rear.

Not sure exactly what height I am at. I think about 1.5 inches lower than stock. Not much wheel well gap at all.

import111 · 05-02-2011, 09:15 PM

Quote:

Originally Posted by sktvietdragon

how do you adjust the rear damper when everything is installed?

I never re-installed the interior panels that cover the rear, so mine are free to adjust when I like.

RedBullRR · 05-03-2011, 09:20 AM

Quote:

Originally Posted by import111

Not sure exactly what height I am at. I think about 1.5 inches lower than stock. Not much wheel well gap at all.

It would mean a lot and a great deal of help if you could take some pictures for me. Pictures of the rear spring bucket, and a pic of the drop itself.

I'd like to go 1.25 to 1.5 in the front and 1 or 1.25 in the rear. Currently have the dampening set to 25 from soft front and 15 from soft rear. My car is FKN Slammed. LOL

RedBullRR · 05-04-2011, 12:44 PM

bump

import111 · 05-04-2011, 09:26 PM

nismodreamr · 05-20-2011, 06:25 PM

good info guys, this thread has me about to buy a set of these from nick and adam over at TH.

M.Bonanni · 05-23-2011, 11:07 AM

Just wrote a review of these on my website...

Mike Bonanni Motorsports | Official Driver Website for Mike Bonanni

Monster370z · 10-13-2011, 05:21 AM

Does your car have spacers?

pcola370 · 06-01-2013, 11:06 AM

just got mine in the mail! cant wait to install them!!

05-04-2011, 12:44 PM	#20 (permalink)
RedBullRR Enthusiast Member Join Date: Oct 2010 Location: Suffolk Posts: 336 Drives: 2010 370Z Red Rep Power: 15	bump __________________ 2010 Solid Red Z: Mods: Stillen G3 Intakes \| BC Coilovers \| H&R 20/25 Spacers \| Stillen Splitter \| Stillen LW Pullie TBI \| Red GTR Start \| LED Interior \| Kenwood Double Din

05-23-2011, 11:07 AM	#23 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1321	Just wrote a review of these on my website... Mike Bonanni Motorsports \| Official Driver Website for Mike Bonanni __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
KW Variant 3 Coilovers \| 370Z Exclusive	THMotorsports	THMotorsports	1786	08-21-2019 01:58 PM
Will G37 Coilovers Fit the 370Z? Maybe not.	M.Bonanni	Brakes & Suspension	22	08-15-2014 02:30 PM
HKS Hipermax III Coilovers NOW AVAILABLE 370Z	THMotorsports	THMotorsports	108	11-05-2009 01:53 PM
What Coilovers are up and coming?	THMotorsports	Suspension/Brakes	20	02-13-2009 10:38 AM

05-04-2011, 09:26 PM	#21 (permalink)
import111 Track Member Join Date: Feb 2009 Location: Tucson, AZ. Posts: 622 Drives: 09 Nissan 370Z Rep Power: 191

05-20-2011, 06:25 PM	#22 (permalink)
nismodreamr Enthusiast Member Join Date: Apr 2011 Location: Des Moines Posts: 367 Drives: 11 Z34 MagB 6MT Rep Power: 14	good info guys, this thread has me about to buy a set of these from nick and adam over at TH.

10-13-2011, 05:21 AM	#24 (permalink)
Monster370z Base Member Join Date: Oct 2011 Location: Hollywood Posts: 9 Drives: 2011 370z SP 6MT Rep Power: 14	Does your car have spacers?

06-01-2013, 11:06 AM	#25 (permalink)
pcola370 Base Member Join Date: Apr 2013 Location: Pensacola, FL Posts: 82 Drives: 13 370Z GG M6 Rep Power: 12	just got mine in the mail! cant wait to install them!!