Eibach Springs & Spacers - Review+Pics

Phimosis · 05-24-2009, 05:09 PM

Quote:

Originally Posted by alan93rsa

Musashi,

The negative camber will accelerate the wear, that is a given. As to how much on the Bridgestones I don't have the answer. My guess is that if I leave it there the rears won't see 10k.

I'd like to get the rear closer to -1.8/-2

My car was at -2.2 (stock) on the rears at 1000 miles when I lowered it. That is within factory spec. It's at -2.5 now and will be leaving it there. it handles better!

BerkTech · 05-26-2009, 03:33 PM

awesome pics! looks really good with the spacers

Sonic370Z · 06-01-2009, 03:19 PM

looks great. I ran a similar setup on my 06 G35 coupe... Eibach springs with spacers 15(F)/20(R) combo. I really like that look on the 370Z, fills that beautiful rear fender flare.

Phimosis · 06-03-2009, 06:24 PM

Anyone know if 15mm spacers will fit with 305 width tires on the stock 19x10 wheel? If so, how much rubbing?

Minicobra1 · 06-05-2009, 04:02 AM

Quote:

Originally Posted by Phimosis

Anyone know if 15mm spacers will fit with 305 width tires on the stock 19x10 wheel? If so, how much rubbing?

Should be fine

There are others on here that are running 305's on a 10.5 rim with +22 offset. This effectively moves the edge of the rim out 14mm more then stock. So a 15mm spacer would be almost the same.

corbin09 · 06-08-2009, 02:36 PM

So based off of Phimosis' findings we should be fine dropping it with just springs? I want to do springs and sways, but i dont want to eat tires like crazy.

Viera · 06-13-2009, 01:20 AM

Any real differences between Ichiba's wheel spacers version I & II?

Phimosis · 06-13-2009, 03:21 PM

Quote:

Originally Posted by Viera

Any real differences between Ichiba's wheel spacers version I & II?

Ichiba says the strength/durability/precision is the same between type I and type II. It's easier mounting for type II since you leave stock studs in place, but minicobra says you cant use type II up front and type II is a little heavier than type I.

Mike · 06-14-2009, 02:16 PM

Do you think a 20mm spacer would work?

Minicobra1 · 06-15-2009, 10:48 AM

Quote:

Originally Posted by Mike

Do you think a 20mm spacer would work?

Yes, I installed 20mm spacers (Rear) on Saturday

there is a very subtle difference from the 15mm, I tooks some pics but you cant really notice it in the photos. (I didn't post them, b/c you won't see the diff, before and after) You could probably go 25mm if your car was dropped and you didn't adjust out the negative camber.

batman_4 · 06-15-2009, 12:13 PM

Quote:

Originally Posted by Minicobra1

Yes, I installed 20mm spacers (Rear) on Saturday

there is a very subtle difference from the 15mm, I tooks some pics but you cant really notice it in the photos. (I didn't post them, b/c you won't see the diff, before and after) You could probably go 25mm if your car was dropped and you didn't adjust out the negative camber.

good to know as i was planning on going 20mm rear. wouldn't 25mm be stretching it though....i've always be cautious about spacers for some reason.

DJcuetip · 06-16-2009, 06:24 AM

are the 20mm on yet?

MursePaolo · 06-18-2009, 03:06 AM

i've been reading around and it seems not a lot of people are changing their shocks. is this not an issue with the Z when lowering?

Bster · 06-18-2009, 04:26 AM

Quote:

Originally Posted by MursePaolo

i've been reading around and it seems not a lot of people are changing their shocks. is this not an issue with the Z when lowering?

I believe that it's just too early to tell.

DuNw/4BanGerZ · 06-18-2009, 11:04 AM

i got the 20mm spacers. and going with a camber kit to get that **** flush

05-26-2009, 03:33 PM	#62 (permalink)
BerkTech The370Z.com Sponsor Join Date: Jan 2009 Location: Irvine CA Posts: 279 Drives: Lots.... Rep Power: 272	awesome pics! looks really good with the spacers __________________ While the others type fast... Berk Technology goes fast.... See you at the track! OUR NEW PHONE NUMBER: (714) 546-BERK READ THE BERK BLOG HERE

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eibach Springs - In Stock & Shipping!	Josh@STILLEN	Brakes & Suspension	23	05-09-2009 05:19 PM
Update pics of Eibach lowering springs	DJcuetip	Brakes & Suspension	38	04-25-2009 12:59 AM
Intro Pricing - STILLEN Sway Bars & Eibach Springs!	Josh@STILLEN	Brakes & Suspension	12	04-14-2009 08:29 PM

06-01-2009, 03:19 PM	#63 (permalink)
Sonic370Z Base Member Join Date: Jun 2009 Location: Lexington, KY Posts: 91 Drives: 09 370Z Tour Sprt M6 Rep Power: 16	looks great. I ran a similar setup on my 06 G35 coupe... Eibach springs with spacers 15(F)/20(R) combo. I really like that look on the 370Z, fills that beautiful rear fender flare.

06-03-2009, 06:24 PM	#64 (permalink)
Phimosis Enthusiast Member Join Date: May 2009 Location: Oildale, CA Posts: 412 Drives: 2013 911 4S Rep Power: 416	Anyone know if 15mm spacers will fit with 305 width tires on the stock 19x10 wheel? If so, how much rubbing?

06-08-2009, 02:36 PM	#66 (permalink)
corbin09 Track Member Join Date: Jun 2009 Location: Dallas tx Posts: 665 Drives: 370z Rep Power: 280	So based off of Phimosis' findings we should be fine dropping it with just springs? I want to do springs and sways, but i dont want to eat tires like crazy.

06-13-2009, 01:20 AM	#67 (permalink)
Viera Track Member Join Date: Feb 2009 Location: Atlanta, GA Posts: 897 Drives: '09 M.Blue 370Z 6MT Rep Power: 264	Any real differences between Ichiba's wheel spacers version I & II?

06-14-2009, 02:16 PM	#69 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	Do you think a 20mm spacer would work?

06-16-2009, 06:24 AM	#72 (permalink)
DJcuetip Track Member Join Date: Dec 2008 Location: CA Posts: 704 Drives: 370 Rep Power: 260	are the 20mm on yet?

06-18-2009, 03:06 AM	#73 (permalink)
MursePaolo Base Member Join Date: Jun 2009 Location: Glendale, CA Posts: 34 Drives: 98 Integra GS-R Rep Power: 16	i've been reading around and it seems not a lot of people are changing their shocks. is this not an issue with the Z when lowering?

06-18-2009, 11:04 AM	#75 (permalink)
DuNw/4BanGerZ Base Member Join Date: Apr 2009 Location: Virginia Beach Age: 41 Posts: 92 Drives: 2009 370Z MB M6 w/sp Rep Power: 16	i got the 20mm spacers. and going with a camber kit to get that **** flush