Eibach Springs & Spacers - Review+Pics

batman_4 · 04-13-2009, 10:13 PM

Quote:

Originally Posted by Minicobra1

I'll post another one up tonight

thanks, stance looks great. i now now what im going to do real soon

kevr6 · 04-13-2009, 10:56 PM

Looks good!!

alan93rsa · 04-13-2009, 11:09 PM

I think you will find that the camber and toe have changed.

Car looks great. I am hoping to get mine on along with the Hotchkis bars before Mid-Ohio this weekend.

Minicobra1 · 04-13-2009, 11:17 PM

Quote:

Originally Posted by alan93rsa

I think you will find that the camber and toe have changed.

Car looks great. I am hoping to get mine on along with the Hotchkis bars before Mid-Ohio this weekend.

Maybe slightly in the rear, but the car feels exactly the same as far as steering input. I was going to do the Hotchkis bars when putting the springs in, but I was concerned they would be a little too stiff for Cali freeways. Let me know what you think of them, I may just put them on next

GP370Z_Funk · 04-14-2009, 01:39 AM

The car looks great, ordered my springs today. Already saw the 15mm spacers on the rear, perfect offset, makes the wheels look real flush with the body, probably going to order mine sometime this week. Saw another car with only 10mm spacers, just wasn't enough. I was wondering how hard it was to get the old studs out and put the new ones in, and how far did the nuts go on to the studs (roughly how many threads), just curious? That's the only reason I haven't ordered them yet. Any input would be appreciated.

Once again, car looks great, can't wait for my to look like that.

tru_Asiatik · 04-14-2009, 01:47 AM

nice braden looks like amplified did a good job
cant wait to get mine soon

so no problems with scraping on 1 way driveways yet? even at an angle?

sensi09 · 04-14-2009, 03:42 AM

Even with a subtle drop, I'd definitely get an alignment. You don't want to be surprised with uneven tire wear.

DJcuetip · 04-14-2009, 04:56 AM

nice!! yeah these springs are good!.. and sways coming soon =D

Minicobra1 · 04-14-2009, 05:17 AM

Quote:

Originally Posted by GP370Z_Funk

The car looks great, ordered my springs today. Already saw the 15mm spacers on the rear, perfect offset, makes the wheels look real flush with the body, probably going to order mine sometime this week. Saw another car with only 10mm spacers, just wasn't enough. I was wondering how hard it was to get the old studs out and put the new ones in, and how far did the nuts go on to the studs (roughly how many threads), just curious? That's the only reason I haven't ordered them yet. Any input would be appreciated.

Once again, car looks great, can't wait for my to look like that.

The studs came out pretty easy, but needed to unmount the e-brake assembly in order to slide them out and the new ones in. The fronts will not have that problem. There is an e-brake assembly behind the rotor on both sides. It's not that difficult. When the wheel is mounted up it is about the same number of turns on the threads with the longer studs as when it was stock.

Minicobra1 · 04-14-2009, 05:20 AM

Quote:

Originally Posted by DJcuetip

nice!! yeah these springs are good!.. and sways coming soon =D

Is Eibach coming out with sways, or are you going with something else??

Minicobra1 · 04-14-2009, 05:28 AM

Quote:

Originally Posted by tru_Asiatik

nice braden looks like amplified did a good job
cant wait to get mine soon

so no problems with scraping on 1 way driveways yet? even at an angle?

Not really a problem thus far, there were a couple that I wasn't being that cautious on, and I heard some very light scuffing, really minor, nothing more then before.

The wheel wind deflectors are 2.75 inch from the ground up, and the chin deflector has 4.25 inches of clearance. The wheel deflectors are pretty flexible, they should be ok on everything but the most severe driveways. They can always be taken off if it becomes a problem.

LOU@AMPLIFIED · 04-14-2009, 07:12 AM

Thank you B for the Rep points

I already ordered your new toys. I should have them by this week hopefully. If they do, will you be coming in for Sat?

Also, you want 15mm for the front right?

For those who wants the eibach springs, hotchkis sways PM me

Combo deal going on shipped or installed

tru_Asiatik · 04-14-2009, 08:58 AM

Quote:

Originally Posted by Minicobra1

Not really a problem thus far, there were a couple that I wasn't being that cautious on, and I heard some very light scuffing, really minor, nothing more then before.

The wheel wind deflectors are 2.75 inch from the ground up, and the chin deflector has 4.25 inches of clearance. The wheel deflectors are pretty flexible, they should be ok on everything but the most severe driveways. They can always be taken off if it becomes a problem.

im actually more worried about the front chin spoiler get scraped when backing out my drive way i have about and inch and a half clearance or so

RCZ · 04-14-2009, 01:18 PM

Looks great man!

GP370Z_Funk · 04-14-2009, 01:21 PM

I appreciate the info, ordering my spacers today.

04-13-2009, 10:56 PM	#17 (permalink)
kevr6 A True Z Fanatic Join Date: Feb 2009 Location: N.W. Atlanta Posts: 1,515 Drives: '09 Graphite 370Z 6M Rep Power: 666	Looks good!! __________________ *Beware...* Daily Sliding In My ZLED!

04-13-2009, 11:09 PM	#18 (permalink)
alan93rsa Enthusiast Member Join Date: Feb 2009 Location: Ohio Posts: 412 Drives: 16 Cayman GT4 Red Rep Power: 220	I think you will find that the camber and toe have changed. Car looks great. I am hoping to get mine on along with the Hotchkis bars before Mid-Ohio this weekend. __________________ 16 Cayman GT4, Carmine Red, Buckets, PCCB etc.

04-14-2009, 01:47 AM	#21 (permalink)
tru_Asiatik Track Member Join Date: Feb 2009 Location: so cal Posts: 793 Drives: 2009 370Z 6MT Rep Power: 270	nice braden looks like amplified did a good job cant wait to get mine soon so no problems with scraping on 1 way driveways yet? even at an angle? __________________ Stillen G3 CAIStillen CBEBerk's HFCEibach ProkitHotchkis Swaysichiba 15/20mm spacers? Oil coolerStillen PulleyStillen Headers

04-14-2009, 01:21 PM	#30 (permalink)
GP370Z_Funk Base Member Join Date: Feb 2009 Location: Seattle, WA Posts: 14 Drives: 09-370Z-PG-7A/T Rep Power: 16	Thanks minicobra I appreciate the info, ordering my spacers today.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eibach Springs - In Stock & Shipping!	Josh@STILLEN	Brakes & Suspension	23	05-09-2009 05:19 PM
Update pics of Eibach lowering springs	DJcuetip	Brakes & Suspension	38	04-25-2009 12:59 AM
Intro Pricing - STILLEN Sway Bars & Eibach Springs!	Josh@STILLEN	Brakes & Suspension	12	04-14-2009 08:29 PM

04-14-2009, 01:39 AM	#20 (permalink)
GP370Z_Funk Base Member Join Date: Feb 2009 Location: Seattle, WA Posts: 14 Drives: 09-370Z-PG-7A/T Rep Power: 16	The car looks great, ordered my springs today. Already saw the 15mm spacers on the rear, perfect offset, makes the wheels look real flush with the body, probably going to order mine sometime this week. Saw another car with only 10mm spacers, just wasn't enough. I was wondering how hard it was to get the old studs out and put the new ones in, and how far did the nuts go on to the studs (roughly how many threads), just curious? That's the only reason I haven't ordered them yet. Any input would be appreciated. Once again, car looks great, can't wait for my to look like that.

04-14-2009, 03:42 AM	#22 (permalink)
sensi09 Enthusiast Member Join Date: Dec 2008 Location: so cal Posts: 449 Drives: _ Rep Power: 17	Even with a subtle drop, I'd definitely get an alignment. You don't want to be surprised with uneven tire wear.

04-14-2009, 04:56 AM	#23 (permalink)
DJcuetip Track Member Join Date: Dec 2008 Location: CA Posts: 704 Drives: 370 Rep Power: 260	nice!! yeah these springs are good!.. and sways coming soon =D

04-14-2009, 07:12 AM	#27 (permalink)
LOU@AMPLIFIED Vendorship temporary revoked due to payment issue Join Date: Nov 2008 Location: so cal Posts: 982 Drives: 08 g37/09 370z Rep Power: 0	Thank you B for the Rep points I already ordered your new toys. I should have them by this week hopefully. If they do, will you be coming in for Sat? Also, you want 15mm for the front right? For those who wants the eibach springs, hotchkis sways PM me Combo deal going on shipped or installed

04-14-2009, 01:18 PM	#29 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Looks great man!