camber arms help

Flushnismo · 04-15-2011, 12:50 PM

Quote:

Originally Posted by abgyak

Im getting mine soon! SPC as well... but im not sure if i need to get the fronts.... lowering my Z with swift springs dropping 1.2" Front and 1 inch rear.. with wheels as follows:

20x9.5 et+6 (with 5mm spacer)
20x11 et-1

Do you guys think i need the front camber or shud i settle with the rears only?

You might need fronts...because if there isn't enough induced camber from lowering it you will rub like crazy

Flushnismo · 04-15-2011, 12:53 PM

Quote:

Originally Posted by sig11

Weird... mine was slammed and they were able to keep toe in spec.

Mine was slammed too and perfectly in spec with toe, but camber was really bad, once i got those camber arms and started turning them the toe was pushed in dramatically.

looked pigeon toed

simota1 · 04-15-2011, 02:57 PM

Quote:

Originally Posted by abgyak

The Red on the Ichiba also caught my eyes initially.. LoL!!

red is always great man...... i love red LOL

btw your wheels have super aggressive offsets!!!!

gonna be flush in the front with out that spacers.... i have a +16 in the front and my front is slammed and its still flush

+6 is gonna be crazy flush... the rears are just perfect!!!!! with +1

simota1 · 04-15-2011, 03:02 PM

Quote:

Originally Posted by Flushnismo

SPC Rear Camber & Toe Bolt Kit 2009-2010 Nissan 370Z / 2007 + Infiniti G35

wow man!!! thats an awesome price.... are they reliable though? i mean the company btw.... not the brand of the camber arm lol and also these are for a pair right? because for some reason i keep seeing these things for sale as 1 set per wheel which is retarded because OBVIOUSLY youll need two lol

do they ship worldwide also?

fuct · 04-15-2011, 04:10 PM

im sticking with SPL, but to each his own.

Flushnismo · 04-15-2011, 05:49 PM

Okay here's my two cents.. It's not going to matter what brand you get, they will all accomplish the same thing. You'll probably adjust it one time then never touch or see the part again.

simota1 · 04-15-2011, 06:19 PM

Quote:

Originally Posted by fuct

im sticking with SPL, but to each his own.

man those things are super pricey lol

i agree with flush lol... im gonna agjust it once and probably never gonna mess with it again

shoopajae10 · 04-15-2011, 10:31 PM

Flushnimso, what are your specs for front/rear camber/toe/caster?

I just installed spc rear cambers too but without the toe bolt because i didn't have the equipment to extend the hole with a grinder. if i have too much negative camber on the rear right now, do i need to install the toe bolts to get it closer to -1/0 camber?

I was thinking the toe bolts would not matter and have nothing to do with the camber since it adjusts the toes only. Right now im maxxed out on the rear with kw v3s with 25mm spacers too. my toe is in spec with factory toe bolts.

Flushnismo · 04-16-2011, 01:46 AM

Quote:

Originally Posted by shoopajae10

Flushnimso, what are your specs for front/rear camber/toe/caster?

I just installed spc rear cambers too but without the toe bolt because i didn't have the equipment to extend the hole with a grinder. if i have too much negative camber on the rear right now, do i need to install the toe bolts to get it closer to -1/0 camber?

I was thinking the toe bolts would not matter and have nothing to do with the camber since it adjusts the toes only. Right now im maxxed out on the rear with kw v3s with 25mm spacers too. my toe is in spec with factory toe bolts.

Toe bolts adjust toe only, but the camber arms move both... You should be able to get the camber pretty close to -1, but toe bolts wont affect the camber

shoopajae10 · 04-16-2011, 10:53 AM

Quote:

Originally Posted by Flushnismo

Toe bolts adjust toe only, but the camber arms move both... You should be able to get the camber pretty close to -1, but toe bolts wont affect the camber

kool, if you dont mind me askin, what are your specs for toe/camber/caster??

Flushnismo · 04-16-2011, 11:06 AM

Quote:

Originally Posted by shoopajae10

kool, if you dont mind me askin, what are your specs for toe/camber/caster??

I don't know my caster, but camber is -1.4 and toe is .5

SPOHN · 04-16-2011, 05:30 PM

Even though I have the SPC kit and they have always held up great. I've always wondered about them slipping under hard cornering. But you would probably have to be pushing it pretty hard. They just have to be made sure there torqued correctly.

I would have choosen SPL if they didn't wait years to release a front camber kit.

shoopajae10 · 04-17-2011, 01:10 AM

Quote:

Originally Posted by SPOHN

Even though I have the SPC kit and they have always held up great. I've always wondered about them slipping under hard cornering. But you would probably have to be pushing it pretty hard. They just have to be made sure there torqued correctly.

I would have choosen SPL if they didn't wait years to release a front camber kit.

That is whats stuck in my head every time i make a hard turn too.

Once SPL comes out with the front adjustable arms I will switch.

I personally like the SPC rear camber adjustment better than SPLs though.

Looks like im going to have to install the toe bolts, COBB aligned it for me today but couldnt get the rears closer to -2!! the best they could do was -3 or there would of been crazy toe causing more tire wear.

Flushnismo · 04-17-2011, 01:44 AM

See...you NEED toe bolts to get the camber straight

Quote:

Originally Posted by shoopajae10

That is whats stuck in my head every time i make a hard turn too.

Once SPL comes out with the front adjustable arms I will switch.

I personally like the SPC rear camber adjustment better than SPLs though.

Looks like im going to have to install the toe bolts, COBB aligned it for me today but couldnt get the rears closer to -2!! the best they could do was -3 or there would of been crazy toe causing more tire wear.

Jessobear · 04-17-2011, 11:03 AM

FYI, SPC part number 72260 includes the toe bolt. It is impossible to buy just the camber arm alone. You use the adjustable arm and you reuse the stock adjuster for camber and you use the supplied adjuster for toe.

SPC part number 72265 is just two of the bolts, which is why you don't get as much range out of the camber adjustment.

My car is lowered an inch and both the rear camber and toe are way out of whack.

04-15-2011, 05:49 PM	#21 (permalink)
Flushnismo A True Z Fanatic Join Date: Dec 2010 Location: Amarillo, TX Posts: 1,041 Drives: 2010 Boosted 40th Rep Power: 16	Okay here's my two cents.. It's not going to matter what brand you get, they will all accomplish the same thing. You'll probably adjust it one time then never touch or see the part again. __________________ AeroJacket l BC Racing l B&M l K&N l EVO-R l TWM Performance l Tanabe l AAM l Drop Engineering l Zenclosure

04-15-2011, 10:31 PM	#23 (permalink)
shoopajae10 Track Member Join Date: Oct 2009 Location: Over Yonder Posts: 650 Drives: A White Sports Car Rep Power: 17	Flushnimso, what are your specs for front/rear camber/toe/caster? I just installed spc rear cambers too but without the toe bolt because i didn't have the equipment to extend the hole with a grinder. if i have too much negative camber on the rear right now, do i need to install the toe bolts to get it closer to -1/0 camber? I was thinking the toe bolts would not matter and have nothing to do with the camber since it adjusts the toes only. Right now im maxxed out on the rear with kw v3s with 25mm spacers too. my toe is in spec with factory toe bolts. Last edited by shoopajae10; 04-15-2011 at 10:36 PM.

04-16-2011, 05:30 PM	#27 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Even though I have the SPC kit and they have always held up great. I've always wondered about them slipping under hard cornering. But you would probably have to be pushing it pretty hard. They just have to be made sure there torqued correctly. I would have choosen SPL if they didn't wait years to release a front camber kit. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: SPC Rear Camber Arms	370zFORme!!	Parts for sale (Private Classifieds)	39	03-02-2011 03:38 PM
Rear Camber Arms	christian370z	Wanted	13	11-06-2010 07:48 PM
SPC and SPC Camber arms	Zeto	Forged Performance	5	11-01-2010 11:22 AM
WTB: SPL Rear Camber arms	Zeto	Parts for sale (Private Classifieds)	0	10-25-2010 01:43 PM
creaking camber arms!?	import111	Brakes & Suspension	5	03-31-2010 04:33 PM

04-15-2011, 04:10 PM	#20 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	im sticking with SPL, but to each his own.

04-17-2011, 11:03 AM	#30 (permalink)
Jessobear Base Member Join Date: Oct 2010 Location: Washington, DC Posts: 201 Drives: '10 370Z Tour/Sp M6 Rep Power: 15	FYI, SPC part number 72260 includes the toe bolt. It is impossible to buy just the camber arm alone. You use the adjustable arm and you reuse the stock adjuster for camber and you use the supplied adjuster for toe. SPC part number 72265 is just two of the bolts, which is why you don't get as much range out of the camber adjustment. My car is lowered an inch and both the rear camber and toe are way out of whack.