Nissan 370Z Forum  

Any springs that won't eat tires?

Originally Posted by brado when you lower the car it gives you negative camber right? so does that mean that the insides of ur tires will wear faster? Not always,

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Brakes & Suspension


Reply
 
LinkBack Thread Tools Display Modes
Old 04-14-2011, 07:50 PM   #16 (permalink)
A True Z Fanatic
 
azn370z's Avatar
 
Join Date: Nov 2008
Location: Seattle
Posts: 1,722
Drives: z34 - R1
Rep Power: 490
azn370z has a reputation beyond reputeazn370z has a reputation beyond reputeazn370z has a reputation beyond reputeazn370z has a reputation beyond reputeazn370z has a reputation beyond reputeazn370z has a reputation beyond reputeazn370z has a reputation beyond reputeazn370z has a reputation beyond reputeazn370z has a reputation beyond reputeazn370z has a reputation beyond reputeazn370z has a reputation beyond repute
Default

Quote:
Originally Posted by brado View Post
when you lower the car it gives you negative camber right? so does that mean that the insides of ur tires will wear faster?
Not always, depends on who aligns your z. I've noticed with my tires the inside and outside wear evenly. I'm at about 12k.
__________________
2010 k23
H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts
azn370z is offline   Reply With Quote
Old 04-14-2011, 08:08 PM   #17 (permalink)
Ron
A True Z Fanatic
 
Ron's Avatar
 
Join Date: Oct 2010
Location: Houston, TX
Posts: 3,009
Drives: TT '11 PW Nismo #113
Rep Power: 22
Ron has much to be proud ofRon has much to be proud ofRon has much to be proud ofRon has much to be proud ofRon has much to be proud ofRon has much to be proud ofRon has much to be proud ofRon has much to be proud of
Default

Quote:
Originally Posted by christian370z View Post
One piece of advice: don't listen to your friend because he doesn't know what he is talking about. You will not eat your tires after lowering the car and having an alignment done as the camber will be within factory spec and therefore will not have a significant impact on tire life.
Depending on the drop he might not be able to get the car back to spec.


Quote:
Originally Posted by Red__Zed View Post
The Eibachs and the swift both have a mild enough drop you shouldn't need a camber kit. I think with H and R's you may need to get one, but even with them, it's not like you'll be running hellaflush levels of camber.
I have the swifts and I can tell you that you will need camber arms to get measurements back to spec. Can't speak for eibachs though.



OP if you are interested, I have a set of Nismo springs for sale that will drop you .4'' You should be able to get the car back to spec with those and thus not eating tires. PM me if you're interested.

Edit: Here's the link Nismo Springs, 3.5k miles

Last edited by Ron; 04-14-2011 at 08:41 PM.
Ron is offline   Reply With Quote
Old 04-15-2011, 12:58 AM   #18 (permalink)
A True Z Fanatic
 
DIGItonium's Avatar
 
Join Date: Jan 2009
Location: Kansas
Posts: 3,800
Drives: 09 Z34-TT 6MT
Rep Power: 43
DIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond repute
Default

Ron, did you get camber arms for the front wheels? I think my front wheels still has a little bit of negative camber. It is currently -1.6 and -1.5 for the front left and right, and -2.6 and -2.5 for the rear left and right. It's probably slightly worse now after a couple of days.
__________________
http://www.the370z.com/image.php?type=sigpic&userid=950&dateline=13162988  42
DIGItonium is offline   Reply With Quote
Old 04-15-2011, 01:10 AM   #19 (permalink)
Ron
A True Z Fanatic
 
Ron's Avatar
 
Join Date: Oct 2010
Location: Houston, TX
Posts: 3,009
Drives: TT '11 PW Nismo #113
Rep Power: 22
Ron has much to be proud ofRon has much to be proud ofRon has much to be proud ofRon has much to be proud ofRon has much to be proud ofRon has much to be proud ofRon has much to be proud ofRon has much to be proud of
Default

Yep I got front and rear camber arms and adjusted them to the same length as stock when installing for the time being.

Rear camber is pretty noticeable now, fronts don't look that bad but I'm sure I'm out of spec. It's been a week since the install so I'm getting an alignment tomorrow. I'm sure your camber increased if you got the alignment done the same day of the install. It took my front 4 days of driving around to settle from 2in wheel gap to 0.75in

Hope that helps!

Last edited by Ron; 04-15-2011 at 01:14 AM.
Ron is offline   Reply With Quote
Old 04-15-2011, 06:13 PM   #20 (permalink)
Base Member
 
Join Date: Feb 2011
Location: Virginia
Posts: 216
Drives: 09 touring w/ sport
Rep Power: 14
brado is on a distinguished road
Default

Quote:
Originally Posted by azn370z View Post
Not always, depends on who aligns your z. I've noticed with my tires the inside and outside wear evenly. I'm at about 12k.
the reason i was asking was because i havnt lowered mine yet and since my tires in the front wear on the outside more, if i lower it shouldnt it make it wear more evenly without a camber kit (just in the front)?
brado is offline   Reply With Quote
Old 04-15-2011, 06:20 PM   #21 (permalink)
Enthusiast Member
 
Join Date: Apr 2011
Location: Brooklyn Park, MN
Posts: 424
Drives: 04 se-r spec v, 370z
Rep Power: 14
homeryansta will become famous soon enough
Default

how strong are the stock non-nismo 370z struts? how long can it withstand a 1-2 inch drop?
__________________
homeryansta is offline   Reply With Quote
Old 04-26-2011, 12:01 PM   #22 (permalink)
A True Z Fanatic
 
tjlazer's Avatar
 
Join Date: Dec 2009
Location: Tacoma
Age: 53
Posts: 2,496
Drives: Z34, R35
Rep Power: 20
tjlazer is just really nicetjlazer is just really nicetjlazer is just really nicetjlazer is just really nice
Send a message via ICQ to tjlazer Send a message via MSN to tjlazer Send a message via Yahoo to tjlazer
Default

Quote:
Originally Posted by Ron View Post
I have the swifts and I can tell you that you will need camber arms to get measurements back to spec. Can't speak for eibachs though.
Well you are the exception not the rule, as most of us with Swift Spec R's do NOT need camber kits. I was able to get mine to -1.4 front and -1.9 rears.

If you stay under an inch you should be fine. Tein H tech springs have the most mild drop, more so than Swift or Eibach. (about .5" drop I believe) but are harder to find.
__________________
2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV
tjlazer is offline   Reply With Quote
Old 04-26-2011, 12:33 PM   #23 (permalink)
The370Z.com Sponsor
 
Mike's Avatar
 
Join Date: Jun 2009
Location: Loganville, GA
Posts: 5,944
Drives: 370z
Rep Power: 2186
Mike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond repute
Default

Quote:
Originally Posted by brado View Post
the reason i was asking was because i havnt lowered mine yet and since my tires in the front wear on the outside more, if i lower it shouldnt it make it wear more evenly without a camber kit (just in the front)?
you need an alignment. alignments from the factory suck.
__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968
Mike is offline   Reply With Quote
Old 04-26-2011, 03:19 PM   #24 (permalink)
A True Z Fanatic
 
KamiSpeed's Avatar
 
Join Date: Feb 2011
Location: Orlando, FL
Posts: 5,888
Drives: 09 370z
Rep Power: 25
KamiSpeed is a splendid one to beholdKamiSpeed is a splendid one to beholdKamiSpeed is a splendid one to beholdKamiSpeed is a splendid one to beholdKamiSpeed is a splendid one to beholdKamiSpeed is a splendid one to behold
Send a message via AIM to KamiSpeed
Default

OP if youre on the lookout for springs let me know and I can get some for you, Swift are currently on back order, the Tein H tech are special order only and the eibach are good in stock, I'd say one of these 3 won't kill your tires, but definately do an alignment and if you're still unsatisfied buy a camber kit ( the Rear SPC kit is like 200-300 so its not horrible)
KamiSpeed is offline   Reply With Quote
Old 04-26-2011, 06:08 PM   #25 (permalink)
Base Member
 
Join Date: Feb 2011
Location: Virginia
Posts: 216
Drives: 09 touring w/ sport
Rep Power: 14
brado is on a distinguished road
Default

Quote:
Originally Posted by Mike View Post
you need an alignment. alignments from the factory suck.
damn i had no idea that factory allignments were bad haha. i thought it was just normal for the car. thanks though
brado is offline   Reply With Quote
Old 04-28-2011, 06:10 PM   #26 (permalink)
Base Member
 
Join Date: Oct 2010
Location: Washington, DC
Posts: 201
Drives: '10 370Z Tour/Sp M6
Rep Power: 15
Jessobear will become famous soon enough
Default

Toe eats tires, not camber. The toe is likely going to be what goes way out of spec when you lower the car. The SPC rear camber/toe kit is cheap. Just get that and have it installed when you do your springs. The fronts you'll most likely be OK.
Jessobear is offline   Reply With Quote
Old 04-28-2011, 06:58 PM   #27 (permalink)
A True Z Fanatic
 
chops's Avatar
 
Join Date: Oct 2010
Location: NA
Posts: 1,732
Drives: NA
Rep Power: 22
chops has a reputation beyond reputechops has a reputation beyond reputechops has a reputation beyond reputechops has a reputation beyond reputechops has a reputation beyond reputechops has a reputation beyond reputechops has a reputation beyond reputechops has a reputation beyond reputechops has a reputation beyond reputechops has a reputation beyond reputechops has a reputation beyond repute
Default

Quote:
Originally Posted by Jessobear View Post
Toe eats tires, not camber. The toe is likely going to be what goes way out of spec when you lower the car. The SPC rear camber/toe kit is cheap. Just get that and have it installed when you do your springs. The fronts you'll most likely be OK.
correct, however camber will wear the inside of your tires moreso than the outside, leading to lower treadlife. im "slammed" with no wheel gap with my coils and my front camber is -1.7 and rear is -2.5, but the toe (front/back) was able to be brought back to factory specs without any camber/toe kits. and by the way...my toe was horribly out of spec after my install!
chops is offline   Reply With Quote
Old 06-01-2011, 12:12 AM   #28 (permalink)
Base Member
 
czheng51's Avatar
 
Join Date: Sep 2010
Location: Los Angeles
Posts: 110
Drives: MITSUBISHI EVO X
Rep Power: 15
czheng51 is on a distinguished road
Default

I finally decided to go with the Swift Spec-R lowering springs and SPL rear camber arms and SPC Toe Bolt installed. Some guy from Precision Z told me that the SPC front camber are trash cuz the caster and camber is all together in the same joint so its almost impossible to get alignment back to spec. He said with the mild drop i can get my front pretty close to spec. i hope he's right? cuz im not trying to buy a set of front tires ever other month since my Z is my daily driving car.
czheng51 is offline   Reply With Quote
Old 06-01-2011, 04:08 PM   #29 (permalink)
A True Z Fanatic
 
fuct's Avatar
 
Join Date: May 2009
Location: Sugar Land
Posts: 3,692
Drives: 97' Ranger :)
Rep Power: 24
fuct has much to be proud offuct has much to be proud offuct has much to be proud offuct has much to be proud offuct has much to be proud offuct has much to be proud offuct has much to be proud offuct has much to be proud offuct has much to be proud offuct has much to be proud of
Default

Quote:
Originally Posted by chops View Post
correct, however camber will wear the inside of your tires moreso than the outside, leading to lower treadlife. im "slammed" with no wheel gap with my coils and my front camber is -1.7 and rear is -2.5, but the toe (front/back) was able to be brought back to factory specs without any camber/toe kits. and by the way...my toe was horribly out of spec after my install!
yea they can fix toe but it increases your camber. they fight themselves if you dont have a toe kit. that was my understanding during my cars alignmment. they can get camber back to factory but toe starts to go.

bottom line you need a rear camber AND toe kit if you have any signifigant amount of drop. (1"+)
fuct is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
winter tires or rims and tires 2lo Wheels & Tires 3 11-09-2010 06:12 PM
Eibach springs vs H&R springs xbigb4ller69z Brakes & Suspension 8 07-27-2010 09:02 AM
Looking for tires SIMILAR to GTR tires for my 370Z 19" Sport Footloose301 Wheels & Tires 7 07-04-2010 02:37 PM
FS or WTT: 19" OEM Rays with Tires! 5k on the wheels & Tires. Perfect Cond. tbonesteak Parts for sale (Private Classifieds) 24 02-27-2010 03:50 AM
FS: Nitto Neo Gen Tires 245/35/19 (2 Tires) Buddy Revell Parts for sale (Private Classifieds) 0 12-21-2009 03:08 PM


All times are GMT -5. The time now is 07:11 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2