i just got my swift spring installed on my nismo, went to get an alignment check, my front left was about -1 and right was -1.8. and the rear was
|
|
LinkBack | Thread Tools | Display Modes |
04-05-2011, 11:25 PM | #1 (permalink) |
Base Member
Join Date: Jun 2010
Location: Orange County, CA
Posts: 87
Drives: 10 Nismo PG
Rep Power: 15 |
Alignment Help!
i just got my swift spring installed on my nismo, went to get an alignment check, my front left was about -1 and right was -1.8. and the rear was about identical about -3. i was just planning to get a rear camber kit, now the guy says i need a front camber arm to adjust the front right wheel camber. i dont get why my right was almost 1 degree different than my left can someone explain? i was hoping not to get front camber arms, but if i need to i will. thx.
|
04-06-2011, 12:10 AM | #2 (permalink) |
A True Z Fanatic
|
Where'd did you get it done at?
__________________
Top Secret | EVO-R | Fujimura Auto | Shine Auto | Seibon | MRWorks | Swift | SPC | SSR | UpRev | Project Kics | NST | Titek | Eibach | Nismo | Whiteline | Quaife | Invidia | Fly1 | CF Element | Carbon Signal
|
04-06-2011, 01:07 AM | #6 (permalink) |
A True Z Fanatic
|
Mine was -2.2 rear and -1.75 front with the swifts. No variation in the fronts like yours.
__________________
Top Secret | EVO-R | Fujimura Auto | Shine Auto | Seibon | MRWorks | Swift | SPC | SSR | UpRev | Project Kics | NST | Titek | Eibach | Nismo | Whiteline | Quaife | Invidia | Fly1 | CF Element | Carbon Signal
|
04-06-2011, 01:45 AM | #9 (permalink) |
A True Z Fanatic
|
After alignment with no kit.
__________________
Top Secret | EVO-R | Fujimura Auto | Shine Auto | Seibon | MRWorks | Swift | SPC | SSR | UpRev | Project Kics | NST | Titek | Eibach | Nismo | Whiteline | Quaife | Invidia | Fly1 | CF Element | Carbon Signal
|
04-06-2011, 01:46 AM | #10 (permalink) |
A True Z Fanatic
|
Did you let the springs settle in before getting it aligned?
__________________
Top Secret | EVO-R | Fujimura Auto | Shine Auto | Seibon | MRWorks | Swift | SPC | SSR | UpRev | Project Kics | NST | Titek | Eibach | Nismo | Whiteline | Quaife | Invidia | Fly1 | CF Element | Carbon Signal
|
04-06-2011, 01:49 AM | #12 (permalink) |
A True Z Fanatic
|
Front is non adjustable from factory. Rear has some adjustability.
__________________
Top Secret | EVO-R | Fujimura Auto | Shine Auto | Seibon | MRWorks | Swift | SPC | SSR | UpRev | Project Kics | NST | Titek | Eibach | Nismo | Whiteline | Quaife | Invidia | Fly1 | CF Element | Carbon Signal
|
04-06-2011, 01:58 AM | #14 (permalink) |
A True Z Fanatic
|
Nah. West End only gave me the final numbers.
__________________
Top Secret | EVO-R | Fujimura Auto | Shine Auto | Seibon | MRWorks | Swift | SPC | SSR | UpRev | Project Kics | NST | Titek | Eibach | Nismo | Whiteline | Quaife | Invidia | Fly1 | CF Element | Carbon Signal
|
04-06-2011, 09:10 AM | #15 (permalink) |
A True Z Fanatic
Join Date: Aug 2010
Location: WNY
Posts: 4,117
Drives: 12 ZL1 6mt black
Rep Power: 43 |
I would recomend you order the kits then drive the car for about 20 miles then let it sit for a couple days. Take it back to get alignment and if it is out of specs have them install the parts and realign it. If it in't just send the parts back , you may have a restocking fee but you will still be on the plus side, just be sure to discuss returning with the company you order from.
__________________
2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Alignment | Jquad | Brakes & Suspension | 6 | 03-15-2011 01:32 AM |
Alignment question | 370Z JT | Brakes & Suspension | 4 | 02-16-2011 06:34 PM |
door out of alignment? | vortrex | Exterior & Interior | 6 | 01-02-2010 02:45 PM |
Alignment in San Diego | SilverBullet | The Lounge (Off Topic) | 4 | 12-29-2009 01:40 PM |
Eibach Pro Alignment Kit? | Dave384 | Brakes & Suspension | 4 | 07-10-2009 05:06 PM |