another will this setup work (i know i know)

stells370 · 04-05-2011, 11:12 AM

ok guys heres my problem id like to go with swift springs with 15mm spacers up front and 20mm in the rear BUT the previous owner of my car swapped out the stock rubber for some 275/30s up front and 305/30s in the rear! car has the 19" rays just wondering if anyone is running this setup and if they are rubbing any? thanks in advance!

Ron · 04-05-2011, 12:19 PM

I know 20mm with 305s on Nismo rear wheels will rub. Fronts are gonna be cutting it close too, it might rub unless you dial some neg camber. Don't take my word for it though, lets see what others have to say.

Boost_lee · 04-05-2011, 03:30 PM

Im doubting the 275s up front with a 15mm spacer will fit without rubbing.
The 305s in the rear may be cutting it close on a 20mm

No concrete evidence here though, just going based off of what my car looks like with 15F/20R specers, stock tire width, and swift springs.

kenchan · 04-05-2011, 04:12 PM

unless the ride completely sucks (tramlining and all) i would just drive them until they wear out and get the factory sizes before doing the spacers.

stells370 · 04-05-2011, 05:34 PM

i may just do that thanks for the help guys! anyone know if i will have rubbing issues without the spacers just lowered on swifts? thanks in advance

04-05-2011, 11:12 AM	#1 (permalink)
stells370 Enthusiast Member Join Date: Mar 2011 Location: Jennings, la Posts: 262 Drives: 09 370z pw Rep Power: 14	another will this setup work (i know i know) ok guys heres my problem id like to go with swift springs with 15mm spacers up front and 20mm in the rear BUT the previous owner of my car swapped out the stock rubber for some 275/30s up front and 305/30s in the rear! car has the 19" rays just wondering if anyone is running this setup and if they are rubbing any? thanks in advance!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aggressive Setup: will it work?	Stanced370Z	Wheels & Tires	55	03-01-2014 08:46 PM
Weds Wheels SA60M's l Work Wheel Free "RS" Lug Promotion l Work XC-8 Closeout!	DriveLineEric	Tires/Wheels	14	03-09-2011 05:31 PM
Free Work RS-Lug Nut Promotion w. Emotion Wheels & Work XC-8 Closeout Special!	DriveLineEric	Tires/Wheels	5	10-26-2010 04:29 PM
Will exhaust work require ECU work to avoid knock?	wstar	Intake/Exhaust	2	03-17-2009 08:34 PM

04-05-2011, 12:19 PM	#2 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 22	I know 20mm with 305s on Nismo rear wheels will rub. Fronts are gonna be cutting it close too, it might rub unless you dial some neg camber. Don't take my word for it though, lets see what others have to say.

04-05-2011, 03:30 PM	#3 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	Im doubting the 275s up front with a 15mm spacer will fit without rubbing. The 305s in the rear may be cutting it close on a 20mm No concrete evidence here though, just going based off of what my car looks like with 15F/20R specers, stock tire width, and swift springs.

04-05-2011, 04:12 PM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	unless the ride completely sucks (tramlining and all) i would just drive them until they wear out and get the factory sizes before doing the spacers.

04-05-2011, 05:34 PM	#5 (permalink)
stells370 Enthusiast Member Join Date: Mar 2011 Location: Jennings, la Posts: 262 Drives: 09 370z pw Rep Power: 14	i may just do that thanks for the help guys! anyone know if i will have rubbing issues without the spacers just lowered on swifts? thanks in advance