Finished TEIN Monoflex with EDFC install

Nikon FM · 04-04-2011, 03:39 PM

I put the coilovers in over my Christmas break and just now finished up the EDFC control (lots of delays etc....). Last week I got the car (with my track tires on) corner balanced and aligned for track/street driving. All I can say is.......... holy crap the car has been reborn. I highly recommend getting corner balanced and aligned after a coil over install. It is money well spent

theDreamer · 04-04-2011, 03:55 PM

Where did you install the EDFC?

Nikon FM · 04-05-2011, 12:42 AM

To the left of the steering wheel and right of the fob holder. The face is about 5" above the top of the fob holder. The three wires are barely visible running down and then behind/under the dash but at least my leg does not hit it. Before I ran the wires I had it mounted a bit lower and would bump my shin on it….didn't like that.

kkruel55 · 04-05-2011, 01:13 AM

I have the same setup to be installed this week. Looking at the wires, I am hoping to locate my box in the armrest hatch.

Osiris · 04-05-2011, 10:23 AM

Quote:

Originally Posted by Nikon FM

To the left of the steering wheel and right of the fob holder. The face is about 5" above the top of the fob holder. The three wires are barely visible running down and then behind/under the dash but at least my leg does not hit it. Before I ran the wires I had it mounted a bit lower and would bump my shin on it….didn't like that.

In for pics!

Nikon FM · 04-06-2011, 01:30 AM

Okay. I'll shoot a few in some good day light and post.

djpathfinder · 04-06-2011, 03:27 AM

Quote:

Originally Posted by Nikon FM

I put the coilovers in over my Christmas break and just now finished up the EDFC control (lots of delays etc....). Last week I got the car (with my track tires on) corner balanced and aligned for track/street driving. All I can say is.......... holy crap the car has been reborn. I highly recommend getting corner balanced and aligned after a coil over install. It is money well spent

about the corner balancing.

As for the EDFC...seems $$$ for something I could adjust myself when I swap tires before a track session....I don't know. Let us know how well it works for you. Definitely want to see pics.

What kind of alignment specs are you running? What rebound settings are you at currently?

Nikon FM · 04-06-2011, 07:39 PM

It's embarrassing that my setup was so off before the alignment and corner balance work was done. After installing the coilovers and lowering the car everything was pretty much out of whack, but after getting the work done the car feels great! My first track day is 4/21, so I'm definitely looking forward to the difference. Right now in the crazy rain soaked roads I'm running damping settings of 9 in the front and 6 in the back…... 0, 0 is zero damping. Come track day I'll have plenty of time to dial things in.

The Coilover install was done in early January so I did not run the bad setup on the track, thank goodness…...

Red__Zed · 04-06-2011, 07:43 PM

nice setup

fuct · 04-07-2011, 09:42 AM

Nikon do you have a front camber kit? curious because they adjusted it. also your camber is still not within factory spec. im not sure why its all green on the final adjustment print out.

Nikon FM · 04-07-2011, 11:15 PM

No front camber kit although I believe there is some front camber adjustability with the coilovers. Thanks for the tip on "why is it green". I asked for a Track/DD setup so perhaps the settings are the compromise, but to my knowledge green is supposed to be "in spec".

Whatever the settings the car sure handles well now.

kkruel55 · 04-17-2011, 08:34 PM

Imho, EDFC is very worth it. I can take my car from comfy for my girlfriend to stiff enough that I can have fun in the corners with it. And if I want to use the tires I'm running now at the track (Ventus V12s) then I can drive right on and switch on the fly... pretty neat.

theDreamer · 04-17-2011, 08:43 PM

Quote:

Originally Posted by kkruel55

Imho, EDFC is very worth it. I can take my car from comfy for my boyfriend to stiff enough that I can have fun in the corners with it. And if I want to use the tires I'm running now at the track (Ventus V12s) then I can drive right on and switch on the fly... pretty neat.

Fixed that for you.

kenchan · 04-17-2011, 09:40 PM

kkruel55 · 04-18-2011, 07:27 AM

Har har I bet I can turn faster than you

04-04-2011, 03:39 PM	#1 (permalink)
Nikon FM Track Member Join Date: Jan 2009 Location: Snoqualmie WA Posts: 973 Drives: 03 996TT Porsche Rep Power: 606	Finished TEIN Monoflex with EDFC install I put the coilovers in over my Christmas break and just now finished up the EDFC control (lots of delays etc....). Last week I got the car (with my track tires on) corner balanced and aligned for track/street driving. All I can say is.......... holy crap the car has been reborn. I highly recommend getting corner balanced and aligned after a coil over install. It is money well spent corner3garage likes this. __________________ Buddy Revell: "One man's sooner is another man's later"

04-04-2011, 03:55 PM	#2 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Where did you install the EDFC? __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

04-05-2011, 12:42 AM	#3 (permalink)
Nikon FM Track Member Join Date: Jan 2009 Location: Snoqualmie WA Posts: 973 Drives: 03 996TT Porsche Rep Power: 606	To the left of the steering wheel and right of the fob holder. The face is about 5" above the top of the fob holder. The three wires are barely visible running down and then behind/under the dash but at least my leg does not hit it. Before I ran the wires I had it mounted a bit lower and would bump my shin on it….didn't like that. __________________ Buddy Revell: "One man's sooner is another man's later"

04-05-2011, 01:13 AM	#4 (permalink)
kkruel55 Base Member Join Date: Jan 2010 Location: Houston, TX Posts: 206 Drives: '10 370Z Black M6 Rep Power: 15	I have the same setup to be installed this week. Looking at the wires, I am hoping to locate my box in the armrest hatch. __________________ 2010 Magnetic Black Coupe 6 speed-- Powerhouse Amuse//AP Racing//Volk Racing//Stillen//Tein//SPC//Hotchkis//INGS+1//MRWorks//Fast Intentions

04-06-2011, 01:30 AM	#6 (permalink)
Nikon FM Track Member Join Date: Jan 2009 Location: Snoqualmie WA Posts: 973 Drives: 03 996TT Porsche Rep Power: 606	Okay. I'll shoot a few in some good day light and post. __________________ Buddy Revell: "One man's sooner is another man's later"

04-06-2011, 07:43 PM	#9 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120	nice setup

04-07-2011, 09:42 AM	#10 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	Nikon do you have a front camber kit? curious because they adjusted it. also your camber is still not within factory spec. im not sure why its all green on the final adjustment print out. Last edited by fuct; 04-07-2011 at 09:45 AM.

04-07-2011, 11:15 PM	#11 (permalink)
Nikon FM Track Member Join Date: Jan 2009 Location: Snoqualmie WA Posts: 973 Drives: 03 996TT Porsche Rep Power: 606	No front camber kit although I believe there is some front camber adjustability with the coilovers. Thanks for the tip on "why is it green". I asked for a Track/DD setup so perhaps the settings are the compromise, but to my knowledge green is supposed to be "in spec". Whatever the settings the car sure handles well now. __________________ Buddy Revell: "One man's sooner is another man's later"

04-17-2011, 08:34 PM	#12 (permalink)
kkruel55 Base Member Join Date: Jan 2010 Location: Houston, TX Posts: 206 Drives: '10 370Z Black M6 Rep Power: 15	Imho, EDFC is very worth it. I can take my car from comfy for my girlfriend to stiff enough that I can have fun in the corners with it. And if I want to use the tires I'm running now at the track (Ventus V12s) then I can drive right on and switch on the fly... pretty neat. __________________ 2010 Magnetic Black Coupe 6 speed-- Powerhouse Amuse//AP Racing//Volk Racing//Stillen//Tein//SPC//Hotchkis//INGS+1//MRWorks//Fast Intentions

04-17-2011, 09:40 PM	#14 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521

04-18-2011, 07:27 AM	#15 (permalink)
kkruel55 Base Member Join Date: Jan 2010 Location: Houston, TX Posts: 206 Drives: '10 370Z Black M6 Rep Power: 15	Har har I bet I can turn faster than you __________________ 2010 Magnetic Black Coupe 6 speed-- Powerhouse Amuse//AP Racing//Volk Racing//Stillen//Tein//SPC//Hotchkis//INGS+1//MRWorks//Fast Intentions

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TEIN Flex & Monoflex Coilovers now available!	Ryan@Forged	Suspension/Brakes	326	04-19-2012 12:55 PM
.: \| TEIN at INSANE prices- something for ANY budget \| COILOVERS - SPRINGS - EDFC \|:.	SE	Suspension/Brakes	67	12-28-2011 02:13 AM
Tein Monoflex wit EDFC for roadster//	koh_akira	Nissan 370Z Roadster (Convertible)	10	02-07-2011 10:27 AM
FS: Tein monoflex, hotchkis F&R sways	1uk32	Parts for sale (Private Classifieds)	9	07-08-2010 04:30 PM
FS: TEIN MONOFLEX coilover.	spia	Parts for sale (Private Classifieds)	24	05-02-2010 02:45 AM