AP RACING BBK Review!

weiboy718

Hello all! i have used these AP Racing brakes for the past 4 months and all i can say is wow! it gives me a full smile every time i step on them. there were times that these brakes actually saved my @$$ from getting crushed by a semi truck who suddenly merged into my lane. i slammed on the brakes so hard that my seat belt choked the life out of me lol. AP Racing brakes is my life saver. this is the one of the best upgrade no doubt about it. can't go wrong with this setup. after using these i don't think i can ever use oem brakes again. thank you Stillen and Josh for setting me up with these beautiful brakes. i am enjoying them every time i use my car.

here's some spec's and pictures!


Front Kit - AP5700

Calipers: AP Racing 6 Piston Caliper (CP7041)
• Lightweight, pressure cast aluminum alloy 2-piece body for better pedal feel than typical monoblock calipers
• Fixed radial mount for minimal caliper flex
• Hard anodized, then finished with a tough 2-part paint system
• Differential piston bores minimize pad taper and maximize braking efficiency
• Secondary dust seals for everyday use
• Anti-Rattle clip to eliminate pad knock

Rotors: AP Racing 14.25” x 1.25” (362mm x 32mm)
• Two-piece modular rotor floats on aluminum hat
• Directionally curved vanes for maximum cooling
• Cross-drilled and slotted for aggressive pad bite and better face cooling
• Slotted only rotors optional

Brake Pads: Mintex Xtreme Motorsport Compound
• Xtremely high friction for race pad stopping power
• Excellent grip -- From cold to over 1300°F (700°C)
• Linear & predictable under all conditions

Brackets:
• Aluminum caliper mounting brackets for maximum strength and stiffness
• Anodized for durability and appearance

Brake Lines and Hardware:
• Stainless steel outer braid with PTFE inner


Rear Kit - AP3750

Calipers: AP Racing 4 Piston Caliper (CP5147)
• Lightweight, pressure cast aluminum alloy 2-piece body for better pedal feel than typical monoblock calipers
• Fixed radial mount for minimal caliper flex
• Hard anodized then finished with a tough 2-part paint system
• Differential piston bores minimize pad taper and maximize braking efficiency
• Secondary dust seals for everyday use
• Anti-Rattle clip to eliminate pad knock

Rotors: STILLEN Brake Pros Two-Piece Rotors (330mm x 25.5mm)
• Two-piece rotor design
• Directionally curved vanes for maximum cooling
• Cross-drilled and slotted for aggressive pad bite and better face cooling
• Retains OE parking brake function

Brake Pads: Mintex Xtreme Motorsport Compound
• Xtremely high friction for race pad stopping power
• Excellent grip -- From cold to over 1300°F (700°C)
• Linear & predictable under all conditions

Brake Lines and Hardware:
• Stainless steel outer braid with PTFE liner (DOT compliant)
• High performance hardware included

Brackets:
• Aluminum alloy mounting
6 Piston Fronts

4 Piston Rears