H&R or Swift Springs?

ClemsonWill · 03-08-2012, 03:03 PM

If you go FI exhaust you probably won't want to drop any more than the H&Rs. Mine hits under aggressive mountain runs and I'm on H&Rs.

UNKNOWN_370 · 03-08-2012, 03:18 PM

Quote:

Originally Posted by ClemsonWill

If you go FI exhaust you probably won't want to drop any more than the H&Rs. Mine hits under aggressive mountain runs and I'm on H&Rs.

It might be your springs? Most say you have 1.5" clearance to drop before you run into issues on the 2nd gen FI exhaust. The swifts are 1" in the rear. Tein's or Eibach Sportline would be too low.

ClemsonWill · 03-09-2012, 11:18 AM

Quote:

Originally Posted by UNKNOWN_370

It might be your springs? Most say you have 1.5" clearance to drop before you run into issues on the 2nd gen FI exhaust. The swifts are 1" in the rear. Tein's or Eibach Sportline would be too low.

1.5" is not much clearance when you are pushing the car hard on the street. Just my

Viera · 03-11-2012, 05:14 PM

Quote:

Originally Posted by ClemsonWill

1.5" is not much clearance when you are pushing the car hard on the street. Just my

^This. I hit my cans a couple times on mountain runs as well..

zellsexy · 12-28-2012, 05:22 PM

Do you guys know if the swift will rub with a 275/35/19 305/30/19 setup?

Z_Society · 06-20-2013, 12:23 PM

Just installed my H&R springs and gotta say i love, read a lot of reviews on here that said it was a bad DD or it was too low but its a perfect drop and no rub at all

BrandonSS · 06-20-2013, 12:52 PM

I love my H&Rs but they are low. The front chin spoiler is abused with dips in the road and simple rolled driveway curbs.

zfamous · 07-01-2013, 04:55 PM

Recently saw Tanabe post a 370 on some GF210's. The drop looks pretty decent. Not to low and even gap all around.

synolimit · 07-01-2013, 06:50 PM

Quote:

Originally Posted by CFZ

This spring compared to the oem is also different. The oem spring to me, picked up all the little cracks and uneven surfaces on the pavement. It wasnt uncomfortable or anything but then when going around a corner the car would roll a good amount. The Swift springs is almost the exact opposite. They absorb all the irregularities of the road. They are really smooth on the road, but when you take a corner there is no body roll.

By planted I mean that the steering is more responsive and the car grips. It's completely level through the corners. The thing is when I purchased these springs I was really afraid of the spring rates because they are so much stiffer than anything else on the market. But they are more than daily driveable, in fact they are smoother than stock.

The only real problem with these springs is the price. they retail at 419 dollars, and I bought mine for 335 shipped.

I track my car monthly and so I am extremely impressed by the design and rates of these springs. So if you occasionally track your car and are not looking for coilovers. These are in my opinion, "coilover performance" lowering springs with comfort of daily driving in mind.

TJ- do you tracked or Autox at all?

Been posted before?? How's your alignment though? They seem like a big drop and I've read the OEM setup can't really be aligned properly? Tires wear out quick?

synolimit · 07-01-2013, 07:22 PM

Quote:

Originally Posted by zellsexy

Do you guys know if the swift will rub with a 275/35/19 305/30/19 setup?

Anyone?

Sh0velMan · 07-01-2013, 07:25 PM

Quote:

Originally Posted by zellsexy

Do you guys know if the swift will rub with a 275/35/19 305/30/19 setup?

Probably depends more on the wheel and offset than the tire.

03-08-2012, 03:03 PM	#121 (permalink)
ClemsonWill A True Z Fanatic Join Date: Jul 2010 Location: Charleston, SC Posts: 12,045 Drives: a Civic VP! Rep Power: 445	If you go FI exhaust you probably won't want to drop any more than the H&Rs. Mine hits under aggressive mountain runs and I'm on H&Rs. __________________ Slightly modded

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift springs review!!!!!	CFZ	Brakes & Suspension	2166	09-10-2020 02:58 AM
RS-R springs?	GTRFAN	Brakes & Suspension	74	03-08-2012 09:41 AM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 11:46 AM
SWIFT Springs in Production	wishihadnav	Brakes & Suspension	200	02-01-2011 03:34 PM
Eibach springs vs H&R springs	xbigb4ller69z	Brakes & Suspension	8	07-27-2010 09:02 AM

12-28-2012, 05:22 PM	#125 (permalink)
zellsexy Base Member Join Date: Aug 2009 Location: la Posts: 152 Drives: 370z Rep Power: 16	Do you guys know if the swift will rub with a 275/35/19 305/30/19 setup?

07-01-2013, 04:55 PM	#128 (permalink)
zfamous Base Member Join Date: Apr 2013 Location: Southern, CA Posts: 13 Drives: 370z Rep Power: 12	Recently saw Tanabe post a 370 on some GF210's. The drop looks pretty decent. Not to low and even gap all around.