Awesome! Stats?! ^

Sooooo pretty. ..

To any of you guys that are very low, do your upper control arms bottom out and hit the body?

yes all the time hahah

only way i think it can be stopped is to get a higher springrate on coilovers but im not sure

A lot of what the VIP Lexus guys with real low ride heights do is cut a small notch in the fender well or just bash it in to allow more clearance.

Like so:
http://farm6.staticflickr.com/5455/9...b886ee4f_b.jpg

Then they weld in a ring to keep the structural support of the fender well.

Now I am not saying you should do this by any means, I am simply pointing out what they have been doing for years to remedy this problem.

Slammed on HKS Hipermax III

http://farm8.staticflickr.com/7302/1...3c6cfafd_c.jpg

Looks killer Iwan!

Specs of wheels/tires?

The best I could find from Iwan72's build thread...

Dropped on HKS Hipermax III , wheels K3 Projekt 1, front 20x9+15 with spacer putting it at -2..rear 20x11+15 with spacer putting it at +0. I didn't see any tire info, but I was just skimming through.

He's pretty secretive on the tire specs, may need to butter him up

You're correct, 20X9 ET18 fronts (ET-2 with 20mm spacers) and 20X11 ET25 (ET 0 with 25mm spacers) Tire wise, at the moment i'm running 225/35/20 up front and 255/35/20 on the rears. It's quite hard to find 215/205 for 20s :shakes head: I'm gonna downsize the rears to 245 in the future though.

:bowrofl::bowrofl::bowrofl:

can you post picture of how much of stretch it has?

http://farm6.staticflickr.com/5486/1...1d2bb764_z.jpg

http://farm6.staticflickr.com/5505/1...7662c010_z.jpg

http://farm8.staticflickr.com/7305/1...d9b43913_z.jpg

http://farm4.staticflickr.com/3682/1...da65c6d5_z.jpg

^^^^ Thank you for all these pics and specs! Helping me drastically on my wheel/tire sizing

http://www.the370z.com/members/kukpe...928-180711.jpg
:tiphat: