Slammed 370's Pics please!! :)

diego@vossen · 02-14-2013, 11:44 AM

Clean

Unique_Z · 02-14-2013, 11:57 AM

Nice

rAiN · 02-15-2013, 04:55 AM

just wondering if i can fit
10.4 -16 in the fronts?

VDC_OFF · 02-15-2013, 11:33 AM

Quote:

Originally Posted by rAiN

just wondering if i can fit
10.4 -16 in the fronts?

youre going to be sticking out 1.5 inchs or so. Going to need hella negative camber.

rAiN · 02-15-2013, 04:20 PM

Quote:

Originally Posted by VDC_OFF

youre going to be sticking out 1.5 inchs or so. Going to need hella negative camber.

oh wow... that sucks.
so what does half an inch equivalent in offsets?

Unique_Z · 02-15-2013, 04:43 PM

Quote:

Originally Posted by rAiN

oh wow... that sucks.
so what does half an inch equivalent in offsets?

Around 13mm, quite a lot mate

Good_Tymes · 02-17-2013, 06:25 PM

Quote:

Originally Posted by KaienZ34

.

Man so you need alot of other things in order to get just the "coil over"? Cambers whatever that is. Im about to look into it but dang seems like alot of things. I just want the lower street look. dont care too much for power. Thanks

sfearl1 · 02-17-2013, 08:21 PM

Quote:

Originally Posted by Good_Tymes

Man so you need alot of other things in order to get just the "coil over"? Cambers whatever that is. Im about to look into it but dang seems like alot of things. I just want the lower street look. dont care too much for power. Thanks

Depends on how low you are going and the wheels you're running. Yes a lot of variables come into play. If you're still on stock wheels you can get away with just spacers and springs

Good_Tymes · 02-21-2013, 09:38 AM

Quote:

Originally Posted by 3SeventyZ

KW V3's

Is the sports package the same body style as the base model? What modes on the outside do you have? I like this look and drop height

Punk86 · 02-21-2013, 10:47 AM

Quote:

Originally Posted by rAiN

just wondering if i can fit
10.4 -16 in the fronts?

I currently have 19x10 -9 on the front of my car, so you would poke an additional 12mm from me. To get my fronts to fit i had to get camber arms which put me close to -4 camber and I had to roll my fenders and stretch my tires. Currently running a 225/40 on my 19x10

The 10.4 -16 might fit in the back depending on the size tire and amount of camber.

Good_Tymes · 02-21-2013, 12:40 PM

Quote:

Originally Posted by KaienZ34

I don't know his setup he's name on here is dirTy_shoez but this one is real not photoshopped.

Can someone tell me what size drop he has (or might have) and wheels + rims. I like how the rims go inside instead of poppin out....if that makes sense. HELP

rAiN · 02-22-2013, 11:40 PM

Quote:

Originally Posted by Punk86

I currently have 19x10 -9 on the front of my car, so you would poke an additional 12mm from me. To get my fronts to fit i had to get camber arms which put me close to -4 camber and I had to roll my fenders and stretch my tires. Currently running a 225/40 on my 19x10

The 10.4 -16 might fit in the back depending on the size tire and amount of camber.

i dont mind stretching tires with negative camber, but rolling fender starting to concern me.

Punk86 · 02-23-2013, 12:09 PM

Quote:

Originally Posted by rAiN

i dont mind stretching tires with negative camber, but rolling fender starting to concern me.

yeah, thats when you get into the realm of irreversible modifications... at least not without spending a lot of money.

sfearl1 · 02-23-2013, 12:42 PM

Really though, a fender roll is a very minor modification.

Jimmy, I may have missed it.. Did you roll rears too or just fronts? I'm only doing fronts tomorrow, unless you think I should do all four corners.

Ni55anPat · 02-23-2013, 02:28 PM

My new setup will consist of:

19x9: -3 offset
19x10: -25 offset

Front: 225/40? or35?
Rear: 245/35

I hope to achieve this will about -3 camber all around.

How can you roll the rears? they're flat already?

02-14-2013, 11:57 AM	#377 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 18	Nice __________________ My Z Build UniqueZ

02-23-2013, 12:42 PM	#389 (permalink)
sfearl1 A True Z Fanatic Join Date: Oct 2011 Location: St. Louis Posts: 2,300 Drives: 2013 FBO E85 GTR Rep Power: 18	Really though, a fender roll is a very minor modification. Jimmy, I may have missed it.. Did you roll rears too or just fronts? I'm only doing fronts tomorrow, unless you think I should do all four corners. __________________ Scott

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
best exhaust for slammed cars	Liquid_G	Intake/Exhaust	22	09-16-2013 04:51 PM
2011 Mercedes E-class slammed on Vossen VVS-086	jav@vossen	Other Vehicles	4	06-27-2010 12:11 PM
:::Mercedes CLS55 slammed on the new Vossen VVS-CV1 (DEEP CONCAVE)	jav@vossen	Other Vehicles	7	05-07-2010 12:58 AM
>>White Mercedes CLS55 slammed on Vossen VVS086<<	jav@vossen	Other Vehicles	3	05-03-2010 11:10 AM
Are You Seeing 370's Out There? I'm not...	OldGuy	Nissan 370Z General Discussions	64	01-04-2010 12:34 AM

02-14-2013, 11:44 AM	#376 (permalink)
diego@vossen Track Member Join Date: Dec 2012 Location: Miami Posts: 614 Drives: Nismo 370Z 6MT Tech Rep Power: 14	Clean

02-15-2013, 04:55 AM	#378 (permalink)
rAiN Track Member Join Date: Jan 2009 Location: va Posts: 721 Drives: 2012 370z mt Rep Power: 17	just wondering if i can fit 10.4 -16 in the fronts?

02-23-2013, 02:28 PM	#390 (permalink)
Ni55anPat A True Z Fanatic Join Date: Mar 2010 Location: Chicago Posts: 1,831 Drives: Zed Rep Power: 18	My new setup will consist of: 19x9: -3 offset 19x10: -25 offset Front: 225/40? or35? Rear: 245/35 I hope to achieve this will about -3 camber all around. How can you roll the rears? they're flat already?