Coilover clicks settings! What do you have?

cab83_750 · 10-24-2010, 04:25 PM

For people with coilovers, what settings do you have? Also, do you have the same settings for front and rears?

My Teins' rear adjusters aren't accessible unless I raise the car, so I thought i would inquire some baseline.

Thanks.

import111 · 10-24-2010, 07:05 PM

Everyone is gonna give you a different answer. It is based on personal preference and what kind of car you like to drive.

I like a very stiff car so with the 370Z I started full stiff front and rear, and then softened up the rear until I still had over steer but also balance. I am at 5 clicks from full stiff right now and very happy with it. BC BR coilovers 10k/8k spring rates.

With my old 05 STi I had same spring rates but because I didn't have to worry about over steer as much I was happy at full stiff front and rear with that car.

You can also adjust the way the car behaves with tire pressure changes, alignment settings and so on. It can take a lot of trial and error to get a car set up the way you like it but when you hit that sweet spot, it is awesome. Good luck and have fun.

kenchan · 10-24-2010, 08:02 PM

Start with the middle setting front and rear and play with it.

Mike · 10-24-2010, 08:26 PM

I've got Tein Monoflex and go with 8 front and back.

cab83_750 · 10-24-2010, 09:55 PM

Quote:

Originally Posted by kenchan

Start with the middle setting front and rear and play with it.

That's what I have now for base. Will adjust/play with settings once it stops raining. The world lied to me; I thought .....

"it never rains in California!"

10-24-2010, 04:25 PM	#1 (permalink)
cab83_750 Track Member Join Date: Apr 2009 Location: CA Posts: 887 Drives: 09 NISSAN 370Z Rep Power: 417	Coilover clicks settings! What do you have? For people with coilovers, what settings do you have? Also, do you have the same settings for front and rears? My Teins' rear adjusters aren't accessible unless I raise the car, so I thought i would inquire some baseline. Thanks.

10-24-2010, 08:26 PM	#4 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	I've got Tein Monoflex and go with 8 front and back. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OEM Nismo Alignment settings?	Jordo!	Brakes & Suspension	14	12-18-2023 09:41 PM
KW Coilover Settings and Review	abakja1	Brakes & Suspension	30	06-21-2017 09:37 PM
Hotchkis sway bar settings?	EVL370	Brakes & Suspension	3	06-14-2010 11:42 PM
Comfort & Convenience settings.	s.storm	Nissan 370Z General Discussions	0	05-24-2010 07:13 AM
Crossover Settings?	bpd138	Audio & Video	4	05-30-2009 03:12 PM

10-24-2010, 07:05 PM	#2 (permalink)
import111 Track Member Join Date: Feb 2009 Location: Tucson, AZ. Posts: 622 Drives: 09 Nissan 370Z Rep Power: 191	Everyone is gonna give you a different answer. It is based on personal preference and what kind of car you like to drive. I like a very stiff car so with the 370Z I started full stiff front and rear, and then softened up the rear until I still had over steer but also balance. I am at 5 clicks from full stiff right now and very happy with it. BC BR coilovers 10k/8k spring rates. With my old 05 STi I had same spring rates but because I didn't have to worry about over steer as much I was happy at full stiff front and rear with that car. You can also adjust the way the car behaves with tire pressure changes, alignment settings and so on. It can take a lot of trial and error to get a car set up the way you like it but when you hit that sweet spot, it is awesome. Good luck and have fun.

10-24-2010, 08:02 PM	#3 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Start with the middle setting front and rear and play with it.