Swift springs review!!!!!

kensnismo · 02-21-2011, 03:42 PM

I'm considering the swifts to take away some of the harshness and to bring the car lower.maybe some 305/30x19 in the rears to

JJ-NISMO · 02-21-2011, 04:22 PM

Quote:

Originally Posted by kensnismo

I'm considering the swifts to take away some of the harshness and to bring the car lower.maybe some 305/30x19 in the rears to

I did a Nismo review on the Swifts... search for the post for full details.

In summary, the Swifts seem to reduce some of the recoil in the stock Nismo suspension. I noticed that when going over ripples or bumps, the Nismo suspenion compresses nicely, but recoils with a lot of force, providing a bouncing sensation. The Swift springs are stiffer, but do smooth out the recoil. With the Swifts, the car will still have a very tight set-up, but without the jerking sensation. Overall handling is improved as well.

kensnismo · 02-21-2011, 05:25 PM

Did search found your review.Thanks

JJ-NISMO · 02-26-2011, 02:39 PM

UPDATE: Still no creaking in the springs. I think the OEM rubber install did the trick. Make sure you guys swap the rubber from your OEM springs if you go with the Swifts

LOU@AMPLIFIED · 02-26-2011, 03:11 PM

Quote:

Originally Posted by JJ-NISMO

UPDATE: Still no creaking in the springs. I think the OEM rubber install did the trick. Make sure you guys swap the rubber from your OEM springs if you go with the Swifts

That's good news JJ
Guys with swift, OEM rubber sleeve should be places on the bottom part of the spring, not on top since the top mount is rubber and will not cause it to creek but the bottom of the spring sits on metal from the front struts.

J, I didn't get a chance to take a picture, can you?

Thanks

JJ-NISMO · 02-26-2011, 05:28 PM

Quote:

Originally Posted by LOU@AMPLIFIED

That's good news JJ
Guys with swift, OEM rubber sleeve should be places on the bottom part of the spring, not on top since the top mount is rubber and will not cause it to creek but the bottom of the spring sits on metal from the front struts.

J, I didn't get a chance to take a picture, can you?

Thanks

Hey Lou, I will take a pic and upload it as soon as I can! May take until tomorrow.

Like Lou said, put the OEM rubber on the bottom part of the front springs. The metal to metal contact can cause some rubbing (creaking noises), but once the rubber is on there it is nice and quiet

Viera · 02-27-2011, 07:23 AM

Quote:

Originally Posted by JJ-NISMO

Hey Lou, I will take a pic and upload it as soon as I can! May take until tomorrow.

Like Lou said, put the OEM rubber on the bottom part of the front springs. The metal to metal contact can cause some rubbing (creaking noises), but once the rubber is on there it is nice and quiet

Question, are we putting the OEM rubber on just the bottom of the front springs, or are you putting them on both the front and rears? Thanks.

JJ-NISMO · 02-27-2011, 12:16 PM

Quote:

Originally Posted by Viera

Question, are we putting the OEM rubber on just the bottom of the front springs, or are you putting them on both the front and rears? Thanks.

Only the front pair. Your OEM springs should only have the rubber on the front; transfer the rubber to the new springs when installing. Put the rubber on the bottom coil of the Swifts so that it eliminates the metal on metal contact.

Viera · 02-27-2011, 04:00 PM

^Ah, gotcha. Thank you, sir!

FricFrac · 03-01-2011, 02:12 PM

Quote:

Originally Posted by JJ-NISMO

Spring manufacturers should include all necessary parts. You should not have to mix and match parts for an aftermarket piece IMO.

Also, which coil did your put your OEM rubber on? The Swifts come with a sleeve already placed in the upper middle of the front springs.

The rubber sleeves (silencers) will not affect the performance at all. They are simply to reduce noise and will prevent metal on metal contact. The material is very thin and will have no real effect when compressed.

Do you currently have the swifts and are looking for a softer ride or are you considering the Swifts to ease the harshness of the Nismo ride?

Right - the springs should come ready to go with the rubber boots, bump stops, struts, mounting bolts, etc

CFZ · 03-02-2011, 11:14 AM

I went with my friend to get his car aligned at Evasive and they have a few sets in stock. Just letting you guys know. I dont know if there is still a problem with these springs being out of stock.

Baer383 · 03-02-2011, 12:04 PM

Are you guys using or needing toe bolts when your swift springs are in.

birdmanx1 · 03-03-2011, 03:23 PM

Quote:

Originally Posted by CFZ

I went with my friend to get his car aligned at Evasive and they have a few sets in stock. Just letting you guys know. I dont know if there is still a problem with these springs being out of stock.

Thanks for the heads up CFZ, I was waiting the end of the month for KamiSpeed to get a new shipment. I just called Evasive and ordered a set. They have 2 more left.

370zjames · 03-03-2011, 03:31 PM

Ok I just ordered last set from Evasive!!!! It's all gone!!

370zjames · 03-03-2011, 04:16 PM

Quote:

Originally Posted by CFZ

I went with my friend to get his car aligned at Evasive and they have a few sets in stock. Just letting you guys know. I dont know if there is still a problem with these springs being out of stock.

Thank U!!!!!!

03-02-2011, 12:04 PM	#252 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	Are you guys using or needing toe bolts when your swift springs are in. __________________ 2013 ZL1 754 rwhp 747 rwtq Last edited by Baer383; 03-03-2011 at 07:38 PM.

03-03-2011, 03:31 PM	#254 (permalink)
370zjames Enthusiast Member Join Date: Sep 2010 Location: Silverdale, WA Posts: 404 Drives: 10' 370Z 6MT/ Sports Rep Power: 15	Ok I just ordered last set from Evasive!!!! It's all gone!! Last edited by 370zjames; 03-03-2011 at 04:06 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift Springs-- Nismo Review!!	JJ-NISMO	Brakes & Suspension	39	07-29-2014 07:59 AM
[WTB] Swift Springs	Beastmode	Parts for sale (Private Classifieds)	1	09-13-2011 04:46 PM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 10:46 AM
WTB: Swift or H&R Springs	Mr&Mrs	Wanted	5	04-26-2011 10:51 PM
Swift Springs	Justin1686	North East Region	10	02-24-2011 06:58 PM

02-21-2011, 03:42 PM	#241 (permalink)
kensnismo Enthusiast Member Join Date: Jan 2011 Location: north tx Posts: 324 Drives: ZL-1 Rep Power: 15	I'm considering the swifts to take away some of the harshness and to bring the car lower.maybe some 305/30x19 in the rears to

02-21-2011, 05:25 PM	#243 (permalink)
kensnismo Enthusiast Member Join Date: Jan 2011 Location: north tx Posts: 324 Drives: ZL-1 Rep Power: 15	Did search found your review.Thanks

02-26-2011, 02:39 PM	#244 (permalink)
JJ-NISMO Enthusiast Member Join Date: Feb 2010 Location: SoCal Posts: 276 Drives: 09 NISMO 370Z PG Rep Power: 243	UPDATE: Still no creaking in the springs. I think the OEM rubber install did the trick. Make sure you guys swap the rubber from your OEM springs if you go with the Swifts

02-27-2011, 04:00 PM	#249 (permalink)
Viera Track Member Join Date: Feb 2009 Location: Atlanta, GA Posts: 897 Drives: '09 M.Blue 370Z 6MT Rep Power: 265	^Ah, gotcha. Thank you, sir!

03-02-2011, 11:14 AM	#251 (permalink)
CFZ Base Member Join Date: Jul 2010 Location: F-Town Posts: 134 Drives: 2010 370Z Rep Power: 234	I went with my friend to get his car aligned at Evasive and they have a few sets in stock. Just letting you guys know. I dont know if there is still a problem with these springs being out of stock.