Swift springs review!!!!!

christian370z · 01-06-2011, 09:00 PM

I got mine at Kamispeed for $330 shipped which was the best deal I could find. I am not sure if they still have any left in stock, last I checked they had one set a month ago.

VaGntlmn · 01-06-2011, 09:15 PM

At KamiSpeed I was looking at list.

Thanks guys

CrownR426 · 01-06-2011, 11:29 PM

Wheres the best price for these?

ClemsonWill · 01-07-2011, 09:55 AM

I kind of wish I had gone with these over the H&R. Oh well. I'll be getting coilovers in the future.

VaGntlmn · 01-07-2011, 08:45 PM

Quote:

Originally Posted by CrownR426

Wheres the best price for these?

I just ordered mine from KamiSpeed. $335 w/ free ground shipping.
Hoping to get them installed on the 17th

JGreenwood07 · 01-10-2011, 12:11 AM

Just ordered mine last week from KamiSpeed as well. Spoke to someone on the phone and apparently the next shipment is in port and should be headed to customers this week.

Fusionr · 01-10-2011, 12:51 PM

Quote:

Originally Posted by WDRead

I just ordered mine from KamiSpeed. $335 w/ free ground shipping.
Hoping to get them installed on the 17th

If you don't add any type of camber correction Could you post your camber angle numbers after its aligned, the shop can provide you with camber, caster, and toe settings.

CrownR426 · 01-10-2011, 01:58 PM

Quote:

Originally Posted by Fusionr

If you don't add any type of camber correction Could you post your camber angle numbers after its aligned, the shop can provide you with camber, caster, and toe settings.

I still think you need rear camber kit.

christian370z · 01-10-2011, 03:27 PM

^Depends on whether you want to get back to stock specs. These springs still let you get back within the factory range for camber front and rear so camber arms are not a must and tire wear will still be acceptable.

tjlazer · 01-10-2011, 10:30 PM

Quote:

Originally Posted by CrownR426

I still think you need rear camber kit.

I didn't. Got the rears to -1.9 degrees.

DIGItonium · 01-11-2011, 01:26 AM

tjlazer, how's your FI exhaust holding up? I'm debating about getting these springs in combination with 245/40 & 285/35 or 275/35 & 305/30. I'm probably spamming all over the place since it's driving me nuts. I've scraped the exhaust a few times due to some crappy steep driveways, but the front bumper rarely gets scraped.

LunaZ · 01-11-2011, 08:53 AM

In for updates after you guys put some more miles on the springs.
I also have a FI cat-back, so if any of you guys who have these springs and the same exhausts could comment on whether or not you're scraping, that would be great!
THX!

tjlazer · 01-11-2011, 11:31 AM

Quote:

Originally Posted by DIGItonium

tjlazer, how's your FI exhaust holding up? I'm debating about getting these springs in combination with 245/40 & 285/35 or 275/35 & 305/30. I'm probably spamming all over the place since it's driving me nuts. I've scraped the exhaust a few times due to some crappy steep driveways, but the front bumper rarely gets scraped.

Great! Haven't scraped the cans not once!

VaGntlmn · 01-11-2011, 09:21 PM

I was hoping to get these installed next monday (Jan 17), but it looks like that's not going to happen. I (also) spoke with somebody at KamiSpeed, and they told me that the springs had made it past customs in California, but still had to be delivered to them before they could turn around and ship them to me.
It's now tuesday night and my springs have not yet been shipped. :-( Not looking good.

After they're installed, I'll be more than happy to post the numbers.
I was planning to wait about 2 weeks before getting a 4-wheel alignment (give them a chance to settle in a little bit).
If I need a camber kit, I'll be SURE to let you know.

CrownR426 · 01-12-2011, 12:42 AM

265,305

01-06-2011, 09:00 PM	#91 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 432	I got mine at Kamispeed for $330 shipped which was the best deal I could find. I am not sure if they still have any left in stock, last I checked they had one set a month ago. __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

01-06-2011, 09:15 PM	#92 (permalink)
VaGntlmn Enthusiast Member Join Date: May 2010 Location: Centreville, Va Age: 64 Posts: 378 Drives: '10 Tour/Sport, 6MT Rep Power: 15	At KamiSpeed I was looking at list. Thanks guys __________________ Bill 2010 370z; Tour/Sport; 6mt; BlackCherry/Grey; 318 rwhp; 265 lbs rwtq. To view a list of my mods, click here; To view a photo journal of the mods, click here. Last edited by VaGntlmn; 01-07-2011 at 08:43 PM.

01-06-2011, 11:29 PM	#93 (permalink)
CrownR426 A True Z Fanatic Join Date: Nov 2008 Location: South Korea Posts: 4,676 Drives: Manual Rep Power: 848	Wheres the best price for these? __________________ Love + Hardwork + Passion RIP SVTRacer

01-07-2011, 09:55 AM	#94 (permalink)
ClemsonWill A True Z Fanatic Join Date: Jul 2010 Location: Charleston, SC Posts: 12,045 Drives: a Civic VP! Rep Power: 445	I kind of wish I had gone with these over the H&R. Oh well. I'll be getting coilovers in the future. __________________ Slightly modded

01-10-2011, 03:27 PM	#99 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 432	^Depends on whether you want to get back to stock specs. These springs still let you get back within the factory range for camber front and rear so camber arms are not a must and tire wear will still be acceptable. __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

01-10-2011, 12:11 AM	#96 (permalink)
JGreenwood07 Base Member Join Date: Apr 2010 Location: Houston, TX Posts: 137 Drives: '10 Z Sprt/Tour/Nav Rep Power: 15	Just ordered mine last week from KamiSpeed as well. Spoke to someone on the phone and apparently the next shipment is in port and should be headed to customers this week.

01-11-2011, 01:26 AM	#101 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	tjlazer, how's your FI exhaust holding up? I'm debating about getting these springs in combination with 245/40 & 285/35 or 275/35 & 305/30. I'm probably spamming all over the place since it's driving me nuts. I've scraped the exhaust a few times due to some crappy steep driveways, but the front bumper rarely gets scraped. __________________

01-11-2011, 08:53 AM	#102 (permalink)
LunaZ A True Z Fanatic Join Date: Mar 2010 Location: Vagabond Posts: 6,704 Drives: Project: a white one Rep Power: 512	In for updates after you guys put some more miles on the springs. I also have a FI cat-back, so if any of you guys who have these springs and the same exhausts could comment on whether or not you're scraping, that would be great! THX! __________________ 2009 370Z Sport/Touring/Navigation \| see my journal for mods facebook: Be my friend... or not.

01-11-2011, 09:21 PM	#104 (permalink)
VaGntlmn Enthusiast Member Join Date: May 2010 Location: Centreville, Va Age: 64 Posts: 378 Drives: '10 Tour/Sport, 6MT Rep Power: 15	I was hoping to get these installed next monday (Jan 17), but it looks like that's not going to happen. I (also) spoke with somebody at KamiSpeed, and they told me that the springs had made it past customs in California, but still had to be delivered to them before they could turn around and ship them to me. It's now tuesday night and my springs have not yet been shipped. :-( Not looking good. After they're installed, I'll be more than happy to post the numbers. I was planning to wait about 2 weeks before getting a 4-wheel alignment (give them a chance to settle in a little bit). If I need a camber kit, I'll be SURE to let you know. __________________ Bill 2010 370z; Tour/Sport; 6mt; BlackCherry/Grey; 318 rwhp; 265 lbs rwtq. To view a list of my mods, click here; To view a photo journal of the mods, click here.

01-12-2011, 12:42 AM	#105 (permalink)
CrownR426 A True Z Fanatic Join Date: Nov 2008 Location: South Korea Posts: 4,676 Drives: Manual Rep Power: 848	265,305 __________________ Love + Hardwork + Passion RIP SVTRacer

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift Springs-- Nismo Review!!	JJ-NISMO	Brakes & Suspension	39	07-29-2014 08:59 AM
[WTB] Swift Springs	Beastmode	Parts for sale (Private Classifieds)	1	09-13-2011 05:46 PM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 11:46 AM
WTB: Swift or H&R Springs	Mr&Mrs	Wanted	5	04-26-2011 11:51 PM
Swift Springs	Justin1686	North East Region	10	02-24-2011 07:58 PM