Swift springs review!!!!!

christian370z

You don't want 0 camber. Even the stock setup has some negative camber to aide with handling and response. Negative camber yields more grip. 0-1 degree of negative camber is better for tire wear, 1-2 degrees of negative camber is the optimal performance range for most cars while not completely sacrificing tire wear.

Basically, you want enough camber to enhance grip but not enough to put excessive pressure on the inside corner of the tire.

__________________
-320whp / 259wftlbs-
SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

Zoren 370

A zero camber is only good if you drag race on a straight line.
But if you like to track or drive hard on curves then you loose grip and would be dangerous.
Besides Nissan designed the car to handle great on turns to take >1 g.

I would think you will loose what you have paid for... the performance of the car. That is the same reason why I got this Z vs the Z4M.

The Z4 is a better DD but performance wise the Z would be the best car under 50K.
Which you only get on a supercar.
I always say I have a poor mans Porsche.