Swift springs review!!!!!

ggiwin · 08-27-2011, 07:35 PM

now i dont know if i should get a rear camber kit.. How many people here run around -2.3 to -2.5 camber in the rears? How is your tire worn after a certain amount of miles?

tsolin01 · 08-27-2011, 11:39 PM

I've got -1.5 front and -2.5 rear also, it's been close to like 10k miles so far and the tires look ok. Gonna recheck alignment probably in a month or two but I don't expect any issues. When I get a chance I can take pics of what the tread looks like so far.

CFZ · 08-28-2011, 03:32 PM

-2.5 is not an uncommon setup for the rear on a track/dd. I had intentions of going to the track and I purchase r-compounds and a slightly more aggressive alignment (I can post up alignment specs when I get a chance but my rears were set at 2.7), but I killed off a whole set of tires from just dd'ing because I was a little busy with life. The wear was even through the contact patch when I replaced the tires. I think the stickier tires have something to do with it as well.

Boost_lee · 08-28-2011, 04:58 PM

Finally got my car aligned. I've been riding on these for 9-10 months, probably a couple thousand miles.

I didn't get a shot of the final specs, but we got the rear camber down to 2.6 and 2.4, corrected the toe for the front/rear, and left the front camber as is. No camber kit or toe bolts were used at all, and I'll leave the specs as is since it is not a daily driver

smokejr · 09-10-2011, 12:11 PM

Got my Swift springs installed and put 1200 miles on and then had an
alignment, looks like I might need to add the camber kits, I noticed the car
drove better after the alignment, and the Swift's are pretty nice to, especially
over 40mph.

Mandingo · 09-10-2011, 06:50 PM

Actually I'd say you're ok with those numbers. Front is definitely fine as is. You could put a camber kit on the rear if you feel like it but -2.1 and -2.2 on the rears isn't bad.

edub370 · 09-10-2011, 07:02 PM

anyone else have a slight rattle after the swift install? i have a very slight rattle that i can hear when i go over bumps from my front passenger side but cant seem to track down. sway bars are tight which i thought would be the culprit.

anyone have any ideas on what i could be hearing?

Alchemy · 09-10-2011, 07:06 PM

Quote:

Originally Posted by edub370

anyone else have a slight rattle after the swift install? i have a very slight rattle that i can hear when i go over bumps from my front passenger side but cant seem to track down. sway bars are tight which i thought would be the culprit.

anyone have any ideas on what i could be hearing?

Ill be the first to say the common reply. Did you install the rubber pieces from the stock springs on the Swifts???

edub370 · 09-10-2011, 07:09 PM

yea i sure did. thats why im not really sure what it could be

Amuse370z · 09-12-2011, 05:25 AM

Is a drop like this (perfect imo) do-able with swifts?

Alchemy · 09-12-2011, 07:53 AM

^The space around the wheels looks similar to what it would look like on Swifts. Though The actual car body seems a bit lower, not sure if thats due to the Amuse kit or not. The Swift drop is not as extreme as others on the market. I never measured mine to see how much it actually dropped but I believe Swifts drop it about 1.25" front and a little less than that in the rear.

AlphaSnacks · 09-12-2011, 09:29 AM

That red car looks almost like stock drop, imo.

Amuse370z · 09-12-2011, 09:32 AM

The red car uses coilovers but the drop is not big at all, its similar to the swift springs so I was wondering if those with it can confirm whether the drop will look similar to that.

Yes, the body kit does make the actual car lower too

Alchemy · 09-12-2011, 10:03 AM

Here is my Z on swifts. This pic was just after installation. They def settled a bit more after I put some miles on it. IMO Swifts give it the perfect drop and the performance is amazing. Dont delay, just pull the trigger!!

edub370 · 09-12-2011, 10:09 AM

anyone..? thoughts on this mystery rattle... still havent tracked it down

08-27-2011, 11:39 PM	#842 (permalink)
tsolin01 Track Member Join Date: Feb 2010 Location: Dallas, TX Posts: 657 Drives: 2010 370Z Rep Power: 16	I've got -1.5 front and -2.5 rear also, it's been close to like 10k miles so far and the tires look ok. Gonna recheck alignment probably in a month or two but I don't expect any issues. When I get a chance I can take pics of what the tread looks like so far. __________________ SOLD 12/30/2011 2010 370Z Coupe Monterey Blue 6MT/Touring/Sport/Nav F.I. CBE CF w/ 12" Res \| V1 \| SecondSkin \| Stillen G3 \| EVO-R CF B-Pillars \| Volk GT-S Ti Gunmetal 19x9.5 +30 F, 19x10.5 +8 R \| Swift Spec-R Springs

08-28-2011, 04:58 PM	#844 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	Finally got my car aligned. I've been riding on these for 9-10 months, probably a couple thousand miles. I didn't get a shot of the final specs, but we got the rear camber down to 2.6 and 2.4, corrected the toe for the front/rear, and left the front camber as is. No camber kit or toe bolts were used at all, and I'll leave the specs as is since it is not a daily driver __________________ My TT Z

09-10-2011, 06:50 PM	#846 (permalink)
Mandingo Track Member Join Date: Nov 2010 Location: Dallas Posts: 625 Drives: '10 370z 6spd Rep Power: 3371	Actually I'd say you're ok with those numbers. Front is definitely fine as is. You could put a camber kit on the rear if you feel like it but -2.1 and -2.2 on the rears isn't bad. __________________ some mods

09-10-2011, 07:02 PM	#847 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	anyone else have a slight rattle after the swift install? i have a very slight rattle that i can hear when i go over bumps from my front passenger side but cant seem to track down. sway bars are tight which i thought would be the culprit. anyone have any ideas on what i could be hearing? __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

09-10-2011, 07:09 PM	#849 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	yea i sure did. thats why im not really sure what it could be __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

08-27-2011, 07:35 PM	#841 (permalink)
ggiwin Base Member Join Date: Jun 2010 Location: orange county Posts: 226 Drives: 2010 AT PW Rep Power: 15	now i dont know if i should get a rear camber kit.. How many people here run around -2.3 to -2.5 camber in the rears? How is your tire worn after a certain amount of miles?

08-28-2011, 03:32 PM	#843 (permalink)
CFZ Base Member Join Date: Jul 2010 Location: F-Town Posts: 134 Drives: 2010 370Z Rep Power: 234	-2.5 is not an uncommon setup for the rear on a track/dd. I had intentions of going to the track and I purchase r-compounds and a slightly more aggressive alignment (I can post up alignment specs when I get a chance but my rears were set at 2.7), but I killed off a whole set of tires from just dd'ing because I was a little busy with life. The wear was even through the contact patch when I replaced the tires. I think the stickier tires have something to do with it as well.

09-12-2011, 05:25 AM	#850 (permalink)
Amuse370z A True Z Fanatic Join Date: Jan 2011 Location: Toronto Posts: 1,170 Drives: '13 PW Fairlady Z Rep Power: 16	Is a drop like this (perfect imo) do-able with swifts?

09-12-2011, 07:53 AM	#851 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 44 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	^The space around the wheels looks similar to what it would look like on Swifts. Though The actual car body seems a bit lower, not sure if thats due to the Amuse kit or not. The Swift drop is not as extreme as others on the market. I never measured mine to see how much it actually dropped but I believe Swifts drop it about 1.25" front and a little less than that in the rear. __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

09-12-2011, 09:29 AM	#852 (permalink)
AlphaSnacks A True Z Fanatic Join Date: Jan 2010 Location: Windermere, FL Posts: 1,618 Drives: '13 XKR-S, '10 370Z Rep Power: 18	That red car looks almost like stock drop, imo.

09-12-2011, 09:32 AM	#853 (permalink)
Amuse370z A True Z Fanatic Join Date: Jan 2011 Location: Toronto Posts: 1,170 Drives: '13 PW Fairlady Z Rep Power: 16	The red car uses coilovers but the drop is not big at all, its similar to the swift springs so I was wondering if those with it can confirm whether the drop will look similar to that. Yes, the body kit does make the actual car lower too

09-12-2011, 10:03 AM	#854 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 44 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	Here is my Z on swifts. This pic was just after installation. They def settled a bit more after I put some miles on it. IMO Swifts give it the perfect drop and the performance is amazing. Dont delay, just pull the trigger!! ortiz73ca likes this. __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

09-12-2011, 10:09 AM	#855 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	anyone..? thoughts on this mystery rattle... still havent tracked it down __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift Springs-- Nismo Review!!	JJ-NISMO	Brakes & Suspension	39	07-29-2014 08:59 AM
[WTB] Swift Springs	Beastmode	Parts for sale (Private Classifieds)	1	09-13-2011 05:46 PM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 11:46 AM
WTB: Swift or H&R Springs	Mr&Mrs	Wanted	5	04-26-2011 11:51 PM
Swift Springs	Justin1686	North East Region	10	02-24-2011 07:58 PM