Swift springs review!!!!!

AlphaSnacks · 06-02-2011, 04:58 PM

Someone sell me your Swifts. I can't wait for my order anymore. Been over a month and I'm tired of driving the car with OEM springs.

PM me if you're selling. I'm totally serious.

Red__Zed · 06-02-2011, 05:01 PM

Quote:

Originally Posted by Arnold K.

Someone sell me your Swifts. I can't wait for my order anymore. Been over a month and I'm tired of driving the car with OEM springs.

PM me if you're selling. I'm totally serious.

$400 shipped

czheng51 · 06-03-2011, 02:27 PM

Quote:

Originally Posted by CFZ

I spoke to Swift about the noises and they sounded really confident that the OEM spring jacket was not on. I had no clue what they were talking about but they sent me a picture and apparently yours doesnt have it on. That will directly affect the squish noise. They assured me that it was tested on the Nismo and the springs will not cause any problems as long as installed correctly.
The reason why your vehicle is making noises is because the OEM spring jacket is not on the spring.

So this is exactly how i should install the rubber piece on the springs?

christian370z · 06-04-2011, 02:55 AM

Quote:

Originally Posted by czheng51

So this is exactly how i should install the rubber piece on the springs?

Yes, that is how the spring should look before you install it.

ZoomtoZ · 06-06-2011, 05:14 PM

Had my Swifts installed and aligned the same day (didn't plan on alignment at the same time but I gave in).

Here are my results after alignment

Front
L/R
-1.4/-1.3
Camber

5.7/5.6
Caster

.08/.09
Toe

Rear
L/R
-2.6/-2.2
Camber

.12/.12
Toe

I guess i will have to get Rear camber arms later on but i don't think the rears are too bad. I'm looking to get in spec and not looking for any other advantages. If L/R rears were closer maybe i would just left them alone...

What do you all think? Should i give it more miles and then recheck alignment?

FYI the rear camber was -3/-2.9 before adjusting.

Mandingo · 06-06-2011, 06:26 PM

I would wait a week or 2 and get it realigned but thats just me.

Can't wait for my springs to come in!

Alchemy · 06-06-2011, 06:35 PM

I have heard drive on them for roughly 500 miles then align.

BRI888 · 06-06-2011, 07:36 PM

What model is that swift springs? How much is it? Is the ride bumpy?

Red__Zed · 06-06-2011, 07:36 PM

Quote:

Originally Posted by ZoomtoZ

Had my Swifts installed and aligned the same day (didn't plan on alignment at the same time but I gave in).

Here are my results after alignment

Front
L/R
-1.4/-1.3
Camber

5.7/5.6
Caster

.08/.09
Toe

Rear
L/R
-2.6/-2.2
Camber

.12/.12
Toe

I guess i will have to get Rear camber arms later on but i don't think the rears are too bad. I'm looking to get in spec and not looking for any other advantages. If L/R rears were closer maybe i would just left them alone...

What do you all think? Should i give it more miles and then recheck alignment?

FYI the rear camber was -3/-2.9 before adjusting.

You need to give them time to settle.

abgyak · 06-09-2011, 09:54 PM

So i finally got my swift springs after nearly 2 months andbwill be installing today.. So is this how to mount them with the rubber silencer at the bottom of the suspension housing?

Ron · 06-09-2011, 10:08 PM

I think your spring is backwards, the part where the turns are closer together should go on the top.

AlphaSnacks · 06-09-2011, 10:39 PM

Quote:

Originally Posted by abgyak

So i finally got my swift springs after nearly 2 months andbwill be installing today.. So is this how to mount them with the rubber silencer at the bottom of the suspension housing?

Mubaarak Hashim's Photos | Facebook

Where did you order from?

abgyak · 06-09-2011, 10:54 PM

Got it from Kami... Ordered them back in April.... Btw can anyone confirm if the springs installed is upside down.. Cause the mechanic where i sent the springs insisted that its installed as shown in the picture below..

But according to JJ-Nismo in post 219 its the other way round... So which one is the correct way? Please confirm guys... Thanks..

Quote:

Originally Posted by JJ-NISMO

I took some pictures of my springs this morning. The car was on the ground and the springs were not unloaded. It appears that the isolators are in place. I also notice what may be the silencer in the upper middle portion of the springs.

Take a look and let me know what you think! Do the springs look too compressed? What about the shocks?

Front Passenger's Side-- first two pics
Front Driver's Side-- second two pics

wheee! · 06-10-2011, 09:09 AM

Tighter coils to the top! You should be able to read the Swift logo on the springs! Make the garage reinstall those ASAP.

abgyak · 06-10-2011, 09:47 AM

I havent corrected the installation of springs yet, was waiting for confirmation from you guys... will probably make the changes tomorrow... BTW was just wondering, what would be the consequences if i keep the springs installed upside down?

btw here's the result:

Before:

After:

Before:

After:

06-06-2011, 05:14 PM	#680 (permalink)
ZoomtoZ Base Member Join Date: May 2009 Location: Ohio Posts: 46 Drives: 09 370Z PG A7 T/S Rep Power: 16	Had my Swifts installed and aligned the same day (didn't plan on alignment at the same time but I gave in). Here are my results after alignment Front L/R -1.4/-1.3 Camber 5.7/5.6 Caster .08/.09 Toe Rear L/R -2.6/-2.2 Camber .12/.12 Toe I guess i will have to get Rear camber arms later on but i don't think the rears are too bad. I'm looking to get in spec and not looking for any other advantages. If L/R rears were closer maybe i would just left them alone... What do you all think? Should i give it more miles and then recheck alignment? FYI the rear camber was -3/-2.9 before adjusting. __________________ 09 PG 370z AT Sport, Touring 30% Window Tint, Clear Bra, Kenwood DNX7140 w/rearcam, Injen Intakes, MR Works Headlight mods, Carbon fiber fang cover, Berk CBE.

06-06-2011, 06:26 PM	#681 (permalink)
Mandingo Track Member Join Date: Nov 2010 Location: Dallas Posts: 625 Drives: '10 370z 6spd Rep Power: 3371	I would wait a week or 2 and get it realigned but thats just me. Can't wait for my springs to come in! __________________ some mods

06-06-2011, 06:35 PM	#682 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 45 Posts: 4,855 Drives: to acquire tickets Rep Power: 3525	I have heard drive on them for roughly 500 miles then align. __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

06-09-2011, 09:54 PM	#685 (permalink)
abgyak Enthusiast Member Join Date: Oct 2009 Location: Brunei Darussalam Posts: 378 Drives: 370z - 260z - 280zx Rep Power: 16	So i finally got my swift springs after nearly 2 months andbwill be installing today.. So is this how to mount them with the rubber silencer at the bottom of the suspension housing? __________________ Brunei Darussalam: Abode Of Peace Last edited by abgyak; 06-10-2011 at 09:41 AM.

06-10-2011, 09:09 AM	#689 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 58 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	Tighter coils to the top! You should be able to read the Swift logo on the springs! Make the garage reinstall those ASAP. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

06-02-2011, 04:58 PM	#676 (permalink)
AlphaSnacks A True Z Fanatic Join Date: Jan 2010 Location: Windermere, FL Posts: 1,618 Drives: '13 XKR-S, '10 370Z Rep Power: 19	Someone sell me your Swifts. I can't wait for my order anymore. Been over a month and I'm tired of driving the car with OEM springs. PM me if you're selling. I'm totally serious.

06-06-2011, 07:36 PM	#683 (permalink)
BRI888 Base Member Join Date: Jun 2011 Location: CALIFORNIA Posts: 26 Drives: 2011 370Z SPORT Rep Power: 14	What model is that swift springs? How much is it? Is the ride bumpy?

06-09-2011, 10:08 PM	#686 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 22	I think your spring is backwards, the part where the turns are closer together should go on the top.

06-10-2011, 09:47 AM	#690 (permalink)
abgyak Enthusiast Member Join Date: Oct 2009 Location: Brunei Darussalam Posts: 378 Drives: 370z - 260z - 280zx Rep Power: 16	I havent corrected the installation of springs yet, was waiting for confirmation from you guys... will probably make the changes tomorrow... BTW was just wondering, what would be the consequences if i keep the springs installed upside down? btw here's the result: Before: After: Before: After: __________________ Brunei Darussalam: Abode Of Peace Last edited by abgyak; 06-10-2011 at 09:49 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift Springs-- Nismo Review!!	JJ-NISMO	Brakes & Suspension	39	07-29-2014 08:59 AM
[WTB] Swift Springs	Beastmode	Parts for sale (Private Classifieds)	1	09-13-2011 05:46 PM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 11:46 AM
WTB: Swift or H&R Springs	Mr&Mrs	Wanted	5	04-26-2011 11:51 PM
Swift Springs	Justin1686	North East Region	10	02-24-2011 07:58 PM