Swift springs review!!!!!

czheng51 · 06-01-2011, 12:50 AM

Quote:

Originally Posted by Ron

That's 2 in a row brother, search. Kami is a vendor here and they are mentioned all over this thread.

SWIFT Spec-R Springs: Pre-Order Before Its too late!!!

yeah i saw the post about the website but i just want to make sure its a authorized vendor so my springs are guaranteed to be legit and not fake

Ron · 06-01-2011, 12:51 AM

... They are

czheng51 · 06-01-2011, 12:53 AM

Quote:

Originally Posted by Ron

... They are

ok thanks bro

tjlazer · 06-01-2011, 01:18 AM

Quote:

Originally Posted by ArtK

I just ordered my Swift springs, waiting impatiently for them to come in now.

It appears that there is quite a diverse opinion on whether or not to add a camber and toe kit for the front and rear of the Z once the swift springs are installed. I read through the majority, probably half of, the 44 pages and quite a few of you say no camber or toe is necessary to make proper adjustments the other half say yes. So my question is if I am putting on 20" wheels, and I'm sure many of you have already learned trial an error, should i put camber and toe adjustments on, and which brand is recommended. My Z is not a daily driver but when I do drive it I want to be able to drive without worrying about screwing up a $500 tire, or when I bring it to the track not have the car perform properly.
Not sure what to do?????

The deal is all 370Z's are not the same and some tolerate a drop better than others. You will just have to install, then get an alignment and see where you are at.

I was one of the lucky ones. No camber kits at all. -1.4 front and -1.9 rears.

KamiSpeed · 06-01-2011, 11:28 AM

Quote:

Originally Posted by tjlazer

The deal is all 370Z's are not the same and some tolerate a drop better than others. You will just have to install, then get an alignment and see where you are at.

I was one of the lucky ones. No camber kits at all. -1.4 front and -1.9 rears.

ditto

but from all the sets I've sold (50+ springs) I've had majority not need the camber kit so chances are you won't either

Alchemy · 06-01-2011, 12:58 PM

When is this shipment of springs gettin in KAMISPEED??? Thought eta was end of May???

KamiSpeed · 06-01-2011, 01:10 PM

Quote:

Originally Posted by Alchemy

When is this shipment of springs gettin in KAMISPEED??? Thought eta was end of May???

Swift said their shipment has been delayed by a week or two... nothing I can do, I'm actually in the process of updating all our customers on the delay

Alchemy · 06-01-2011, 01:21 PM

Quote:

Originally Posted by KamiSpeed

Swift said their shipment has been delayed by a week or two... nothing I can do, I'm actually in the process of updating all our customers on the delay

Lol, yeah just got the call. Not good news, been waiting on these awhile but what ya gonna do.

KamiSpeed · 06-01-2011, 01:43 PM

Quote:

Originally Posted by Alchemy

Lol, yeah just got the call. Not good news, been waiting on these awhile but what ya gonna do.

yea there's not much we can do... this is a problem from the supplier

stells370 · 06-01-2011, 03:39 PM

hey guys im going with swifts in the near future and was wondering what spacers you guys would recommend. im on stock sport 19s with 275/30s up front and 305/30s in the rear thanks in andvance

wheee! · 06-01-2011, 04:57 PM

15's and 20's.....

tjlazer · 06-01-2011, 05:03 PM

Quote:

Originally Posted by stells370

hey guys im going with swifts in the near future and was wondering what spacers you guys would recommend. im on stock sport 19s with 275/30s up front and 305/30s in the rear thanks in andvance

If you want to go the easy route and do it yourself, get 20mm front and back, then get the type 2 that you bolt on without removing the studs. That way you can easily remove them yourself if you get new wheels later on! You need 20mm up front as the front wheels will not fit with 15mm unless you install longer studs...

camposturtle · 06-02-2011, 08:45 AM

Here is a pic of my car with the Swift Springs install.

Red__Zed · 06-02-2011, 08:46 AM

Quote:

Originally Posted by camposturtle

Here is a pic of my car with the Swift Springs install.

great stance, and great shot!

stells370 · 06-02-2011, 03:45 PM

Quote:

Originally Posted by wheee!

15's and 20's.....

dont think i will rub up front with the 275's ? id love to do the 15/20 combo just dont want any rubbing

06-01-2011, 12:58 PM	#666 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 45 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	When is this shipment of springs gettin in KAMISPEED??? Thought eta was end of May??? __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

06-01-2011, 04:57 PM	#671 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 58 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	15's and 20's..... __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift Springs-- Nismo Review!!	JJ-NISMO	Brakes & Suspension	39	07-29-2014 08:59 AM
[WTB] Swift Springs	Beastmode	Parts for sale (Private Classifieds)	1	09-13-2011 05:46 PM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 11:46 AM
WTB: Swift or H&R Springs	Mr&Mrs	Wanted	5	04-26-2011 11:51 PM
Swift Springs	Justin1686	North East Region	10	02-24-2011 07:58 PM

06-01-2011, 12:51 AM	#662 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 22	... They are

06-01-2011, 03:39 PM	#670 (permalink)
stells370 Enthusiast Member Join Date: Mar 2011 Location: Jennings, la Posts: 262 Drives: 09 370z pw Rep Power: 14	hey guys im going with swifts in the near future and was wondering what spacers you guys would recommend. im on stock sport 19s with 275/30s up front and 305/30s in the rear thanks in andvance