Swift springs review!!!!!

ZForce · 04-11-2011, 01:01 PM

Quote:

Originally Posted by Ron

Sure do, they got here Friday and are already installed

While I was in there I installed spacers and camber arms. I'm letting the springs settle and will take it for alignment next weekend... Anyone knows of a good alignment shop in Houston?

Lucky you and I heard you sprung for control arms. Be interested in seeing your before and after alignment printout. Seems no one ever posts these up anymore.

Ron · 04-11-2011, 01:30 PM

Front does not look that bad. I think I did a good job calculating the length of the arms. Rear is another story though, I can tell just by glancing that there's difference on camber between the 2 wheels. Rear camber is already adjustable on stock arms and having an extra adjusting point on the spc arms just makes it harder to calculate. I could have done a better job by being more careful, measuring and marking but it was 2am and I wanted to get it done haha. I will post my sheets once I get the aligment done.

KamiSpeed · 04-11-2011, 03:45 PM

anyone looking for 370z springs there is one last set left, PM me

ZForce · 04-11-2011, 05:14 PM

^ get em while they last (and not for long).

Saku, did you see my question a couple of posts back? Thanks!

DIGItonium · 04-11-2011, 05:41 PM

Man I called just in time as the tech barely put the first spring on. I told him about the OEM sleeve that needs to move over to the new spring. Phew! Stinks I won't get to see my car done until sometime tomorrow (been almost a month without the Z).

I'm crossing my fingers the new tires will work out, and hopefully I can get away without a camber kit for a short while. We'll see how alignment goes tomorrow.

KamiSpeed · 04-11-2011, 05:44 PM

Quote:

Originally Posted by ZForce

^ get em while they last (and not for long).

Saku, did you see my question a couple of posts back? Thanks!

Haha you have a lot of posts do you have the particular post number?

sstevens7 · 04-11-2011, 08:34 PM

Quote:

Originally Posted by KamiSpeed

you bought through us? if so then its something that always happens with USPS, they seem to not update the tracking until the item arrives haha

Yes I bought them through you. I just received them in the mail yesterday. Not a bad turn around at all! Thanks. Now for the install...hopefully soon.

bigdog1250 · 04-11-2011, 09:25 PM

Quote:

Originally Posted by DIGItonium

Man I called just in time as the tech barely put the first spring on. I told him about the OEM sleeve that needs to move over to the new spring. Phew! Stinks I won't get to see my car done until sometime tomorrow (been almost a month without the Z).

I'm crossing my fingers the new tires will work out, and hopefully I can get away without a camber kit for a short while. We'll see how alignment goes tomorrow.

What OEM sleeve? Please enlighten me, I plan installing the springs/spacers this weekend myself.

Baer383 · 04-11-2011, 10:00 PM

Quote:

Originally Posted by bigdog1250

What OEM sleeve? Please enlighten me, I plan installing the springs/spacers this weekend myself.

He is talking about the thin rubber that goes on the spring side to keep the coils from contacting each other.

And the factory put the front ones on the bottom to keep the spring from rubbing on the strut.

Ron · 04-11-2011, 10:09 PM

Baer I did about 25miles today on the springs. Rear wheel gap is gone but the front is still there. There's like 1.5 - 2 inches between the tire and the fender. Is it supposed to be like that? From the pics I've seen I'm guessing (hoping) they will settle more

Baer383 · 04-11-2011, 10:15 PM

Quote:

Originally Posted by Ron

Baer I did about 25miles today on the springs. Rear wheel gap is gone but the front is still there. There's like 1.5 - 2 inches between the tire and the fender. Is it supposed to be like that?

I just measured mine ,and it's pretty low I have .75in all the way around.

You may want to check your control arms.

Did you load the suspension when you tightened everything up?

tsolin01 · 04-11-2011, 11:20 PM

Just got mine installed today and the drop so far looks like an inch all around. The springs did come with instructions to use the oem sleeve on the new springs and it even had a photocopy of what it should look like. As long as your installer sees that it should be fine.

I can definitely see some noticeable negative camber so I'm planning to get an alignment in a couple weeks. I suspect with the amount of driving I do, the springs will probably settle in by tomorrow lol.

So far it doesn't look like I'll have any rubbing issues with 19x9.5 +30 front with 245/40 tires and 19x10.5 +8 rear with 285/35 tires. Only issue I have now is scraping on my driveway lol

Edit: Oh yea btw, the ride on these is very similar to stock and not harsh at all. Also feels like it absorbs road imperfections better and not as bouncy. I got these mainly for the drop so any performance improvements is icing on the cake.

ZForce · 04-12-2011, 02:55 AM

Quote:

Originally Posted by ZForce

.........@Kamispeed, I have heard different feedback on the break in period before getting an alignment. Do you need some miles (100 miles) on the springs before an alignment or not?

Quote:

Originally Posted by ZForce

........
Saku, did you see my question a couple of posts back? Thanks!

Quote:

Originally Posted by KamiSpeed

Haha you have a lot of posts do you have the particular post number?

Here ya go Saku....haha

ZForce · 04-12-2011, 03:10 AM

Sounds like there is some initial driving required to get the springs to settle.

Ron, sounds like you went the string and srting bubble level toi get the initial alignment...props...you have more patience than me.

Digitonium and Baer383, thanks for the reminder about the OEM sleeve. There is a pic posted earlier on this thread or maybe the other thread. Glad Swift is including a cheat sheet in the box. Digi...what tire did you go with and sizes?

tsolin01, thanks for the feedback and tire sizes, this will help me in deciding which size to go with.

bigdog1250, I will get the alignment sheets over to you before the weekend.

My order is due on Weds.

Ron · 04-12-2011, 07:21 AM

Quote:

Originally Posted by Baer383

I just measured mine ,and it's pretty low I have .75in all the way around.

You may want to check your control arms.

Did you load the suspension when you tightened everything up?

Crap I didn't. So, take the wheels off, loosen the camber arm bolts, raise the susp with a floor jack and then tighten the camber arm bolts. Right? How much should I raise it, until shock and spring are fully compressed?

04-11-2011, 03:45 PM	#378 (permalink)
KamiSpeed A True Z Fanatic Join Date: Feb 2011 Location: Orlando, FL Posts: 5,888 Drives: 09 370z Rep Power: 25	anyone looking for 370z springs there is one last set left, PM me __________________ KAMISPEED \| SHOP 370Z PERFORMANCE PARTS & MODS \| SUPPORT@KAMISPEED.COM KAMI SPEED REVIEWS \| FINANCE YOUR PARTS WITH US \| MILITARY & FIRST RESPONDERS PRE-ORDER DEPOSIT PROGRAM \| HKS MASTER SELLER

04-11-2011, 05:41 PM	#380 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Man I called just in time as the tech barely put the first spring on. I told him about the OEM sleeve that needs to move over to the new spring. Phew! Stinks I won't get to see my car done until sometime tomorrow (been almost a month without the Z). I'm crossing my fingers the new tires will work out, and hopefully I can get away without a camber kit for a short while. We'll see how alignment goes tomorrow. __________________

04-11-2011, 10:09 PM	#385 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 22	Baer I did about 25miles today on the springs. Rear wheel gap is gone but the front is still there. There's like 1.5 - 2 inches between the tire and the fender. Is it supposed to be like that? From the pics I've seen I'm guessing (hoping) they will settle more Last edited by Ron; 04-11-2011 at 10:14 PM.

04-11-2011, 11:20 PM	#387 (permalink)
tsolin01 Track Member Join Date: Feb 2010 Location: Dallas, TX Posts: 657 Drives: 2010 370Z Rep Power: 16	Just got mine installed today and the drop so far looks like an inch all around. The springs did come with instructions to use the oem sleeve on the new springs and it even had a photocopy of what it should look like. As long as your installer sees that it should be fine. I can definitely see some noticeable negative camber so I'm planning to get an alignment in a couple weeks. I suspect with the amount of driving I do, the springs will probably settle in by tomorrow lol. So far it doesn't look like I'll have any rubbing issues with 19x9.5 +30 front with 245/40 tires and 19x10.5 +8 rear with 285/35 tires. Only issue I have now is scraping on my driveway lol Edit: Oh yea btw, the ride on these is very similar to stock and not harsh at all. Also feels like it absorbs road imperfections better and not as bouncy. I got these mainly for the drop so any performance improvements is icing on the cake. __________________ SOLD 12/30/2011 2010 370Z Coupe Monterey Blue 6MT/Touring/Sport/Nav F.I. CBE CF w/ 12" Res \| V1 \| SecondSkin \| Stillen G3 \| EVO-R CF B-Pillars \| Volk GT-S Ti Gunmetal 19x9.5 +30 F, 19x10.5 +8 R \| Swift Spec-R Springs Last edited by tsolin01; 04-11-2011 at 11:26 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift Springs-- Nismo Review!!	JJ-NISMO	Brakes & Suspension	39	07-29-2014 08:59 AM
[WTB] Swift Springs	Beastmode	Parts for sale (Private Classifieds)	1	09-13-2011 05:46 PM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 11:46 AM
WTB: Swift or H&R Springs	Mr&Mrs	Wanted	5	04-26-2011 11:51 PM
Swift Springs	Justin1686	North East Region	10	02-24-2011 07:58 PM

04-11-2011, 01:30 PM	#377 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 22	Front does not look that bad. I think I did a good job calculating the length of the arms. Rear is another story though, I can tell just by glancing that there's difference on camber between the 2 wheels. Rear camber is already adjustable on stock arms and having an extra adjusting point on the spc arms just makes it harder to calculate. I could have done a better job by being more careful, measuring and marking but it was 2am and I wanted to get it done haha. I will post my sheets once I get the aligment done.

04-11-2011, 05:14 PM	#379 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	^ get em while they last (and not for long). Saku, did you see my question a couple of posts back? Thanks!

04-12-2011, 03:10 AM	#389 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	Sounds like there is some initial driving required to get the springs to settle. Ron, sounds like you went the string and srting bubble level toi get the initial alignment...props...you have more patience than me. Digitonium and Baer383, thanks for the reminder about the OEM sleeve. There is a pic posted earlier on this thread or maybe the other thread. Glad Swift is including a cheat sheet in the box. Digi...what tire did you go with and sizes? tsolin01, thanks for the feedback and tire sizes, this will help me in deciding which size to go with. bigdog1250, I will get the alignment sheets over to you before the weekend. My order is due on Weds.