Swift springs review!!!!!

abgyak · 04-13-2011, 12:13 PM

Just to be on the save side im thinking of getting some front & rear camber kit for the swift spring i'll be installing once they arrived. Was wondering who's out there selling the SPC front & rear kit with a good offer?

Ron · 04-13-2011, 10:51 PM

Quote:

Originally Posted by abgyak

Just to be on the save side im thinking of getting some front & rear camber kit for the swift spring i'll be installing once they arrived. Was wondering who's out there selling the SPC front & rear kit with a good offer?

THMotorsoports has them for 509 shipped. Other sellers have the fronts for 365 and rears for 180, aprox.

Edit: THM exclusive: SPC full camber kits available! Save your tires!

tsolin01 · 04-13-2011, 11:33 PM

Btw DIGItonium, whenever you get that INGS+1 kit on, can you measure how low it ends up being to the ground. I'm planning to get it eventually but wanna see how much I would scrape it up.

Those little rubber flaps in front of the tires are about 2 inches from the ground now and the sport pkg front diffuser is about 3 inches and they scrape on my driveway lol

My FI exhaust cans are now 3.5 inches from the ground and haven't scraped them yet... And on second look today, the rear camber does look like it's in the -2 degree range. I probably won't end up getting a camber kit and just live with the tire wear since it doesn't look like the wear would be much better with a 1 degree difference. We'll see how it goes after my alignment next week.

bigdog1250 · 04-13-2011, 12:15 PM

My springs came in last night, YES, going to install them on saturday.

ZForce · 04-14-2011, 01:06 AM

Oh.....my Swift springs came in today...woot...woot!

Krankin450r · 04-14-2011, 05:19 AM

Don't want to be redundant but just to clarify~ I should receive my swift's along with H&R spacers (15mm front, 20mm rear) on Monday according to FedEx.. Based on what I've read I'll more than likely need a rear camber kit but should be close enough to OEM specs with the front? Thanks to all you guys this thread has been amazing.

ZForce · 04-15-2011, 04:22 PM

Quote:

Originally Posted by Krankin450r

Don't want to be redundant but just to clarify~ I should receive my swift's along with H&R spacers (15mm front, 20mm rear) on Monday according to FedEx.. Based on what I've read I'll more than likely need a rear camber kit but should be close enough to OEM specs with the front? Thanks to all you guys this thread has been amazing.

Should be ok with just rear camber kit.....dont forget to get from NICK at THMotorsports the TOE bolts....Everyone will def need them.

As far as an Upper Control Arm, I am hoping not. I am currently on Eibachs 0.09 drop Fr on stocker tire 245/40 and I am at -1.5 & -1.6 which is at the far end of OEM spec actually it's a mm out of range but that is the setup I wanted to keep the rear camber setting.

I will def post up my alignment spec sheet once I get the alignment done with my new Swift springs.

bigdog1250 · 04-15-2011, 04:53 PM

Quote:

Originally Posted by ZForce

Should be ok with just rear camber kit.....dont forget to get from NICK at THMotorsports the TOE bolts....Everyone will def need them.

As far as an Upper Control Arm, I am hoping not. I am currently on Eibachs 0.09 drop Fr on stocker tire 245/40 and I am at -1.5 & -1.6 which is at the far end of OEM spec actually it's a mm out of range but that is the setup I wanted to keep the rear camber setting.

I will def post up my alignment spec sheet once I get the alignment done with my new Swift springs.

What are the Toe Bolts for? I'm going to hold off on getting a Rear Camber kit as of just yet, what to see how the alignment goes first. I have the spacers and the springs and will be installing them late tonight or tomorrow morning. Pics of a Sexy 40th coming up!

DIGItonium · 04-14-2011, 08:05 AM

Quote:

Originally Posted by tsolin01

Btw DIGItonium, whenever you get that INGS+1 kit on, can you measure how low it ends up being to the ground. I'm planning to get it eventually but wanna see how much I would scrape it up.

Sure thing, I dropped the bumper last night and test fitted the lip. I'm not exactly sure how the 3 screws fasten the lip to the bumper so I'm going to improvise by using locking washers and rubber washers through the holes for the OEM aero deflector.

After a day the springs settled some more and the camber changed a bit more. With the 305 tires, it seems like the strongest contact is on the inner half of the tire. It needs to be adjusted some more, so I'm probably going to get the camber kit and alignment done once the car gets shipped over to Baker in June.

Quote:

Originally Posted by ZForce

That looks so good, sounds like a rear camber kit is all that is needed. Good to hear about the fronts at -1.6 & -1.5, that is about where I am with Eibachs and stock tires. I just finished looking at America's Tire Calculator and just punched in the 285/30/19 & 255/35/19 then read your above opinion on 285/30/19 and scraping on the driveway....ouch..looks like I will be looking for a taller tire both Fr & Rr. Yours does look perfect with 275/35 & 305/30. I have spacers so your setup will not work with mine...sigh.

I want more contact patch so the camber kit is definitely needed. Hopefully the SPCs offer caster adjustments as well. Yup, although the 275/35 up front is wider, it is still a tiny bit shorter than the 245/40. The 305/30 is definitely a tad shorter than 275/35 for the rear, but it is nowhere near as bad as 285/30 (poor recommendation). Trust me, I've posted in numerous threads and got scatterbrained over it. So far I'm happy with this decision, but I have only driven less than 10 mi. since I got the car back. The bumper and headlights are off so I'm going to be without the Z for awhile longer.

Here are some daytime pictures as the springs has settled a little bit more. The formula silver wheels contrast the gunmetal wheels off of tsolin01's car.

Ron · 04-15-2011, 02:24 PM

Quote:

Originally Posted by DIGItonium

...I want more contact patch so the camber kit is definitely needed. Hopefully the SPCs offer caster adjustments as well...

Yes, SPC front arms offer caster adjustment

ZForce · 04-15-2011, 04:13 PM

Quote:

Originally Posted by DIGItonium

I want more contact patch so the camber kit is definitely needed. Hopefully the SPCs offer caster adjustments as well. Yup, although the 275/35 up front is wider, it is still a tiny bit shorter than the 245/40. The 305/30 is definitely a tad shorter than 275/35 for the rear, but it is nowhere near as bad as 285/30 (poor recommendation). Trust me, I've posted in numerous threads and got scatterbrained over it. So far I'm happy with this decision, but I have only driven less than 10 mi. since I got the car back. The bumper and headlights are off so I'm going to be without the Z for awhile longer.

Here are some daytime pictures as the springs has settled a little bit more. The formula silver wheels contrast the gunmetal wheels off of tsolin01's car.

Thanks for your feedback and I do trust you on not recommending the 285/30 Rr. I cannot afford to go any wider in the rear than 285/35 with my buldging 25mm spacers. And the fronts, well this time around I think I am better off with the taller stockers 245/40 for fear of sticking out too far with my 20mm spacers and most important fear of scraping up the driveway. I have the sport package +touring which comes with the lower black rubber splash guard as I call it and the front facing mud flaps..haha. They already scrape occassionaly but never has it scraped the bumber itself. I have always loved your wheels from day one. That would be one of my fisrt choices to go with my PG.

SPC Upper Coontrol Arms do have caster adjustment.....BUT....when I had them on my 350Z it was a trade off for camber...meaning if I wanted to be in OEM spec that the caster was going to be more on the forward slant...meaning high speed instalbility...which I never felt any instability at 100 + mph...but not driving at thoses speeds for any substained amount of time.

LunaZ · 04-14-2011, 09:03 AM

Sounds like I should just go ahead and order the rear camber arms and pop 'em in while I'm doing the spring install.

ScottmanZ · 04-15-2011, 02:06 PM

My Swift springs will arrive today! Looking forward to getting them installed on my 40th this weekend. I put 15mm spacers all around last weekend and realized I really need a drop too

KamiSpeed · 04-15-2011, 02:27 PM

anyone need spc parts I can also get that for you

coaster · 04-15-2011, 04:23 PM

Woohoo, just got my springs today. I am hoping to get everything installed as soon as I get my H&R spacers for the front!

04-13-2011, 12:13 PM	#1 (permalink)
abgyak Enthusiast Member Join Date: Oct 2009 Location: Brunei Darussalam Posts: 378 Drives: 370z - 260z - 280zx Rep Power: 16	Just to be on the save side im thinking of getting some front & rear camber kit for the swift spring i'll be installing once they arrived. Was wondering who's out there selling the SPC front & rear kit with a good offer? __________________ Brunei Darussalam: Abode Of Peace

04-13-2011, 11:33 PM	#3 (permalink)
tsolin01 Track Member Join Date: Feb 2010 Location: Dallas, TX Posts: 657 Drives: 2010 370Z Rep Power: 17	Btw DIGItonium, whenever you get that INGS+1 kit on, can you measure how low it ends up being to the ground. I'm planning to get it eventually but wanna see how much I would scrape it up. Those little rubber flaps in front of the tires are about 2 inches from the ground now and the sport pkg front diffuser is about 3 inches and they scrape on my driveway lol My FI exhaust cans are now 3.5 inches from the ground and haven't scraped them yet... And on second look today, the rear camber does look like it's in the -2 degree range. I probably won't end up getting a camber kit and just live with the tire wear since it doesn't look like the wear would be much better with a 1 degree difference. We'll see how it goes after my alignment next week. __________________ SOLD 12/30/2011 2010 370Z Coupe Monterey Blue 6MT/Touring/Sport/Nav F.I. CBE CF w/ 12" Res \| V1 \| SecondSkin \| Stillen G3 \| EVO-R CF B-Pillars \| Volk GT-S Ti Gunmetal 19x9.5 +30 F, 19x10.5 +8 R \| Swift Spec-R Springs

04-13-2011, 12:15 PM	#4 (permalink)
bigdog1250 Track Member Join Date: Nov 2008 Location: San Francisco Posts: 846 Drives: 991.2 GT3 Rep Power: 18	My springs came in last night, YES, going to install them on saturday. __________________ 350z / 40th 370z / C6 Z06 / BMW M4 / V10 R8 / C7 Grand Spot / 997.1 GT3 / S2K / Camaro ZL1 / 718 GTS / 991.2 GT3

04-14-2011, 05:19 AM	#6 (permalink)
Krankin450r Base Member Join Date: Jul 2009 Location: Limerick, Maine Posts: 42 Drives: 09 Nissan 370z (blk) Rep Power: 16	Don't want to be redundant but just to clarify~ I should receive my swift's along with H&R spacers (15mm front, 20mm rear) on Monday according to FedEx.. Based on what I've read I'll more than likely need a rear camber kit but should be close enough to OEM specs with the front? Thanks to all you guys this thread has been amazing. __________________ ~Never drive faster than your angel can fly~ 09 Black6spd Sport- Fast Intentions carbon fiber CBE Injen Long tube CAI (black) Swift Spec-R with H&R spacers (15mm front 20mm rear)

04-14-2011, 09:03 AM	#12 (permalink)
LunaZ A True Z Fanatic Join Date: Mar 2010 Location: Vagabond Posts: 6,704 Drives: Project: a white one Rep Power: 513	Sounds like I should just go ahead and order the rear camber arms and pop 'em in while I'm doing the spring install. __________________ 2009 370Z Sport/Touring/Navigation \| see my journal for mods facebook: Be my friend... or not.

04-14-2011, 01:06 AM	#5 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	Oh.....my Swift springs came in today...woot...woot!

04-15-2011, 02:06 PM	#13 (permalink)
ScottmanZ Base Member Join Date: Jan 2011 Location: Minnesota Posts: 26 Drives: 370Z 40th Anniv Rep Power: 15	My Swift springs will arrive today! Looking forward to getting them installed on my 40th this weekend. I put 15mm spacers all around last weekend and realized I really need a drop too

04-15-2011, 02:27 PM	#14 (permalink)
KamiSpeed A True Z Fanatic Join Date: Feb 2011 Location: Orlando, FL Posts: 5,888 Drives: 09 370z Rep Power: 26	anyone need spc parts I can also get that for you __________________ KAMISPEED \| SHOP 370Z PERFORMANCE PARTS & MODS \| SUPPORT@KAMISPEED.COM KAMI SPEED REVIEWS \| FINANCE YOUR PARTS WITH US \| MILITARY & FIRST RESPONDERS PRE-ORDER DEPOSIT PROGRAM \| HKS MASTER SELLER

04-15-2011, 04:23 PM	#15 (permalink)
coaster Base Member Join Date: Dec 2008 Location: San Jose Posts: 249 Drives: 09 370z PW 6MT Rep Power: 17	Woohoo, just got my springs today. I am hoping to get everything installed as soon as I get my H&R spacers for the front! __________________ Cars owned: DC2/AP1/NA2/FG2/Z33/Z34/R35

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift Springs-- Nismo Review!!	JJ-NISMO	Brakes & Suspension	39	07-29-2014 07:59 AM
[WTB] Swift Springs	Beastmode	Parts for sale (Private Classifieds)	1	09-13-2011 04:46 PM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 10:46 AM
WTB: Swift or H&R Springs	Mr&Mrs	Wanted	5	04-26-2011 10:51 PM
Swift Springs	Justin1686	North East Region	10	02-24-2011 06:58 PM