Swift springs review!!!!!

carlitos_370z · 03-11-2014, 03:45 PM

Quote:

Originally Posted by wheee!

I have a real hard time with people saying they can get toe in line with spec with Swifts... That much geometry change will induce toe outside of the spec adjustment of the stock parts. YOU NEED TOE BOLTS! (and camber arms if you want to save your tires)

yesterday I ordered the SPC rear camber arms kit w/toe bolts too complete my suspension setup for now

i dont want to eat my tires lol my car is a DD

onzedge · 03-11-2014, 04:30 PM

I have the SPC camber arms and was able to get the toe-in in spec (barely) without the toe bolts. I am thinking I will likely install the toe bolts anyway in order to have greater leeway.

Tribalpinoy91 · 03-11-2014, 11:54 PM

To get in spec bare minimum required are the camber arms?

Huck · 03-12-2014, 12:55 AM

I got my wheels back in spec without any other suspension mods, but its not that often that happens.

Zdayz 2014!!

HngNgn19 · 03-12-2014, 03:52 AM

So...got my Swift Springs installed today! unfortunately... they didn't remove the front rubber insulator and place it on the Swifts. Man I even told the guy he needed to remove the rubber insulator and put it on the new Swift Springs, and there's a sheet of instructions tell the installer to move the rubber insulators over to the Swifts. Got home, opened up the Swift box with the oem springs and there they were, the rubber insulators!!!!!! The ride was perfectly fine, no metal on metal noise or anything strange but I think I'm going to call them up tomorrow and ask them to redo, I don't want some creaking noise or what not down the road. So excited yet so disappointed by the job.

carlitos_370z · 03-12-2014, 08:20 AM

Quote:

Originally Posted by HngNgn19

So...got my Swift Springs installed today! unfortunately... they didn't remove the front rubber insulator and place it on the Swifts. Man I even told the guy he needed to remove the rubber insulator and put it on the new Swift Springs, and there's a sheet of instructions tell the installer to move the rubber insulators over to the Swifts. Got home, opened up the Swift box with the oem springs and there they were, the rubber insulators!!!!!! The ride was perfectly fine, no metal on metal noise or anything strange but I think I'm going to call them up tomorrow and ask them to redo, I don't want some creaking noise or what not down the road. So excited yet so disappointed by the job.

Sorry to hear that dude!!!

onzedge · 03-12-2014, 08:44 AM

Quote:

Originally Posted by HngNgn19

So...got my Swift Springs installed today! unfortunately... they didn't remove the front rubber insulator and place it on the Swifts. Man I even told the guy he needed to remove the rubber insulator and put it on the new Swift Springs, and there's a sheet of instructions tell the installer to move the rubber insulators over to the Swifts. Got home, opened up the Swift box with the oem springs and there they were, the rubber insulators!!!!!! The ride was perfectly fine, no metal on metal noise or anything strange but I think I'm going to call them up tomorrow and ask them to redo, I don't want some creaking noise or what not down the road. So excited yet so disappointed by the job.

wackjum · 03-12-2014, 01:54 PM

Speaking of which, do you know where I can get some more rubber insulators? I don't know what they are called and have tried a number of searches under "spring bushing," "spring dampener," etc with no results.

carlitos_370z · 03-12-2014, 03:19 PM

my springs arrive today

now wating for the SPC rear camber kit that they have to arrive this Friday... if they arrive this Friday im going to install everything this weekend

Pnoyz916 · 04-02-2014, 01:56 PM

I have swifts and have same problem. My deriver front sits higher than passenger. Is this normal will it settle down

QUOTE=Cristobal09;1522337]I agree, the ride is definitely rougher. You arent on crack, its the same way for me. But I dont have a Nismo.

I love my swifts but for some reason cannot track down the reason why they make a very slight squeaking noise from inside the cabin on the front springs when im driving real slow and when Im pulling into my driveway. If Im cruising at normal speeds I dont hear a thing. I have had them reinstalled twice, the lower "sleeve" is on there like the instructions said....not a big deal but sort of annoying when driving in parking lots.[/QUOTE]

carlitos_370z · 04-02-2014, 02:47 PM

Well guys i install the Swift Springs already and the SPC rear camber kit... i have to say.... i love this suspension! the car turn a lot better in the corners, the car looks a lot better, and works great for a DD

very recommended

onzedge · 04-02-2014, 05:28 PM

Quote:

Originally Posted by carlitos_370z

Well guys i install the Swift Springs already and the SPC rear camber kit... i have to say.... i love this suspension! the car turn a lot better in the corners, the car looks a lot better, and works great for a DD

very recommended

Add Koni's.

They take the car to a whole new level.

carlitos_370z · 04-03-2014, 08:29 AM

Quote:

Originally Posted by onzedge

Add Koni's.

They take the car to a whole new level.

Thanks for the recommendation big brother

i will doit later

onzedge · 04-03-2014, 08:31 AM

Quote:

Originally Posted by carlitos_370z

Thanks for the recommendation big brother

i will doit later

Call Joe at ZSpeed when you are ready to set up.

carlitos_370z · 04-03-2014, 08:42 AM

Quote:

Originally Posted by onzedge

Call Joe at ZSpeed when you are ready to set up.

Great!! Added to my wish list

Thanks for the help bro!!! you are the best

03-11-2014, 04:30 PM	#1922 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 64 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684736	I have the SPC camber arms and was able to get the toe-in in spec (barely) without the toe bolts. I am thinking I will likely install the toe bolts anyway in order to have greater leeway. carlitos_370z likes this. __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

03-12-2014, 12:55 AM	#1924 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 41 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	I got my wheels back in spec without any other suspension mods, but its not that often that happens. Zdayz 2014!! __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

04-02-2014, 01:56 PM	#1930 (permalink)
Pnoyz916 Base Member Join Date: Feb 2014 Location: California Posts: 182 Drives: 13 370z Sport PW Rep Power: 11	Squeak I have swifts and have same problem. My deriver front sits higher than passenger. Is this normal will it settle down QUOTE=Cristobal09;1522337]I agree, the ride is definitely rougher. You arent on crack, its the same way for me. But I dont have a Nismo. I love my swifts but for some reason cannot track down the reason why they make a very slight squeaking noise from inside the cabin on the front springs when im driving real slow and when Im pulling into my driveway. If Im cruising at normal speeds I dont hear a thing. I have had them reinstalled twice, the lower "sleeve" is on there like the instructions said....not a big deal but sort of annoying when driving in parking lots.[/QUOTE]

04-02-2014, 02:47 PM	#1931 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7586	Well guys i install the Swift Springs already and the SPC rear camber kit... i have to say.... i love this suspension! the car turn a lot better in the corners, the car looks a lot better, and works great for a DD very recommended SterlingDrive likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift Springs-- Nismo Review!!	JJ-NISMO	Brakes & Suspension	39	07-29-2014 08:59 AM
[WTB] Swift Springs	Beastmode	Parts for sale (Private Classifieds)	1	09-13-2011 05:46 PM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 11:46 AM
WTB: Swift or H&R Springs	Mr&Mrs	Wanted	5	04-26-2011 11:51 PM
Swift Springs	Justin1686	North East Region	10	02-24-2011 07:58 PM

03-11-2014, 11:54 PM	#1923 (permalink)
Tribalpinoy91 Track Member Join Date: May 2012 Location: Las Vegas Posts: 607 Drives: 370z PW Rep Power: 14	To get in spec bare minimum required are the camber arms?

03-12-2014, 03:52 AM	#1925 (permalink)
HngNgn19 Base Member Join Date: Jan 2014 Location: San Jose, CA Posts: 157 Drives: 14 370Z Dark Black Rep Power: 11	So...got my Swift Springs installed today! unfortunately... they didn't remove the front rubber insulator and place it on the Swifts. Man I even told the guy he needed to remove the rubber insulator and put it on the new Swift Springs, and there's a sheet of instructions tell the installer to move the rubber insulators over to the Swifts. Got home, opened up the Swift box with the oem springs and there they were, the rubber insulators!!!!!! The ride was perfectly fine, no metal on metal noise or anything strange but I think I'm going to call them up tomorrow and ask them to redo, I don't want some creaking noise or what not down the road. So excited yet so disappointed by the job.

03-12-2014, 01:54 PM	#1928 (permalink)
wackjum Base Member Join Date: Apr 2012 Location: Houston Posts: 89 Drives: 2004 Porsche 911 T Rep Power: 13	Speaking of which, do you know where I can get some more rubber insulators? I don't know what they are called and have tried a number of searches under "spring bushing," "spring dampener," etc with no results.

03-12-2014, 03:19 PM	#1929 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7586	my springs arrive today now wating for the SPC rear camber kit that they have to arrive this Friday... if they arrive this Friday im going to install everything this weekend