Camber kit help?

Jquad · 10-18-2010, 01:04 AM

Quote:

Originally Posted by NewYorkJon34

I have the SPC rear kit + KW V3's, so far so good

The ride is great, but it still looks like I have a tiny bit of negitive camber in the rear.

Are you planning to put any camber arm on the front?

1fast350z · 10-18-2010, 01:43 AM

Go with SPC. Nuff' said.

NewYorkJon34 · 10-18-2010, 09:08 AM

I really don't think I'll need the front camber kit

fuct · 10-18-2010, 09:12 AM

SPL has a front set coming out.......

Three7D · 10-19-2010, 02:09 AM

^^^ Soon I hope?

Jquad · 10-19-2010, 03:29 AM

Quote:

Originally Posted by NewYorkJon34

I really don't think I'll need the front camber kit

did you drill the slot or anything to fit the rear camber?

ArtVandaleigh · 10-19-2010, 08:26 AM

I have the SPC kit on the rear with Eibachs. If you get the toe bolts, you need to enlarge the hole just slightly for more adjustment, but it's not difficult at all.

ChrisSlicks · 10-19-2010, 09:16 AM

Quote:

Originally Posted by 1fast350z

Go with SPC. Nuff' said.

The SPC works but it doesn't hold alignment if you track the car. Fine for the street.

NewYorkJon34 · 10-19-2010, 02:48 PM

Good thing I don't track the car then, lol

fuct · 10-19-2010, 04:29 PM

Quote:

Originally Posted by ChrisSlicks

The SPC works but it doesn't hold alignment if you track the car. Fine for the street.

Im sure they are "fine" on the street, but knowing they DO slip is very disheartening to me.

ChrisSlicks · 10-19-2010, 04:36 PM

Quote:

Originally Posted by fuct

Im sure they are "fine" on the street, but knowing they DO slip is very disheartening to me.

Overtorquing the lock nut helps a bit. The overall design in fine but they should have came up with some kind of anti-slip mechanism.

fuct · 10-19-2010, 04:56 PM

Quote:

Originally Posted by ChrisSlicks

Overtorquing the lock nut helps a bit. The overall design in fine but they should have came up with some kind of anti-slip mechanism.

overtorque it huh, how bout some duct tape too!

naaa not for me. come on SPL!!!!

Jeffblue · 10-19-2010, 04:58 PM

anyone here have any experience with having to re-grease the SPL Kit?

ChrisSlicks · 10-19-2010, 05:27 PM

Quote:

Originally Posted by Jeffblue

anyone here have any experience with having to re-grease the SPL Kit?

As in the upper ball joint? My SPC arms have been in there for a year and I haven't greased anything.

NewYorkJon34 · 10-19-2010, 06:09 PM

I have the spc kit, I'm sure it's just as good as the spl kit.

10-19-2010, 02:09 AM	#20 (permalink)
Three7D Base Member Join Date: Sep 2010 Location: NorCal 707 Posts: 174 Drives: to slow Rep Power: 15	^^^ Soon I hope? __________________ 2010 Mag. Black Base+Sports V-LEDs Amuse Vestito (in a large box in my garage) Volk SF Challenge Gold/Phantom Ed. 10mm ichiba v2 F.I. CF+18" res. + F.I. RTP's

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
what Camber do you run?	ocean.mirage	Brakes & Suspension	3	08-08-2010 10:27 PM
camber kit	CWofRR	Brakes & Suspension	0	07-10-2010 12:42 AM
Camber, Camber...More Camber	SoCal 370Z	The Lounge (Off Topic)	6	06-15-2010 12:55 AM
camber arm or not.	COD4	Brakes & Suspension	0	02-17-2010 10:07 AM

10-18-2010, 01:43 AM	#17 (permalink)
1fast350z Base Member Join Date: Oct 2010 Location: Sacramento, CA Posts: 46 Drives: S2000, G35, 370Z Rep Power: 15	Go with SPC. Nuff' said.

10-18-2010, 09:08 AM	#18 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	I really don't think I'll need the front camber kit

10-18-2010, 09:12 AM	#19 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	SPL has a front set coming out.......

10-19-2010, 08:26 AM	#22 (permalink)
ArtVandaleigh Base Member Join Date: Jan 2009 Location: NE Ohio Posts: 227 Drives: 09 PW 370Z Rep Power: 675	I have the SPC kit on the rear with Eibachs. If you get the toe bolts, you need to enlarge the hole just slightly for more adjustment, but it's not difficult at all.

10-19-2010, 02:48 PM	#24 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	Good thing I don't track the car then, lol

10-19-2010, 04:58 PM	#28 (permalink)
Jeffblue A True Z Fanatic Join Date: Dec 2009 Location: NY Age: 36 Posts: 9,192 Drives: Z32TT & 335xi Coupe Rep Power: 37	anyone here have any experience with having to re-grease the SPL Kit?

10-19-2010, 06:09 PM	#30 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	I have the spc kit, I'm sure it's just as good as the spl kit.