GTSPEC 6 Point Ladder Brace

cinellipro · 03-21-2014, 05:49 PM

The mounting points for the 6-point brace attach to the chassis while the 4-point attaches to the front suspension member. The two braces work in separate and unlinked areas. I investigated the same thing and just ordered the 4-point.

Huck · 03-21-2014, 06:30 PM

Thanks for the info! What were your reasons for going with the 4 and not the 6?

Zdayz 2014!!

cinellipro · 03-21-2014, 09:56 PM

I have the 6-point and the 2-point in the rear. The next step is the 4-point.

Emanwuzhere · 03-22-2014, 02:11 AM

Quote:

Originally Posted by cinellipro

I have the 6-point and the 2-point in the rear. The next step is the 4-point.

What were the specs to the bolts and washers you bought?

I'm also thinking about getting this and want to be prepared for the install.

Sent from my Samsung Galaxy Note 3 using Taptalk

cinellipro · 03-22-2014, 08:23 AM

I reviewed my e-mails with GTSpec and looked for the package and cannot locate the specs on the bolts. I think they were M10x1.25x??mm and automotive grade. I picked up varying lengths at Home Depot and since they were under $3 each it was a good insurance policy from taking multiple trips (returned the unused).
If you want to be prepared for the installation, e-mail GTSpec and ask them to provide you with the bolt specs and then purchase 1/2 in longer bolts. I recommend purchasing 2 longer bolts for the front and 2 longer bolts for the outside. My package did not come with the 2 front bolts, they expect you to use the existing bolts from the chassis.

Huck · 03-23-2014, 11:31 AM

That's good info, thanks man. I'll have to do that when I decode to buy these since they're definitely in my future.

Zdayz 2014!!

nomodsjk · 07-20-2014, 01:34 AM

This thread was very helpful. Thanks guys! I just ordered the 6 point and 2 point. Now I gotta have the 4 point lol

brucelidat · 03-23-2015, 04:34 AM

time for me to resurrect an old thread. Just to sum it up, if you are lowered, these 3 braces will scrape like crazy?

CA_graham · 10-01-2015, 07:40 PM

Added GTSpec 6 point brace to add rigidity to a convertible. Jeffblue has provided good description of install. To add to my experience to the description, the convertible had two small brace section on the left and right that I had to remove to fit the GTSpec brace. I had not noticed these in previous posts. Maybe these are unique to the convertible? These are shown in 1st pic.

GTSpec brace fitted well, captive nuts worked out OK.

I have been having problems with car tracking when crossing uneven surfaces in the road. The 1st drive maybe showed better rigidity. I did not scrape anything, but my car is not lowered. I have not crossed speed bumps yet.

I will update when I have more driving.

Z Runner · 10-09-2015, 12:12 AM

In Puerto Rico 6point brace scrapes on every single speed bump even on the stock height.

zmanelite · 10-09-2015, 12:51 AM

^^^ Yeah mine scrapes on big dips on the freeways in Cali

03-21-2014, 05:49 PM	#61 (permalink)
cinellipro Base Member Join Date: Jan 2012 Location: florida Posts: 102 Drives: 2009 370Z Rep Power: 13	The mounting points for the 6-point brace attach to the chassis while the 4-point attaches to the front suspension member. The two braces work in separate and unlinked areas. I investigated the same thing and just ordered the 4-point. nomodsjk likes this.

03-21-2014, 06:30 PM	#62 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	Thanks for the info! What were your reasons for going with the 4 and not the 6? Zdayz 2014!! __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

03-22-2014, 08:23 AM	#65 (permalink)
cinellipro Base Member Join Date: Jan 2012 Location: florida Posts: 102 Drives: 2009 370Z Rep Power: 13	I reviewed my e-mails with GTSpec and looked for the package and cannot locate the specs on the bolts. I think they were M10x1.25x??mm and automotive grade. I picked up varying lengths at Home Depot and since they were under $3 each it was a good insurance policy from taking multiple trips (returned the unused). If you want to be prepared for the installation, e-mail GTSpec and ask them to provide you with the bolt specs and then purchase 1/2 in longer bolts. I recommend purchasing 2 longer bolts for the front and 2 longer bolts for the outside. My package did not come with the 2 front bolts, they expect you to use the existing bolts from the chassis. nomodsjk likes this.

03-23-2014, 11:31 AM	#66 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	That's good info, thanks man. I'll have to do that when I decode to buy these since they're definitely in my future. Zdayz 2014!! __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

03-23-2015, 04:34 AM	#68 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	time for me to resurrect an old thread. Just to sum it up, if you are lowered, these 3 braces will scrape like crazy? __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

03-21-2014, 09:56 PM	#63 (permalink)
cinellipro Base Member Join Date: Jan 2012 Location: florida Posts: 102 Drives: 2009 370Z Rep Power: 13	I have the 6-point and the 2-point in the rear. The next step is the 4-point.

07-20-2014, 01:34 AM	#67 (permalink)
nomodsjk Premium Member Join Date: Apr 2014 Location: martinsburg wv Posts: 2,073 Drives: 2011 370z MB/7at Rep Power: 19962	This thread was very helpful. Thanks guys! I just ordered the 6 point and 2 point. Now I gotta have the 4 point lol

10-09-2015, 12:12 AM	#70 (permalink)
Z Runner Enthusiast Member Join Date: Sep 2015 Location: Puerto Rico Posts: 332 Drives: 2016 370Z KAD M Base Rep Power: 27	In Puerto Rico 6point brace scrapes on every single speed bump even on the stock height.

10-09-2015, 12:51 AM	#71 (permalink)
zmanelite Track Member Join Date: Nov 2013 Location: Anaheim Posts: 753 Drives: 370 Z Nismo Rep Power: 37	^^^ Yeah mine scrapes on big dips on the freeways in Cali __________________ Instagram @zmanscm

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: GT-SPEC 4-Point Ladder Bar	Equinox	DIY Section (Do-It-Yourself)	7	07-14-2012 06:45 AM
GTSPEC Front 6 Point Subframe Brace Test Vehicle Needed	gtspec-ny	North East Region	11	09-01-2010 11:16 AM
IDIOT Driver Vs. Ladder User	AK370Z	The Lounge (Off Topic)	12	03-08-2010 10:09 PM
DIY: GTSPEC 4-Point Ladder Brace	M.Bonanni	DIY Section (Do-It-Yourself)	8	07-29-2009 02:44 PM