Installation prices. help

Juruki · 09-23-2010, 02:41 PM

So im pretty new to the car modding scene and im about to install coilovers (BC Racing BR) with a SPC camber kit. I got quoted $180 for the coilovers and $80 for the camber kit.
Do the prices sound right?

theDreamer · 09-23-2010, 02:46 PM

Sounds like a good price.

Scott @ RA · 09-23-2010, 04:04 PM

Not a bad price, just be sure someone with experience and knows what they are doing is doing your installs..... It seems like a very easy and fairly straight forward thing to install coilovers and camber arms, for the most part (IMO)... But you would be surprised how many people screw up this install. I mean someone can always just bolt the coilovers up and viola.. there you go.
To do it "right" IMO, the pre-load should always be checked and measured and then duplicated on the other side exactly, The ride height/ shock length needs to be perfectly evenly done and measured from side to side, the same goes for the rear spring perch adjusters, etc. There is a lot of steps that can be taken to ensure THE best results for a coilover installation... Not to even mention corner balancing.

Don't forget about the all important four wheel (laser) alignment after your suspension and ride height are all set, etc.

09-23-2010, 02:41 PM	#1 (permalink)
Juruki Track Member Join Date: Mar 2010 Location: SoCal Posts: 965 Drives: 370Z Tour/Sport/Navi Rep Power: 16	Installation prices. help So im pretty new to the car modding scene and im about to install coilovers (BC Racing BR) with a SPC camber kit. I got quoted $180 for the coilovers and $80 for the camber kit. Do the prices sound right?

09-23-2010, 02:46 PM	#2 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Sounds like a good price. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NISMO Prices	elliotty	Nissan 370Z Pricing / Ordering Discussions	6	10-03-2010 08:29 PM
Leftover '09 prices?	kestrel2	Nissan 370Z Pricing / Ordering Discussions	8	08-26-2010 08:41 PM
Need Help with Invoice Prices Please	Autumn	Nissan 370Z Pricing / Ordering Discussions	12	04-07-2010 03:18 PM
Historical Z Prices	didymus	Nissan 370Z General Discussions	10	07-01-2009 03:46 AM

09-23-2010, 04:04 PM	#3 (permalink)
Scott @ RA Enthusiast Member Join Date: Feb 2010 Location: So Cal Posts: 410 Drives: Ridiculously Fast Rep Power: 15	Not a bad price, just be sure someone with experience and knows what they are doing is doing your installs..... It seems like a very easy and fairly straight forward thing to install coilovers and camber arms, for the most part (IMO)... But you would be surprised how many people screw up this install. I mean someone can always just bolt the coilovers up and viola.. there you go. To do it "right" IMO, the pre-load should always be checked and measured and then duplicated on the other side exactly, The ride height/ shock length needs to be perfectly evenly done and measured from side to side, the same goes for the rear spring perch adjusters, etc. There is a lot of steps that can be taken to ensure THE best results for a coilover installation... Not to even mention corner balancing. Don't forget about the all important four wheel (laser) alignment after your suspension and ride height are all set, etc.