H&r springs & 20/25 spacers

fairladyZ34 · 09-20-2010, 12:32 AM

i ordered H&R springs and the ichiba v2 20mm and 25mm spacers for my car last week. hopefully they ship soon and i get can them installed and enjoy the low life

oh btw i ordered everything from Concept Z Performance. Also do i need the rear cambers arms? i seen people do the install with/ without them

fuct · 09-20-2010, 12:15 PM

yes you will need the camber arms in the back if you want to get teh camber back to stock. you can get it close without the arms, but getting your alignment back to stock should be important to you.

Red__Zed · 09-20-2010, 01:14 PM

The camber will be slightly out of spec if you don't get camber arms. It's up to you if that matters to you. Plenty of people intentionally run more than 2* of camber for various reasons, whether to fit aggressive rims, or to help with corner grip.

Jeffblue · 09-20-2010, 01:24 PM

these are Ztoon's allignment specs after a 1" drop on BC BR coilovers without any camber kit installed.
so i'm guessing thats about as close to stock as you can get it without a kit

^edited thanks to Dan

Jeffblue · 09-20-2010, 01:25 PM

whoa, that came out big.... not sure how to fix that

Red__Zed · 09-20-2010, 01:31 PM

^
here you go.

Jeffblue · 09-20-2010, 01:32 PM

Quote:

Originally Posted by DanGizinski

^
here you go.

cool i'll edit mine so its not huge now and taking up the whole planet

fuct · 09-20-2010, 03:05 PM

your toe will be the worst. i could see tons of black rubber accumulating on the back of my car after my drop. toe was eating the tires bad!

kenchan · 09-20-2010, 03:30 PM

yah, the toe is out of wack on the INITIAL. they did a good job on the final numbers though. zero thrust angle. i likes that too.

fairladyZ34 · 09-20-2010, 10:08 PM

i think im gonna see how it is without the arms, its not my daily driver so i might be okay with the camber not perfect. and increased corner grip would be nice

Jeffblue · 09-20-2010, 10:56 PM

the camber kits aren't that bad really, 250 for the SPL kit

kevin8086 · 10-07-2010, 07:07 AM

any pics yet?

Jeffblue · 10-07-2010, 07:23 AM

Quote:

Originally Posted by kevin8086

any pics yet?

he totaled his z the other day, so he's selling all this stuff.

fairladyZ34 · 10-07-2010, 04:33 PM

^yup, the f'd up part is that my car was supposed to be on jack stands that night for the install in my friends shop but we didnt have room in the shop, then crashed that night

kenchan · 10-07-2010, 05:13 PM

sucks... sorry to hear.

that's a double punch in dissappointment.

09-20-2010, 12:32 AM	#1 (permalink)
fairladyZ34 A True Z Fanatic Join Date: Aug 2009 Location: Central NJ Posts: 1,577 Drives: 08 G37S Black M6 Rep Power: 19	H&r springs & 20/25 spacers i ordered H&R springs and the ichiba v2 20mm and 25mm spacers for my car last week. hopefully they ship soon and i get can them installed and enjoy the low life oh btw i ordered everything from Concept Z Performance. Also do i need the rear cambers arms? i seen people do the install with/ without them __________________ From Z to G to BMW and back to a G! Nismo for life

09-20-2010, 01:24 PM	#4 (permalink)
Jeffblue A True Z Fanatic Join Date: Dec 2009 Location: NY Age: 36 Posts: 9,192 Drives: Z32TT & 335xi Coupe Rep Power: 37	these are Ztoon's allignment specs after a 1" drop on BC BR coilovers without any camber kit installed. so i'm guessing thats about as close to stock as you can get it without a kit ^edited thanks to Dan Last edited by Jeffblue; 09-20-2010 at 01:33 PM.

09-20-2010, 10:08 PM	#10 (permalink)
fairladyZ34 A True Z Fanatic Join Date: Aug 2009 Location: Central NJ Posts: 1,577 Drives: 08 G37S Black M6 Rep Power: 19	i think im gonna see how it is without the arms, its not my daily driver so i might be okay with the camber not perfect. and increased corner grip would be nice __________________ From Z to G to BMW and back to a G! Nismo for life

10-07-2010, 04:33 PM	#14 (permalink)
fairladyZ34 A True Z Fanatic Join Date: Aug 2009 Location: Central NJ Posts: 1,577 Drives: 08 G37S Black M6 Rep Power: 19	^yup, the f'd up part is that my car was supposed to be on jack stands that night for the install in my friends shop but we didnt have room in the shop, then crashed that night __________________ From Z to G to BMW and back to a G! Nismo for life

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eibach Springs & Spacers - Review+Pics	Minicobra1	Brakes & Suspension	128	09-26-2011 01:12 AM
Magnetic Black + H&R Springs + 20mm / 25mm Ichiba spacers	atx370z	Member's 370Z Gallery	43	01-23-2011 12:55 AM
H&R springs, Spacers, Rear Camber Arms installed	HATED1	Brakes & Suspension	42	11-12-2010 09:26 AM
WTB-10mm spacers and H&R lowering springs	onefastz	Wanted	3	08-21-2010 12:46 PM
My PG roadster with springs and spacers	craniac24	Nissan 370Z Photos / Spyshots / Video / Media Gallery	11	04-21-2010 08:56 PM

09-20-2010, 12:15 PM	#2 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	yes you will need the camber arms in the back if you want to get teh camber back to stock. you can get it close without the arms, but getting your alignment back to stock should be important to you.

09-20-2010, 01:14 PM	#3 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120	The camber will be slightly out of spec if you don't get camber arms. It's up to you if that matters to you. Plenty of people intentionally run more than 2* of camber for various reasons, whether to fit aggressive rims, or to help with corner grip.

09-20-2010, 01:25 PM	#5 (permalink)
Jeffblue A True Z Fanatic Join Date: Dec 2009 Location: NY Age: 36 Posts: 9,192 Drives: Z32TT & 335xi Coupe Rep Power: 37	whoa, that came out big.... not sure how to fix that

09-20-2010, 01:31 PM	#6 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120	^ here you go.

09-20-2010, 03:05 PM	#8 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	your toe will be the worst. i could see tons of black rubber accumulating on the back of my car after my drop. toe was eating the tires bad!

09-20-2010, 03:30 PM	#9 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yah, the toe is out of wack on the INITIAL. they did a good job on the final numbers though. zero thrust angle. i likes that too.

09-20-2010, 10:56 PM	#11 (permalink)
Jeffblue A True Z Fanatic Join Date: Dec 2009 Location: NY Age: 36 Posts: 9,192 Drives: Z32TT & 335xi Coupe Rep Power: 37	the camber kits aren't that bad really, 250 for the SPL kit

10-07-2010, 07:07 AM	#12 (permalink)
kevin8086 Base Member Join Date: Oct 2010 Location: Austin Posts: 228 Drives: 09 370Z Sport Rep Power: 15	any pics yet?

10-07-2010, 05:13 PM	#15 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	sucks... sorry to hear. that's a double punch in dissappointment.