Megan Racing Coilover question

crazybeasty · 09-14-2010, 08:56 PM

Ok so today i went to the shop and got my megan racing coilovers installed that i bought from another forum members and there was a slight problem, you see i wanted to lower my car as flush as possible but when the mechanic put the coilovers on, the rear set wouldn't go any lower then about an inch on the other hand the front could still go lower, if i wanted, so i was wondering is it because i have to let the springs settle in the back b4 it can go lower or is it something else. I will post some pics soon also if anyone has the experienced the same problems with their megan coilovers on their Z please comment

weiboy718 · 09-14-2010, 10:38 PM

Quote:

Originally Posted by crazybeasty

Ok so today i went to the shop and got my megan racing coilovers installed that i bought from another forum members and there was a slight problem, you see i wanted to lower my car as flush as possible but when the mechanic put the coilovers on, the rear set wouldn't go any lower then about an inch on the other hand the front could still go lower, if i wanted, so i was wondering is it because i have to let the springs settle in the back b4 it can go lower or is it something else. I will post some pics soon also if anyone has the experienced the same problems with their megan coilovers on their Z please comment

it's probably because the shocks are in different length. look at this picture and do you see the ring on the rear shock? you need to loosen it up and turn the whole shock to raise or lower the car.

ClemsonWill · 09-15-2010, 11:07 AM

It should definitely go lower than an inch. Check and make sure the install was done correctly. If you are not sure post pictures and we can give suggestions.

tjlazer · 09-15-2010, 11:10 AM

From what I understand, you are asking if you max out the front and rear, should the car be level? From what I gather, that is NOT the case. You have to adjust them. Kinda sucks huh. I would of liked it to be at stock or a little higher height maxed out for when you want to go 4X4in.... lol

crazybeasty · 09-15-2010, 02:44 PM

Quote:

Originally Posted by tjlazer

From what I understand, you are asking if you max out the front and rear, should the car be level? From what I gather, that is NOT the case. You have to adjust them. Kinda sucks huh. I would of liked it to be at stock or a little higher height maxed out for when you want to go 4X4in.... lol

no im asking why isnt my rear going lower then an inch even tho i maxed the rear springs all the way and for my fronts they are perfectly normal cuz the mechanic said i could go lower in the front if i wanted too but for the rear he said it couldnt go any lower.

i managed to get some pics for u guys take a look

weiboy718 · 09-15-2010, 03:54 PM

there's another height adjustment on the shock itself. Not just the spring.

azn370z · 09-15-2010, 04:02 PM

I think you installed the springmounts upside down. That is what you use to lower the z, not the shocks.

DIY coilover install

take a look at my last pic of my coilovers.

If I were you I would take it to a shop that knows how to install coilovers that separate the shocks and springs because you're going to have to preload the rears or they will rattle.

crazybeasty · 09-15-2010, 07:07 PM

Quote:

Originally Posted by azn370z

I think you installed the springmounts upside down. That is what you use to lower the z, not the shocks.

DIY coilover install

take a look at my last pic of my coilovers.

If I were you I would take it to a shop that knows how to install coilovers that separate the shocks and springs because you're going to have to preload the rears or they will rattle.

are u sure cuz u do have different coilovers then i do

also how come u dont have this piece in ur pic?

azn370z · 09-15-2010, 07:35 PM

How are you going to adjust the collars when you can't reach it because it's inside the lower metal arm thing? You should remove the top rubber piece, flip your spring and the spring mount around and make sure the rubber piece that sits in the metal pan is still there. I'm pretty sure this is how your megans are supposed to be assembled.

weiboy718 · 09-15-2010, 08:14 PM

i just noticed that, it is installed upside down. the spring collars are suppose to be on top. you gotta remove that rubber and re use the one that was on the bottom.

crazybeasty · 09-15-2010, 09:08 PM

Quote:

Originally Posted by weiboy718

i just noticed that, it is installed upside down. the spring collars are suppose to be on top. you gotta remove that rubber and re use the one that was on the bottom.

ok guys found the problem azn370z was right my springs were upside down check out this memebers thread Megan Racing Coilover shock install and first impressions gonna go back to the shop tomarrow and fix it THX EVERYONE FOR RESPONDING

Jamaica · 09-16-2010, 12:36 AM

shoulda got the KW lol

kevr6 · 09-17-2010, 11:09 PM

Quote:

Originally Posted by weiboy718

i just noticed that, it is installed upside down. the spring collars are suppose to be on top. you gotta remove that rubber and re use the one that was on the bottom.

Bingo!! Boy I don't miss these coilovers!

OMGWTFBBQ · 09-18-2010, 12:49 PM

Quote:

Originally Posted by jamaica951

shoulda got the KW lol

Ding ding ding!! We have a winner!!!

Anyways, I'd suggest never taking your car to the place you installed the coilovers at. Installing the rear spring upside down? Uh.

weiboy718 · 09-19-2010, 08:53 AM

how come my set looks just like those Megan or BC coilovers???

i truely regret selling these

09-14-2010, 08:56 PM	#1 (permalink)
crazybeasty Enthusiast Member Join Date: Mar 2010 Location: West Palm Beach,Florida Posts: 249 Drives: 09 370z Rep Power: 16	Megan Racing Coilover question Ok so today i went to the shop and got my megan racing coilovers installed that i bought from another forum members and there was a slight problem, you see i wanted to lower my car as flush as possible but when the mechanic put the coilovers on, the rear set wouldn't go any lower then about an inch on the other hand the front could still go lower, if i wanted, so i was wondering is it because i have to let the springs settle in the back b4 it can go lower or is it something else. I will post some pics soon also if anyone has the experienced the same problems with their megan coilovers on their Z please comment __________________ "2 Fast To Live, 2 Young To Die" Last edited by crazybeasty; 09-14-2010 at 09:03 PM.

09-15-2010, 11:07 AM	#3 (permalink)
ClemsonWill A True Z Fanatic Join Date: Jul 2010 Location: Charleston, SC Posts: 12,045 Drives: a Civic VP! Rep Power: 445	It should definitely go lower than an inch. Check and make sure the install was done correctly. If you are not sure post pictures and we can give suggestions. __________________ Slightly modded

09-15-2010, 11:10 AM	#4 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 53 Posts: 2,496 Drives: Z34, R35 Rep Power: 20	From what I understand, you are asking if you max out the front and rear, should the car be level? From what I gather, that is NOT the case. You have to adjust them. Kinda sucks huh. I would of liked it to be at stock or a little higher height maxed out for when you want to go 4X4in.... lol __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

09-15-2010, 04:02 PM	#7 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 490	I think you installed the springmounts upside down. That is what you use to lower the z, not the shocks. DIY coilover install take a look at my last pic of my coilovers. If I were you I would take it to a shop that knows how to install coilovers that separate the shocks and springs because you're going to have to preload the rears or they will rattle. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts Last edited by azn370z; 09-15-2010 at 04:15 PM.

09-15-2010, 07:35 PM	#9 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 490	How are you going to adjust the collars when you can't reach it because it's inside the lower metal arm thing? You should remove the top rubber piece, flip your spring and the spring mount around and make sure the rubber piece that sits in the metal pan is still there. I'm pretty sure this is how your megans are supposed to be assembled. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

09-15-2010, 03:54 PM	#6 (permalink)
weiboy718 Track Member Join Date: May 2010 Location: Bay Area Posts: 923 Drives: Infiniti G37 Rep Power: 17	there's another height adjustment on the shock itself. Not just the spring.

09-15-2010, 08:14 PM	#10 (permalink)
weiboy718 Track Member Join Date: May 2010 Location: Bay Area Posts: 923 Drives: Infiniti G37 Rep Power: 17	i just noticed that, it is installed upside down. the spring collars are suppose to be on top. you gotta remove that rubber and re use the one that was on the bottom.

09-16-2010, 12:36 AM	#12 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 74	shoulda got the KW lol

09-19-2010, 08:53 AM	#15 (permalink)
weiboy718 Track Member Join Date: May 2010 Location: Bay Area Posts: 923 Drives: Infiniti G37 Rep Power: 17	how come my set looks just like those Megan or BC coilovers??? i truely regret selling these

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Megan Racing Coilover shock install and first impressions	Phimosis	Brakes & Suspension	88	07-14-2016 03:26 PM
370z Coilover sale Tein, Megan Racing, HKS, KW Variant 3	ERZperformance	Suspension/Brakes	230	06-24-2011 12:57 PM
Cusco, HKS, KSport, KW, Megan Racing, Stance GR+ COILOVER SALE @ ViViD Racing!!!	vividracing	Suspension/Brakes	0	08-08-2010 02:17 PM