|
just make sure to ask for before and after spec prints (every alignment machine i've seen has a printer for this purpose). if they don't provide them, i'd make them
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
06-24-2010, 10:27 PM
|
#26 (permalink) |
|
A True Z Fanatic
Join Date: Apr 2009
Location: Greer, SC
Posts: 14,954
Drives: 06 Frontier SE 6spd
Rep Power: 53    |
just make sure to ask for before and after spec prints (every alignment machine i've seen has a printer for this purpose). if they don't provide them, i'd make them do it again (or at least set it back up to show the settings). make sure that it's right. remember that a .1 or .2* difference on one side isn't going to really effect much and it can be hard to get something dead center and tighten it up without some slight movement. i used to do alignments at the dealership i worked at and it can be really frustrating sometimes
__________________
Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now 
|
|
|
| Bookmarks |
|
|
Threaded Mode
