SWIFT Springs in Production

Philipp · 09-20-2010, 02:45 PM

Wrote to Billy last week. No update yet..

egz · 09-30-2010, 11:46 PM

if there is a group buy im in!

about how much would it cost to have these installed by a shop? and how difficult is a spring install on a touring s?

tjlazer · 10-01-2010, 01:40 AM

Check the DIY:

DIY coilover install

It's about a 6 hour job if you have all the tools. About $200 to $400 for a shop to do it.

egz · 10-01-2010, 10:50 AM

Quote:

Originally Posted by tjlazer

Check the DIY:

DIY coilover install

It's about a 6 hour job if you have all the tools. About $200 to $400 for a shop to do it.

thank you

tjlazer · 10-04-2010, 06:50 PM

Quote:

The drop should be about 1 inch all around.

And the spring rates are 10kg front and 10.5kg rear.

We are not going to be releasing the Sport springs. We are going straight for the Spec R's. They are faily aggressive rates and are going to be very performance oriented. They will be comfortable enough to be daily driven.

They are going to ready in a month and a half.

Thanks for looking into Swift.

Best Regards,
Sales

ok it's October, whats the hold up swift? LOL

XwChriswX · 10-04-2010, 07:25 PM

So based on those #'s ^^^^ Does this mean they will be 'stiffer' than Eibachs...??

And what I'm saying is, I have a sub box in the back with 2x10" + amp... When I had Eibachs, the rear end squatted... So my question is if I had these springs, would it still do so, or are they able to handle the extra 120ish pounds?

tjlazer · 10-04-2010, 07:29 PM

Yes it should not sag as bad as the Eibachs.

XwChriswX · 10-04-2010, 08:03 PM

Hmmm... I might have to shoot Swift a pm and find out if they've seen/dealt with this or not?

tjlazer · 10-04-2010, 10:36 PM

Well I do know that if you get LINEAR springs you will have less of a problem with a load in the back. Maybe get some Nismo springs? They are STIFF as Fvck!

XwChriswX · 10-05-2010, 01:21 AM

Quote:

Originally Posted by tjlazer

Well I do know that if you get LINEAR springs you will have less of a problem with a load in the back. Maybe get some Nismo springs? They are STIFF as Fvck!

Yes, thats what I was told, if I get any progressive spring I'm screwed... I guess I'll just hold out for Coilovers in the spring lol

370ZAttack · 10-07-2010, 02:57 PM

Word is in. They're coming in 2 weeks

According to KamiSpeed, Swift will only have 5 sets left. So you guys need to jump on these.

Red__Zed · 10-07-2010, 03:55 PM

Quote:

Originally Posted by 370ZAttack

Word is in. They're coming in 2 weeks

According to KamiSpeed, Swift will only have 5 sets left. So you guys need to jump on these.

only 5 sets???

tjlazer · 10-11-2010, 05:07 PM

Kami will have 5 sets or Swift???!?

370ZAttack · 10-13-2010, 02:05 PM

Swift were getting a total of 15 sets on this shipment, but 10 sets were all pre-sold. So Kami decided to buy the last 5 sets. Because Swift won't be getting any more for at least 6 more weeks.

So that's why I jumped on the pre-order list. I don't want to wait 2 months for these. Not sure how many Kami have now though.

felt · 10-13-2010, 02:09 PM

You would think that with the amount of demand for these springs have, theyd be capable of producing more.

09-20-2010, 02:45 PM	#121 (permalink)
Philipp Base Member Join Date: May 2009 Location: Montreal Posts: 189 Drives: 370z SP MT Titanium Rep Power: 16	Wrote to Billy last week. No update yet.. __________________ 2009 370z, MT & Sport package. DynoPack (stock): 268.8WHP & 224.4 Torque//K&N filters//Air cabin filter//HPS Tubes//Tune to come when VVEL...

10-01-2010, 01:40 AM	#123 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	Check the DIY: DIY coilover install It's about a 6 hour job if you have all the tools. About $200 to $400 for a shop to do it. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

10-04-2010, 07:25 PM	#126 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	So based on those #'s ^^^^ Does this mean they will be 'stiffer' than Eibachs...?? And what I'm saying is, I have a sub box in the back with 2x10" + amp... When I had Eibachs, the rear end squatted... So my question is if I had these springs, would it still do so, or are they able to handle the extra 120ish pounds? __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

10-04-2010, 07:29 PM	#127 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	Yes it should not sag as bad as the Eibachs. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV Last edited by tjlazer; 10-04-2010 at 08:17 PM.

10-04-2010, 08:03 PM	#128 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	Hmmm... I might have to shoot Swift a pm and find out if they've seen/dealt with this or not? __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

09-30-2010, 11:46 PM	#122 (permalink)
egz Base Member Join Date: Sep 2010 Location: Chicago Posts: 42 Drives: 09 370z tour s rd m6 Rep Power: 15	if there is a group buy im in! about how much would it cost to have these installed by a shop? and how difficult is a spring install on a touring s?

10-04-2010, 10:36 PM	#129 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	Well I do know that if you get LINEAR springs you will have less of a problem with a load in the back. Maybe get some Nismo springs? They are STIFF as Fvck! __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

10-07-2010, 02:57 PM	#131 (permalink)
370ZAttack Base Member Join Date: Sep 2010 Location: GA-FL Posts: 60 Drives: 370Z Rep Power: 15	Word is in. They're coming in 2 weeks According to KamiSpeed, Swift will only have 5 sets left. So you guys need to jump on these.

10-11-2010, 05:07 PM	#133 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	Kami will have 5 sets or Swift???!? __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

10-13-2010, 02:05 PM	#134 (permalink)
370ZAttack Base Member Join Date: Sep 2010 Location: GA-FL Posts: 60 Drives: 370Z Rep Power: 15	Swift were getting a total of 15 sets on this shipment, but 10 sets were all pre-sold. So Kami decided to buy the last 5 sets. Because Swift won't be getting any more for at least 6 more weeks. So that's why I jumped on the pre-order list. I don't want to wait 2 months for these. Not sure how many Kami have now though.

10-13-2010, 02:09 PM	#135 (permalink)
felt Base Member Join Date: Oct 2010 Location: inland empire Posts: 29 Drives: mazdaspeed3 Rep Power: 15	You would think that with the amount of demand for these springs have, theyd be capable of producing more.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2009 z34 Nismo out of production???	ericlikesyou	Nissan 370Z Pricing / Ordering Discussions	6	08-23-2009 07:34 AM
Latest Production Month	Jason	Nissan 370Z Pricing / Ordering Discussions	10	06-03-2009 10:45 PM
Nissan Production	SoCal 370Z	Nissan 370Z General Discussions	0	04-23-2009 03:25 PM
370z production	theDreamer	Nissan 370Z General Discussions	9	03-31-2009 10:37 PM
Due to production cuts...	Xtremradial	Europe	8	02-02-2009 11:03 AM