Help! Stillen H&R Spacer Problem!

marcussoori · 05-20-2010, 04:13 PM

Hi, guys. Ordered the H&R 15mm DRM front and 20mm DRS rear spacers from Stillen. Got them today, but the 15mm fronts aren't working! Checked that I have correctly labeled boxes.

Basically, the tech is telling me the wheel studs themselves (in addition to the supplied lug nuts) are unable to clear the relief well openings in the back of the wheel, which prevents the wheel from being flush mounted to the spacer. *Does this make sense? *Again, the stud is contacting the edge of the relief well.

What I'd like to know is: how many of you have successfully installed these with the 19", non-Anny. Rays wheels? Also, any advice?

I appreciate your assistance, guys!

jeepersnate · 05-20-2010, 04:22 PM

Anyone have a setup of 15mm spacers in front and 20 rear?

I hope this helps

tjlazer · 05-20-2010, 04:23 PM

You have to get the type of spacer with replaceable longer lugs. Not the type where it has it's own lugs.

azn370z · 05-20-2010, 04:33 PM

Only 20mm will work. That's the 2nd time stillen has sold the wrong spacers.

jeepersnate · 05-20-2010, 04:35 PM

Quote:

Originally Posted by azn370z

Only 20mm will work. That's the 2nd time stillen has sold the wrong spacers.

They better get it together because this is the car of the decade

phelan · 05-20-2010, 04:35 PM

probably if you went DRS both front and rear you'd be fine.

RCZ · 05-20-2010, 05:28 PM

DRS all around i thought..

phelan · 05-20-2010, 05:37 PM

^ ? he got DRM fronts I thought.

ChrisSlicks · 05-20-2010, 05:41 PM

Quote:

Originally Posted by tjlazer

You have to get the type of spacer with replaceable longer lugs. Not the type where it has it's own lugs.

The bolt on ones <20mm won't work for most wheels (including the stock wheels). Stillen needs to make a note of this fact so they stop selling them by default.

Basically they gave you your order backwards. It should have been:
15mm DRS
20mm DRM

The fronts are the easiest to do the stud replacement on anyway. Use the 20mm DRM style on the rear so you don't have to disassemble the parking brake. Although I did DRS style on all 4 corners and it wasn't bad at all.

Now you've got the problem that Stillen wont take them back because they have been "installed" (or failed install as the case maybe).

Majestik · 05-20-2010, 05:47 PM

I've got H&R 20mm DRS at the front and 25mm DRM at the rear. The camber at the rear is a little aggressive as there was risk of rubbing due to having eibach springs.

If I was to do it again I'd have 20mm front and rears.

Don't forget that you require the rear camber kit...

Josh@STILLEN · 05-20-2010, 06:02 PM

Well to be fair, he ordered them online.. we couldn't have known specifically what his goals were. We sell the DRM's because some like them for the rear. And if you think we haven't gotten orders for 20mm fronts and 15mm rear, you'd be wrong.. not my cup of tea, but we don't make demands in how you want to set up your car.

We are, however, refining our website to help reflect a proper choice between DRS and DRM. And make some specific notes to help customers.

The last thing we'd want is confusion..

ChrisSlicks · 05-20-2010, 06:08 PM

Quote:

Originally Posted by Josh@STILLEN

Well to be fair, he ordered them online.. we couldn't have known specifically what his goals were. We sell the DRM's because some like them for the rear. And if you think we haven't gotten orders for 20mm fronts and 15mm rear, you'd be wrong.. not my cup of tea, but we don't make demands in how you want to set up your car.

We are, however, refining our website to help reflect a proper choice between DRS and DRM. And make some specific notes to help customers.

The last thing we'd want is confusion..

Ah ha! Web order.

You just need to expand the comment you have on the web site that warns about the anniversary wheels not being compatible with the 15mm DRM.

Josh@STILLEN · 05-20-2010, 06:13 PM

Quote:

Originally Posted by ChrisSlicks

Ah ha! Web order.

You just need to expand the comment you have on the web site that warns about the anniversary wheels not being compatible with the 15mm DRM.

Working on that right now.. we'll make a little novel of warnings in there to help out..

RCZ · 05-20-2010, 06:42 PM

Basically you ordered the wrong parts and blamed Stillen for it. Cool.

azn370z · 05-20-2010, 07:02 PM

He probably ordered it off stillens website because it says it works on the 370z. So you can't blame the guy. What's the point of buying online if you have to call in to verify it works.

05-20-2010, 04:13 PM	#1 (permalink)
marcussoori Enthusiast Member Join Date: Mar 2009 Location: USA Posts: 468 Drives: 09 370Z Red AT Sport Rep Power: 16	Help! Stillen H&R Spacer Problem! Hi, guys. Ordered the H&R 15mm DRM front and 20mm DRS rear spacers from Stillen. Got them today, but the 15mm fronts aren't working! Checked that I have correctly labeled boxes. Basically, the tech is telling me the wheel studs themselves (in addition to the supplied lug nuts) are unable to clear the relief well openings in the back of the wheel, which prevents the wheel from being flush mounted to the spacer. Does this make sense? Again, the stud is contacting the edge of the relief well. What I'd like to know is: how many of you have successfully installed these with the 19", non-Anny. Rays wheels? Also, any advice? I appreciate your assistance, guys! __________________ Stillen CBE & G3 LTIs, Motordyne M370, Berk HFCs, H&R 15/20mm spacers, CiNcity headlights, yellow OEM strut brace, Password: JDM CF engine bay parts, EVO-R CF front bumper parts, CF "Z" badge, VIS CF hood, Fujimura CF "diffuser", Show-N-Go plate frame, Katzkin red interior, interior CF, Pioneer BT-90 full system, Viper SmartStart

05-20-2010, 04:22 PM	#2 (permalink)
jeepersnate Base Member Join Date: Jan 2009 Location: Fairfax, VA Age: 43 Posts: 120 Drives: 2010Sprt/Touring/MT6 Rep Power: 16	Anyone have a setup of 15mm spacers in front and 20 rear? I hope this helps __________________

05-20-2010, 04:23 PM	#3 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	You have to get the type of spacer with replaceable longer lugs. Not the type where it has it's own lugs. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

05-20-2010, 04:33 PM	#4 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 490	Only 20mm will work. That's the 2nd time stillen has sold the wrong spacers. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

05-20-2010, 04:35 PM	#6 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	probably if you went DRS both front and rear you'd be fine. __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

05-20-2010, 05:28 PM	#7 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	DRS all around i thought..

05-20-2010, 05:37 PM	#8 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	^ ? he got DRM fronts I thought. __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

05-20-2010, 05:47 PM	#10 (permalink)
Majestik Track Member Join Date: Aug 2009 Location: SE Melbourne, Australia Posts: 800 Drives: '13 Jet Black R35GTR Rep Power: 17	I've got H&R 20mm DRS at the front and 25mm DRM at the rear. The camber at the rear is a little aggressive as there was risk of rubbing due to having eibach springs. If I was to do it again I'd have 20mm front and rears. Don't forget that you require the rear camber kit... __________________ 2009 Black 370Z AT7 \| 2010 Satin Black MT6 www.Zclub.com.au - where the Aussie 'Z' Action is at CF AMUSE VESTITO \| FAST INTENTIONS \| STILLEN \| K&N \| EIBACH \| NISMO \| FORMULA1 Also '13 R35GTR Jet Black

05-20-2010, 06:02 PM	#11 (permalink)
Josh@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Costa Mesa, CA Posts: 1,197 Drives: 2004 G35 Coupe 6MT Rep Power: 533	Well to be fair, he ordered them online.. we couldn't have known specifically what his goals were. We sell the DRM's because some like them for the rear. And if you think we haven't gotten orders for 20mm fronts and 15mm rear, you'd be wrong.. not my cup of tea, but we don't make demands in how you want to set up your car. We are, however, refining our website to help reflect a proper choice between DRS and DRM. And make some specific notes to help customers. The last thing we'd want is confusion..

05-20-2010, 06:42 PM	#14 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Basically you ordered the wrong parts and blamed Stillen for it. Cool.

05-20-2010, 07:02 PM	#15 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 490	He probably ordered it off stillens website because it says it works on the 370z. So you can't blame the guy. What's the point of buying online if you have to call in to verify it works. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Oil Pan Spacer	wstar	DIY Section (Do-It-Yourself)	44	04-23-2018 08:22 AM
Stillen intake rattling problem?	azn370z	Intake/Exhaust	31	01-28-2014 09:36 PM
plenum spacer/ t.b. spacer	jnaut	Intake/Exhaust	56	08-08-2013 03:57 AM
Anyone else have this problem? Stillen Intake...	Darkaeon	Intake/Exhaust	55	06-03-2010 09:37 PM
New Roadster, Spoiler problem, dealer problem	Hello	Nissan 370Z General Discussions	26	01-11-2010 06:22 PM