For those that are lowered..

azn370z · 07-14-2010, 10:54 PM

Quote:

Originally Posted by Westwood

any pic on what im supposed to cut? cuz ill just take out the sawzall and go Jason on my wheel well

I would just leave it alone and cover it with glue once it wears far enough down to expose metal.

Mike · 07-14-2010, 10:55 PM

Quote:

Originally Posted by Westwood

on 19"? im dropped 1.5" no prob with my 19" stock rays but my new 20" Rrrrr Rrrrrr on almost every corner

yes, stock offset nismo s-tune 19s with 295 rear and 255 front AD08s.

Westwood · 07-14-2010, 11:04 PM

Quote:

Originally Posted by azn370z

I would just leave it alone and cover it with glue once it wears far enough down to expose metal.

thanks for the pic! but i cant let it wear out the noise is freaking annoying

Spec Jay · 07-14-2010, 11:35 PM

i was planning on doing the boxcutter electrical tape way

the_student · 07-14-2010, 11:58 PM

Quote:

Originally Posted by azn370z

I would just leave it alone and cover it with glue once it wears far enough down to expose metal.

That pic is exactly what my tire scrapes on. That stupid protrusion. I have KW V3 out of box settings. Lowered 1.5 in in front with 20 mm spacers. I'm thinking of changing the compression and that might help as well.

OMGWTFBBQ · 07-15-2010, 02:26 PM

I actually cut that bumper tab off.

That fender liner piece is hanging out in my trunk. When I get home, I'll take pictures of what I had done on the front. All it involves is a fender roller (or fender finishing tool in my case because I didn't have the tools necessary to remove that bolt on the hub to secure a fender roller on) and a box cutter.

Westwood · 07-15-2010, 08:17 PM

Quote:

Originally Posted by OMGWTFBBQ

I actually cut that bumper tab off.

That fender liner piece is hanging out in my trunk. When I get home, I'll take pictures of what I had done on the front. All it involves is a fender roller (or fender finishing tool in my case because I didn't have the tools necessary to remove that bolt on the hub to secure a fender roller on) and a box cutter.

damn can you post some pics dude?!

i think ill have to get my front fenders rolled

LateralG'z · 07-15-2010, 10:10 PM

Do it soon please

OMGWTFBBQ · 07-16-2010, 02:01 PM

Uhm.. I apologize, but I don't have the best picture taking skills. Hopefully the message gets across though. If anyone has any questions, feel free to ask haha.

In the third picture, you can kind of see where I relocated the bumper tab. The fender tab is actually bent in, the tab on the bumper cut off, and it's relocated to the location above. Kind of hard to explain. And it seems like I cut a large portion of my fender liners off, but it's not that bad in real life. I'm just horrible at taking pictures especially since the angle was pretty bad because I didn't have time to take the wheel off or at least turn it to the side.

Yes, I also realize I desperately need a car wash haha.

Westwood · 07-16-2010, 06:07 PM

dude my rubbing is gone and i noticed that all the plastic tabs are gone too. lol

OMGWTFBBQ · 07-16-2010, 07:43 PM

Haha nice! That works too.

kevr6 · 07-16-2010, 08:57 PM

Wow! I don't seem to rub on that at all. Strange! Must be road condition differences then.

Bster · 07-17-2010, 04:15 AM

I don't rub either... and I've gone through quite bumpy roads here due to road constructions.

The only "issues" I have is scrapping the front under spoiler.

OMGWTFBBQ · 07-17-2010, 04:33 AM

Rubbing can be due to a bunch of reasons. Spring rates, dampening settings, wheel width, wheel offset, tire size, etc.

I'm currently running 18x10 +15 in the front.

AndyZ · 07-18-2010, 04:59 PM

i droped 1.5~2" ive got missing taps (rubbing little bit?) but thats it
never heard rubbing sound from my car

07-14-2010, 11:35 PM	#19 (permalink)
Spec Jay A True Z Fanatic Join Date: Apr 2009 Location: Bummerton Posts: 1,510 Drives: MtB 09 370z Rep Power: 19	i was planning on doing the boxcutter electrical tape way __________________ 09 Monterey Blue Global Time Attack Street Class Build Build Thread:Saber! Instagram:@SpecJay

07-15-2010, 10:10 PM	#23 (permalink)
LateralG'z Track Member Join Date: Nov 2009 Location: Oklahoma Posts: 876 Drives: 370z Rep Power: 17	Do it soon please __________________ 2010 Mag Black, 6MT,

07-16-2010, 06:07 PM	#25 (permalink)
Westwood Track Member Join Date: Feb 2010 Location: Ottawa,Canada Posts: 745 Drives: C63 AMG Rep Power: 16	dude my rubbing is gone and i noticed that all the plastic tabs are gone too. lol __________________ Mods: Stillen G3 \| Stillen lightweight crank pulley \| Berk hfc's \| Top speed pro 1 CBE \| Jic Magic y pipe \| 20" Vossen 9.5/10.5 \| Megan Coilovers \| Smoked JDM tail lights \| Blacked out headlights \| Sprint booster \| Shine Auto CF Front/Rear lip kit \| Evor R CF Side blades,CF fang cover,CF Nose Audio: Kenwood Excelon DNX9960 \| JL 1000w \| JL 12W6v2

07-16-2010, 08:57 PM	#27 (permalink)
kevr6 A True Z Fanatic Join Date: Feb 2009 Location: N.W. Atlanta Posts: 1,515 Drives: '09 Graphite 370Z 6M Rep Power: 666	Wow! I don't seem to rub on that at all. Strange! Must be road condition differences then. __________________ *Beware...* Daily Sliding In My ZLED!

07-17-2010, 04:15 AM	#28 (permalink)
Bster Base Member Join Date: Feb 2009 Location: Singapore Posts: 174 Drives: '09 PW Z34 Manual Rep Power: 16	I don't rub either... and I've gone through quite bumpy roads here due to road constructions. The only "issues" I have is scrapping the front under spoiler. __________________ TEIN Monoflex with EDFC \| H&R 20mm Spacer \| SPC Rear Camber \| HKS Hi-Power \| Berks High Flow Cat \| Stillen G3 \| EVO R Rear Diffuser \| Blacked out headlights \| Z1 34Row Cooler \| Z1 SS Brake lines

07-15-2010, 02:26 PM	#21 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	I actually cut that bumper tab off. That fender liner piece is hanging out in my trunk. When I get home, I'll take pictures of what I had done on the front. All it involves is a fender roller (or fender finishing tool in my case because I didn't have the tools necessary to remove that bolt on the hub to secure a fender roller on) and a box cutter.

07-16-2010, 02:01 PM	#24 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	Uhm.. I apologize, but I don't have the best picture taking skills. Hopefully the message gets across though. If anyone has any questions, feel free to ask haha. In the third picture, you can kind of see where I relocated the bumper tab. The fender tab is actually bent in, the tab on the bumper cut off, and it's relocated to the location above. Kind of hard to explain. And it seems like I cut a large portion of my fender liners off, but it's not that bad in real life. I'm just horrible at taking pictures especially since the angle was pretty bad because I didn't have time to take the wheel off or at least turn it to the side. Yes, I also realize I desperately need a car wash haha.

07-16-2010, 07:43 PM	#26 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	Haha nice! That works too.

07-17-2010, 04:33 AM	#29 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	Rubbing can be due to a bunch of reasons. Spring rates, dampening settings, wheel width, wheel offset, tire size, etc. I'm currently running 18x10 +15 in the front.

07-18-2010, 04:59 PM	#30 (permalink)
AndyZ Enthusiast Member Join Date: Dec 2009 Location: Santa clara Age: 35 Posts: 334 Drives: Ford Escort "100HP" Rep Power: 15	i droped 1.5~2" ive got missing taps (rubbing little bit?) but thats it never heard rubbing sound from my car __________________ NOR CAL TT Z34 Next - Built Engine / V-tec?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Has anyone lowered their car yet? Coil overs or springs?	Aus370z	Australia/New Zealand	28	01-08-2010 01:21 AM
low profile jack for lowered z	jasonhoutx	Nissan 370Z General Discussions	4	06-27-2009 10:38 PM