I think I regret putting in Eibach Springs. Opinions please! Pics

craniac24 · 04-11-2010, 02:01 PM

So yesterday I got my Eibach springs installed along with an intake/exhaust. When I was planning my mods, I read that Eibach achieves a .8" drop in the front and .9" in the rear, which I thought would have been perfect. Unfortunately, when i picked up my car, the drop looked lower than I pictured it in my mind. Disappointed and confused, I went to Eibach's website, and sure enough, their springs give a .8"/.9" drop for the coupe. However, when I looked at the drop for the roadster, it claimed a 1.2" drop for both front and rear! I looked to make sure that it was the same part number...it was.

This is confusing. I would assume that the stock springs for the coupe and roadster are identical. But if that were the case, why would the Eibach Springs drop the car almost a half inch more on the roadster??

Anyway...here are some pics. Sorry for the crappy camera phone. I was really looking for a very subtle drop, but I think I overdid it. Tell me I didn't make a mistake! Actually...don't do that. Tell me the truth. I don't mind spending the money to put the stock springs back in if it would make the car look better.

Final note: I am putting spacers on the car and putting on a rear camber kit. Maybe that might make the overall appearance look like a more subtle drop...who knows.

Looking forward to your opinions.

twotonezed · 04-11-2010, 02:13 PM

I think it looks fine. I would say that if the lowering more than you expected isn't effecting things like uncontrolled rubbing or scraping leave it. You did mention that you were putting in spacers in the rear but your pictures show that the fronts possibly need spacers as well. It might just be the pics. Other than that I don't see an issue with a low, sleek, 370z roadster. Do you?

Minicobra1 · 04-11-2010, 02:15 PM

Push the wheels out with 20mm spacers front & Rear and put on the rear SPC camber kit, I think it makes a huge difference, then you can decide if you want to take out the Eibachs. When I put the rear camber back closer to stock, it actually raised the car about 5mm. You can always go with some adjustable BC coilovers (about $995) sell your Eibachs, then you can adjust the ride height where you want it.

I don't think it looks too low, but definitely need the spacers. I'm running 15mm front and 20mm rear, but my Nismo rims have a more aggressive offset, I would definitely go 20mm on front with stock sport rims.
See my pics. Nismo Wheels in Matt Black

Minicobra1 · 04-11-2010, 02:17 PM

Quote:

Originally Posted by twotonezed

I think it looks fine. I would say that if the lowering more than you expected isn't effecting things like uncontrolled rubbing or scraping leave it. You did mention that you were putting in spacers in the rear but your pictures show that the fronts possibly need spacers as well. It might just be the pics. Other than that I don't see an issue with a low, sleek, 370z roadster. Do you?

Agreed, as long as your happy with the ride quality

Trips · 04-11-2010, 02:19 PM

Quote:

Originally Posted by Minicobra1

Push the wheels out with 20mm spacers and put on the rear SPC camber kit, I think it makes a huge difference, then you can decide if you want to take out the Eibachs. You can always go with some adjustable BC coilovers (about $995) sell your Eibachs, then you can adjust the ride height where you want it.

I don't think it looks too low, but definitely need the spacers.

djpathfinder · 04-11-2010, 02:24 PM

Not too low at all...looks good! To reiterate what's been said already, the spacers (20mm rear and 15 mm front) would push the wheels out and make it look even better. For a 1 inch drop, I'm not sure if you need the camber kit. Both Eibach and H&R are supposed to give you an approximate 1" drop in the rear and 1.1 or 1.2" drop in the front. This will make both front and rear wheel well spaces about the same. For less than a 1" drop, coilovers would be the way to go....try it for a while and see if you will get used to it. As far as looks...nothing wrong with what you have right now.

craniac24 · 04-11-2010, 02:27 PM

Quote:

Originally Posted by Minicobra1

Push the wheels out with 20mm spacers front & Rear and put on the rear SPC camber kit, I think it makes a huge difference, then you can decide if you want to take out the Eibachs.
See my pics. Nismo Wheels in Matt Black

This is exactly what my plans were. You don't think I made that decision without seeing your pics already...do you?

Then again, I've seen your pics where you have the spacers installed only on the rear. Even still, my drop in front looks lower than yours. Don't really know why.

frost · 04-11-2010, 02:39 PM

Quote:

Originally Posted by Minicobra1

Push the wheels out with 20mm spacers front & Rear and put on the rear SPC camber kit, I think it makes a huge difference, then you can decide if you want to take out the Eibachs. When I put the rear camber back closer to stock, it actually raised the car about 5mm. You can always go with some adjustable BC coilovers (about $995) sell your Eibachs, then you can adjust the ride height where you want it.

I don't think it looks too low, but definitely need the spacers. I'm running 15mm front and 20mm rear, but my Nismo rims have a more aggressive offset, I would definitely go 20mm on front with stock sport rims.
See my pics. Nismo Wheels in Matt Black

Quote:

Originally Posted by Triple's

x3

craniac24 · 04-11-2010, 02:43 PM

By the way, can front camber be adjusted at all without control arms? Or will I be stuck with whatever the outcome is when I get the spacers put in...

NomadicMarine · 04-11-2010, 03:21 PM

I think it looks good. Just need spacers.

RCZ · 04-11-2010, 04:14 PM

Looks great, you need spacers!

SophiaZ · 04-11-2010, 06:55 PM

It looks great...just be careful with bumps in the road....I'm glad I have stock springs since I have already had the aero deflector come half off due to NJ sh*tty roads!

Much more careful now. If I had the Eibach springs, the front bumper would be laying in the road in pieces LOL

Trips · 04-11-2010, 07:04 PM

Quote:

Originally Posted by SophiaZ

It looks great...just be careful with bumps in the road....I'm glad I have stock springs since I have already had the aero deflector come half off due to NJ sh*tty roads!

Much more careful now. If I had the Eibach springs, the front bumper would be laying in the road in pieces LOL

craniac24 · 04-11-2010, 07:24 PM

Quote:

Originally Posted by NomadicMarine

I think it looks good. Just need spacers.

Quote:

Originally Posted by RCZ

Looks great, you need spacers!

So you're saying I need spacers?

shabarivas · 04-11-2010, 07:30 PM

no... the roadster is heavier than the coupe no? it would stand to reason that the springs would compress more if you are a heavier car using the same spring...

04-11-2010, 02:15 PM	#3 (permalink)
Minicobra1 A True Z Fanatic Join Date: Nov 2008 Location: Orange County, CA. Posts: 1,205 Drives: 370Z Tour, Spt, 6mt Rep Power: 645	Push the wheels out with 20mm spacers front & Rear and put on the rear SPC camber kit, I think it makes a huge difference, then you can decide if you want to take out the Eibachs. When I put the rear camber back closer to stock, it actually raised the car about 5mm. You can always go with some adjustable BC coilovers (about $995) sell your Eibachs, then you can adjust the ride height where you want it. I don't think it looks too low, but definitely need the spacers. I'm running 15mm front and 20mm rear, but my Nismo rims have a more aggressive offset, I would definitely go 20mm on front with stock sport rims. See my pics. Nismo Wheels in Matt Black __________________ 370z Tour\| Spt Pack\|Navi\|BERK CBE\|Berk HFC's\| Eibach Springs\| Hotchkis Sway Bars\|SPC Camber Arms\|15mm Ichiba Wheel Spacers\| 19"Factory Nismo Wheels-Matt Black\|Stop Tech Rotors\|TWM Shifter\|3M Tint\|Black Fangs\|Black Rear Valance\|JDM Fog Light\| MY BAND-www.myspace.com/petroleum Last edited by Minicobra1; 04-11-2010 at 02:23 PM.

04-11-2010, 02:24 PM	#6 (permalink)
djpathfinder A True Z Fanatic Join Date: Mar 2010 Location: Edmonton, Canada Posts: 12,910 Drives: 2012 GT-R BE Rep Power: 734	Not too low at all...looks good! To reiterate what's been said already, the spacers (20mm rear and 15 mm front) would push the wheels out and make it look even better. For a 1 inch drop, I'm not sure if you need the camber kit. Both Eibach and H&R are supposed to give you an approximate 1" drop in the rear and 1.1 or 1.2" drop in the front. This will make both front and rear wheel well spaces about the same. For less than a 1" drop, coilovers would be the way to go....try it for a while and see if you will get used to it. As far as looks...nothing wrong with what you have right now. __________________ 2012 GT-R Black Edition Jet Black 2010 370Z 40th Anniversary // SOLD

04-11-2010, 02:43 PM	#9 (permalink)
craniac24 Enthusiast Member Join Date: Mar 2010 Location: Ronkonkoma, NY Posts: 339 Drives: 2010 PG Roadster Rep Power: 403	By the way, can front camber be adjusted at all without control arms? Or will I be stuck with whatever the outcome is when I get the spacers put in... __________________ 2010 6MT PG Roadster w/Sport & NAV. Stillen Exhaust, Stillen GIII Intake, Eibach Springs, H&R Spacers 15f/20r, SPC Rear Camber Kit. Thanks to Vinny Ten Racing!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eibach Springs & Spacers - Review+Pics	Minicobra1	Brakes & Suspension	128	09-26-2011 12:12 AM
who installed their own eibach springs?	Mike	Brakes & Suspension	19	04-11-2010 03:41 AM
FI TDX and Eibach springs	tommyguns	Intake/Exhaust	9	01-17-2010 12:25 AM
Update pics of Eibach lowering springs	DJcuetip	Brakes & Suspension	38	04-24-2009 11:59 PM

04-11-2010, 02:13 PM	#2 (permalink)
twotonezed Base Member Join Date: Jun 2009 Location: Moorhead Posts: 87 Drives: 09 370 base Rep Power: 16	I think it looks fine. I would say that if the lowering more than you expected isn't effecting things like uncontrolled rubbing or scraping leave it. You did mention that you were putting in spacers in the rear but your pictures show that the fronts possibly need spacers as well. It might just be the pics. Other than that I don't see an issue with a low, sleek, 370z roadster. Do you?

04-11-2010, 03:21 PM	#10 (permalink)
NomadicMarine Base Member Join Date: Apr 2010 Location: Chicago Posts: 29 Drives: Moonwalkin' Rep Power: 16	I think it looks good. Just need spacers.

04-11-2010, 04:14 PM	#11 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Looks great, you need spacers!

04-11-2010, 06:55 PM	#12 (permalink)
SophiaZ A True Z Fanatic Join Date: Dec 2009 Location: South Jersey Posts: 1,463 Drives: 2020 50th anniv 7AT Rep Power: 6733	It looks great...just be careful with bumps in the road....I'm glad I have stock springs since I have already had the aero deflector come half off due to NJ sh*tty roads! Much more careful now. If I had the Eibach springs, the front bumper would be laying in the road in pieces LOL

04-11-2010, 07:30 PM	#15 (permalink)
shabarivas A True Z Fanatic Join Date: Apr 2009 Location: Sacramento, CA Posts: 2,188 Drives: 370z MB 6mt Rep Power: 915	no... the roadster is heavier than the coupe no? it would stand to reason that the springs would compress more if you are a heavier car using the same spring...

I think I regret putting in Eibach Springs. Opinions please! *Pics*

I think I regret putting in Eibach Springs. Opinions please! Pics