Alliance BBK (First Powder-Coated Red)
 

So I got an e-mail from Blackline Motor-Sports yesterday. I will be the first to have them custom powder-coated red. I like what I see, they are going to compliment the SSR-SP3 wheels very well. Thanks for the pics Mike. :bowrofl:

http://blacklinems.com/images/alliance/pc1.JPG
http://blacklinems.com/images/alliance/pc2.JPG

Hot! Can not wait to see them mounted up.

Would have went AP myself for the price... I am assuming you are getting a BBK for show reasons?

I am getting them just cause I like them, how about that! :) any probs with that>?

Has any of Alliance's BBK been track tested and abused?

Me or Bullitt will be the first known to do this I think. I just hope this 14.96" rotor fits in the 19" wheels like they said they would. It looks like its going to be a tight fit.

JB, let me know when the brakes & wheel/tires are on so I can come over and see.

I am doing a comparison test tomorrow with Semtex and it's gonna be on film just for you guys. All I haveto say is semtex's car with the sport brakes is gonna blow by me like a freight train!!! Alliance brakes stop u in a dam hurry!!!

Packing up the orders right now Justin, I'll snap a few more pics to tide you over before i tape your box up :tup:
ohhh interesting. going to be very hard to compare the brakes 100% accurately between the two without equipment and going off a your guys' reactions and sense, but definitely in for a result! link me up when you make the thread

We ran into some ABS issues on my car and are going to attempt the HD video another time when I make some changes to the car and get it back from GTM. I will say this until ABS "ice mode" kicked in the car was going to stop at around 45-50ft from 60-0 but ended up going 70-80ft due to that 'ice mode". Ben's car stopped a consistent 65-67ft. Brake fad settled in on his car after 3 stops. The alliance took a beating of a full bed in process of 10+ hard 60+mph - 0mph stops and several test runs... I let them cool for 5 mins and then ran them again hard... the brakes didnt fade at all... "ice mode" was pissing me off so much I unhooked the abs and did two stops and now I have a flat spot on my right rear tire lol from it locking up hahaha... I did take it to another surface and the car stopped with out the hint of "ice mode" 60-0 sooo... I think we are going to give it another shot. I know the brakes will stop sub 60ft easy once I overcome the "ice mode" issue.

Caliper looks amazing, and def like it better than the anodized pink they come in. I wish they would have split your caliper though and taken the main six cross bolts out, that way when you put it back together, you still have polished aluminum allen head bolts.

Also, JB, I'm from Houston, and I'm just trying to help a brotha out by saying, your "Location" under your avatar says Housotn. Lol.

OP, here's my question.

Are you going to run the SSR with the BBK? If so, I highly doubt that it'd fit, diameterwise.

Reason being is because the SSR has step lips, thus the inner diameter is going to be smaller than regular 19". These BBK requires 19" wheels to clear, so I'm afraid that you may run into the problem.

I too have the Rotora 15" BBK and when I chose the wheels even with 20" step lip, it won't clear the diameter. :(

I really hope that you prove me wrong, that way I can get a set of 20" step lip wheels for the G35

I dont think they will fit either but only time will tell. Might have to get a 14" rotor, I am almost certin I will need 14". I told Mike I would try to fit them first. I dont have templetes to go off so it like playing the guessing game. Looks like I will be waiting longer to get this kit on. Spacers is not what I need it is a smaller rotor that will be needed but I will find out sat.
**********Stay tuned for the verdict

I doubt you'd need spacers but I'm pretty certain you'd have to go with smaller rotors. I know what you mean by going with the guess game & no template. It was a pita for me when choosing wheels to fit my setup. I finally went with Vellano for a full custom setup that's designed for right clearance & max lipage.

I'm anxious for the updates. Keep us posted :tup:

Below is a picture of a Z with 370mm Endless rotors which is 14.56656367 inches the rotor I went with is 380mm which is 14.96025458 inches so yes there is no reason why they wont fit 20". I have the same identical specs as the Z in this picture. 1/4 of an inch difference is all I am worried about but it might be enough to not fit but I will be the lab rat on this one. Plus Mike said we could switch out for a 14" rotor as soon as the bracketts are made. Mikes got my back either way so we will find out soon if 1/4 inch is going to kill me or not.:ugh2:
http://www.more-japan.com/blogs/wp-c...-1024x6821.jpg
http://www.ssr-wheels.com/images/sp3/gallery/1.jpg
http://www.ssr-wheels.com/images/splashes/sp3_370z.jpg