Alliance BBK (First Powder-Coated Red)

JB-370z · 04-02-2010, 10:33 AM

So I got an e-mail from Blackline Motor-Sports yesterday. I will be the first to have them custom powder-coated red. I like what I see, they are going to compliment the SSR-SP3 wheels very well. Thanks for the pics Mike.

WShade · 04-02-2010, 11:14 AM

Hot! Can not wait to see them mounted up.

shabarivas · 04-02-2010, 01:50 PM

Would have went AP myself for the price... I am assuming you are getting a BBK for show reasons?

JB-370z · 04-02-2010, 02:45 PM

I am getting them just cause I like them, how about that!

any probs with that>?

NyCSnEaK · 04-03-2010, 07:59 AM

Has any of Alliance's BBK been track tested and abused?

JB-370z · 04-03-2010, 10:52 AM

Me or Bullitt will be the first known to do this I think. I just hope this 14.96" rotor fits in the 19" wheels like they said they would. It looks like its going to be a tight fit.

theDreamer · 04-03-2010, 10:54 AM

JB, let me know when the brakes & wheel/tires are on so I can come over and see.

bullitt5897 · 04-04-2010, 12:52 AM

I am doing a comparison test tomorrow with Semtex and it's gonna be on film just for you guys. All I haveto say is semtex's car with the sport brakes is gonna blow by me like a freight train!!! Alliance brakes stop u in a dam hurry!!!

Mike@Blackline · 04-06-2010, 04:59 PM

Packing up the orders right now Justin, I'll snap a few more pics to tide you over before i tape your box up

Quote:

Originally Posted by bullitt5897

I am doing a comparison test tomorrow with Semtex and it's gonna be on film just for you guys. All I haveto say is semtex's car with the sport brakes is gonna blow by me like a freight train!!! Alliance brakes stop u in a dam hurry!!!

ohhh interesting. going to be very hard to compare the brakes 100% accurately between the two without equipment and going off a your guys' reactions and sense, but definitely in for a result! link me up when you make the thread

bullitt5897 · 04-06-2010, 05:43 PM

We ran into some ABS issues on my car and are going to attempt the HD video another time when I make some changes to the car and get it back from GTM. I will say this until ABS "ice mode" kicked in the car was going to stop at around 45-50ft from 60-0 but ended up going 70-80ft due to that 'ice mode". Ben's car stopped a consistent 65-67ft. Brake fad settled in on his car after 3 stops. The alliance took a beating of a full bed in process of 10+ hard 60+mph - 0mph stops and several test runs... I let them cool for 5 mins and then ran them again hard... the brakes didnt fade at all... "ice mode" was pissing me off so much I unhooked the abs and did two stops and now I have a flat spot on my right rear tire lol from it locking up hahaha... I did take it to another surface and the car stopped with out the hint of "ice mode" 60-0 sooo... I think we are going to give it another shot. I know the brakes will stop sub 60ft easy once I overcome the "ice mode" issue.

Equinox · 04-07-2010, 11:59 AM

Caliper looks amazing, and def like it better than the anodized pink they come in. I wish they would have split your caliper though and taken the main six cross bolts out, that way when you put it back together, you still have polished aluminum allen head bolts.

Also, JB, I'm from Houston, and I'm just trying to help a brotha out by saying, your "Location" under your avatar says Housotn. Lol.

ATL_Red_G35 · 04-08-2010, 01:17 PM

OP, here's my question.

Are you going to run the SSR with the BBK? If so, I highly doubt that it'd fit, diameterwise.

Reason being is because the SSR has step lips, thus the inner diameter is going to be smaller than regular 19". These BBK requires 19" wheels to clear, so I'm afraid that you may run into the problem.

I too have the Rotora 15" BBK and when I chose the wheels even with 20" step lip, it won't clear the diameter.

I really hope that you prove me wrong, that way I can get a set of 20" step lip wheels for the G35

JB-370z · 04-08-2010, 01:53 PM

I dont think they will fit either but only time will tell. Might have to get a 14" rotor, I am almost certin I will need 14". I told Mike I would try to fit them first. I dont have templetes to go off so it like playing the guessing game. Looks like I will be waiting longer to get this kit on. Spacers is not what I need it is a smaller rotor that will be needed but I will find out sat.
**********Stay tuned for the verdict

ATL_Red_G35 · 04-08-2010, 01:56 PM

Quote:

Originally Posted by JB-370z

I dont think they will fit either but only time will tell. Might have to get a 14" rotor, I am almost certin I will need 14". I told Mike I would try to fit them first. I dont have templetes to go off so it like playing the guessing game. Looks like I will be waiting longer to get this kit on. Spacers is not what I need it is a smaller rotor that will be needed but I will find out sat.
**********Stay tuned for the verdict

I doubt you'd need spacers but I'm pretty certain you'd have to go with smaller rotors. I know what you mean by going with the guess game & no template. It was a pita for me when choosing wheels to fit my setup. I finally went with Vellano for a full custom setup that's designed for right clearance & max lipage.

I'm anxious for the updates. Keep us posted

JB-370z · 04-08-2010, 02:07 PM

Quote:

Originally Posted by ATL_Red_G35

OP, here's my question.

Are you going to run the SSR with the BBK? If so, I highly doubt that it'd fit, diameterwise.

Reason being is because the SSR has step lips, thus the inner diameter is going to be smaller than regular 19". These BBK requires 19" wheels to clear, so I'm afraid that you may run into the problem.

I too have the Rotora 15" BBK and when I chose the wheels even with 20" step lip, it won't clear the diameter.

I really hope that you prove me wrong, that way I can get a set of 20" step lip wheels for the G35

Below is a picture of a Z with 370mm Endless rotors which is 14.56656367 inches the rotor I went with is 380mm which is 14.96025458 inches so yes there is no reason why they wont fit 20". I have the same identical specs as the Z in this picture. 1/4 of an inch difference is all I am worried about but it might be enough to not fit but I will be the lab rat on this one. Plus Mike said we could switch out for a 14" rotor as soon as the bracketts are made. Mikes got my back either way so we will find out soon if 1/4 inch is going to kill me or not.

04-02-2010, 10:33 AM	#1 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 20	Alliance BBK (First Powder-Coated Red) So I got an e-mail from Blackline Motor-Sports yesterday. I will be the first to have them custom powder-coated red. I like what I see, they are going to compliment the SSR-SP3 wheels very well. Thanks for the pics Mike. __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

04-02-2010, 11:14 AM	#2 (permalink)
WShade Track Member Join Date: Jan 2009 Location: San Antonio, TX Posts: 765 Drives: 09 370Z T/S/N Rep Power: 188	Hot! Can not wait to see them mounted up. __________________ Q50S Q60 RS400

04-02-2010, 02:45 PM	#4 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 20	I am getting them just cause I like them, how about that! any probs with that>? __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

04-03-2010, 10:52 AM	#6 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 20	Me or Bullitt will be the first known to do this I think. I just hope this 14.96" rotor fits in the 19" wheels like they said they would. It looks like its going to be a tight fit. __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

04-03-2010, 10:54 AM	#7 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4211	JB, let me know when the brakes & wheel/tires are on so I can come over and see. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

04-02-2010, 01:50 PM	#3 (permalink)
shabarivas A True Z Fanatic Join Date: Apr 2009 Location: Sacramento, CA Posts: 2,188 Drives: 370z MB 6mt Rep Power: 915	Would have went AP myself for the price... I am assuming you are getting a BBK for show reasons?

04-03-2010, 07:59 AM	#5 (permalink)
NyCSnEaK Base Member Join Date: Jun 2009 Location: NJ Posts: 44 Drives: 007 Z Rep Power: 16	Has any of Alliance's BBK been track tested and abused?

04-04-2010, 12:52 AM	#8 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3683	I am doing a comparison test tomorrow with Semtex and it's gonna be on film just for you guys. All I haveto say is semtex's car with the sport brakes is gonna blow by me like a freight train!!! Alliance brakes stop u in a dam hurry!!! __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

04-06-2010, 05:43 PM	#10 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3683	We ran into some ABS issues on my car and are going to attempt the HD video another time when I make some changes to the car and get it back from GTM. I will say this until ABS "ice mode" kicked in the car was going to stop at around 45-50ft from 60-0 but ended up going 70-80ft due to that 'ice mode". Ben's car stopped a consistent 65-67ft. Brake fad settled in on his car after 3 stops. The alliance took a beating of a full bed in process of 10+ hard 60+mph - 0mph stops and several test runs... I let them cool for 5 mins and then ran them again hard... the brakes didnt fade at all... "ice mode" was pissing me off so much I unhooked the abs and did two stops and now I have a flat spot on my right rear tire lol from it locking up hahaha... I did take it to another surface and the car stopped with out the hint of "ice mode" 60-0 sooo... I think we are going to give it another shot. I know the brakes will stop sub 60ft easy once I overcome the "ice mode" issue. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054* Last edited by bullitt5897; 04-06-2010 at 05:49 PM.

04-07-2010, 11:59 AM	#11 (permalink)
Equinox Track Member Join Date: Jul 2009 Location: Beaumont, TX Posts: 685 Drives: 06 Porsche Carrera S Rep Power: 18	Caliper looks amazing, and def like it better than the anodized pink they come in. I wish they would have split your caliper though and taken the main six cross bolts out, that way when you put it back together, you still have polished aluminum allen head bolts. Also, JB, I'm from Houston, and I'm just trying to help a brotha out by saying, your "Location" under your avatar says Housotn. Lol. __________________ Check out my Albums '13 Subaru WRX STi \| '06 Porsche 911 Carrera S (SOLD) \| '96 Mazda RX-7 6.0L V8 RHD (SOLD) \| '09 Nissan Nismo #0058 (SOLD)

04-08-2010, 01:17 PM	#12 (permalink)
ATL_Red_G35 Base Member Join Date: Apr 2010 Location: ATL Posts: 127 Drives: 03 G35 & 07 350z Rep Power: 16	OP, here's my question. Are you going to run the SSR with the BBK? If so, I highly doubt that it'd fit, diameterwise. Reason being is because the SSR has step lips, thus the inner diameter is going to be smaller than regular 19". These BBK requires 19" wheels to clear, so I'm afraid that you may run into the problem. I too have the Rotora 15" BBK and when I chose the wheels even with 20" step lip, it won't clear the diameter. I really hope that you prove me wrong, that way I can get a set of 20" step lip wheels for the G35

04-08-2010, 01:53 PM	#13 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 20	I dont think they will fit either but only time will tell. Might have to get a 14" rotor, I am almost certin I will need 14". I told Mike I would try to fit them first. I dont have templetes to go off so it like playing the guessing game. Looks like I will be waiting longer to get this kit on. Spacers is not what I need it is a smaller rotor that will be needed but I will find out sat. ********Stay tuned for the verdict __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning**)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nismo factory rims powder coated GR-02	Minicobra1	Wheels & Tires	61	09-05-2010 11:36 PM
FS: Alliance BBK 8/6 piston 15" rotors	SOLISIMO	Parts for sale (Private Classifieds)	33	03-18-2010 09:51 PM
Powder coating in Northern VA	m4a1mustang	Mid-Atlantic Region	17	12-26-2009 09:29 PM
powdered coated base wheels on MB?	OC 370ZEEE	Member's 370Z Gallery	10	11-05-2009 04:44 PM
Coated or Non-coated wheels?	YamahaR6	Wheels & Tires	2	04-14-2009 08:46 AM