SuperPro Eccentric UCA Bushings

OptionZero · 03-22-2023, 02:33 PM

I posted this elsewhere last week, but i checked their website. All arms have the same part numbers across Z34 and Rz34, so we can safely say all of the arms are cross-compatible. This is to be expected, as the chassis is the same; all they did was change the engine, body, and some minor tweaks to the tranny

regarding the suprpro arms:

You still need to pull the arm to install
You need to press/replace the bushing
You still need an alignment.

I couldn't find it on their website - but is this adjustable after install? does the arm need to be removed to adjust? If so, that's stupid

The adjustment range is listed as .5 to 1 degree, which is pretty limited

the SPL FUCA gives you more adjustment, on car, easy for the tech, won't break.

save up, do it once, do it right

Rusty · 03-22-2023, 03:02 PM

Quote:

Originally Posted by OptionZero

I posted this elsewhere last week, but i checked their website. All arms have the same part numbers across Z34 and Rz34, so we can safely say all of the arms are cross-compatible. This is to be expected, as the chassis is the same; all they did was change the engine, body, and some minor tweaks to the tranny

regarding the suprpro arms:

You still need to pull the arm to install
You need to press/replace the bushing
You still need an alignment.

I couldn't find it on their website - but is this adjustable after install? does the arm need to be removed to adjust? If so, that's stupid

The adjustment range is listed as .5 to 1 degree, which is pretty limited

the SPL FUCA gives you more adjustment, on car, easy for the tech, won't break.

save up, do it once, do it right

03-22-2023, 02:33 PM	#16 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,225 Drives: 15 370Z Nismo 6MT Rep Power: 214100	I posted this elsewhere last week, but i checked their website. All arms have the same part numbers across Z34 and Rz34, so we can safely say all of the arms are cross-compatible. This is to be expected, as the chassis is the same; all they did was change the engine, body, and some minor tweaks to the tranny regarding the suprpro arms: You still need to pull the arm to install You need to press/replace the bushing You still need an alignment. I couldn't find it on their website - but is this adjustable after install? does the arm need to be removed to adjust? If so, that's stupid The adjustment range is listed as .5 to 1 degree, which is pretty limited the SPL FUCA gives you more adjustment, on car, easy for the tech, won't break. save up, do it once, do it right Rusty, sx moneypit, k67p67 and 1 others like this. __________________ OptionZero Build Thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] SuperPro Rear Differential Bushings Set	Andrew's Z	Parts for sale (Private Classifieds)	0	07-26-2020 08:47 PM
[FOR SALE] Spl eccentric lock out kit	NeverBoneStck	Parts for sale (Private Classifieds)	6	08-14-2019 12:20 AM
[WTB] SPL Eccentric Lockout Kit	kaliwraith	Parts for sale (Private Classifieds)	0	08-02-2018 06:03 PM
[FOR SALE] New SPL - 1/2 Eccentric Lockout Kit	IPLG37	Parts for sale (Private Classifieds)	10	01-24-2017 12:15 PM
SuperPro 370z Bushing replacement	ZeN	Brakes & Suspension	4	05-24-2014 12:46 AM