Front Subframe Replacement

iweston33 · 02-10-2022, 10:15 AM

Quote:

Originally Posted by JARblue

The very first step according to the FSM is "remove engine and transmission assembly". I'd imagine you have to remove the transmission but it might be possible to support the engine from the top while you disconnect the subframe member - other smarter people will know the answer to this. Dropping the whole cradle and lifting the car off it is the easiest method of removing the engine tho; and then you can disconnect the subframe with it out of the vehicle.

Thanks

BORNGEARHEAD · 02-12-2022, 05:04 PM

I replaced a front subframe in a G37 and I didnt touch the engine/trans other than unbolting the engine mounts. But I used a hoist and a jack to support the engine in the air. Gonna be a pretty crappy job on the ground but it could be done. I would find someone with a hoist and work something out with them.

BettyZ · 02-17-2022, 10:27 PM

Go to harbor freight and buy an engine hoist. Take off upper manifold. Get a piece of angle iron, drill it so it mounts to two manifold bolt holes. Tape lower manifold off. Bolt angle iron. Lift with hoist. Replace subframe. Return hoist to HF bc "the welds were subpar."

That's what I did, minus replacing the subframe, when I busted a motor mount and the other one seized so I couldn't do the trick where you lift the motor with a jack underneath.

Rusty · 02-17-2022, 10:58 PM

Quote:

Originally Posted by BettyZ

Go to harbor freight and buy an engine hoist. Take off upper manifold. Get a piece of angle iron, drill it so it mounts to two manifold bolt holes. Tape lower manifold off. Bolt angle iron. Lift with hoist. Replace subframe. Return hoist to HF bc "the welds were subpar."

That's what I did, minus replacing the subframe, when I busted a motor mount and the other one seized so I couldn't do the trick where you lift the motor with a jack underneath.

Free rental.

02-12-2022, 05:04 PM	#17 (permalink)
BORNGEARHEAD Base Member Join Date: May 2020 Location: WI Posts: 58 Drives: 2020 370z Passion Rep Power: 3360	I replaced a front subframe in a G37 and I didnt touch the engine/trans other than unbolting the engine mounts. But I used a hoist and a jack to support the engine in the air. Gonna be a pretty crappy job on the ground but it could be done. I would find someone with a hoist and work something out with them. __________________ '20 370Z Sport - '15 Frontier - '04 350Z Roadster - '79 Datsun 620

02-17-2022, 10:27 PM	#18 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 38 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	Go to harbor freight and buy an engine hoist. Take off upper manifold. Get a piece of angle iron, drill it so it mounts to two manifold bolt holes. Tape lower manifold off. Bolt angle iron. Lift with hoist. Replace subframe. Return hoist to HF bc "the welds were subpar." That's what I did, minus replacing the subframe, when I busted a motor mount and the other one seized so I couldn't do the trick where you lift the motor with a jack underneath. Rusty likes this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New/used parts dealer in Europe - front subframe replacement	LotusEater	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	0	07-27-2021 04:47 PM
[FOR SALE] 370z subframe front crossmember engine cradle	Bros370z	Parts for sale (Private Classifieds)	2	07-22-2021 12:25 PM
Front Subframe bar	zpeck	Wanted	1	09-20-2015 08:35 AM
Front Spoiler Replacement	gsxr750	Exterior & Interior	5	10-10-2012 03:33 PM
GTSPEC Front 6 Point Subframe Brace Test Vehicle Needed	gtspec-ny	North East Region	11	09-01-2010 10:16 AM