Front Subframe Replacement

iweston33 · 02-05-2022, 07:06 PM

do I have to remove the engine and transmission to change the front subframe .

JARblue · 02-06-2022, 09:33 AM

The very first step according to the FSM is "remove engine and transmission assembly". I'd imagine you have to remove the transmission but it might be possible to support the engine from the top while you disconnect the subframe member - other smarter people will know the answer to this. Dropping the whole cradle and lifting the car off it is the easiest method of removing the engine tho; and then you can disconnect the subframe with it out of the vehicle.

Dreadnaught · 02-07-2022, 02:25 AM

It this were me using a lift or even on the ground I'd use chains or straps and put them under the motor mount arms and go over the strut bar to hold the engine up. Use rags under the chains so you don't scuff up the strut bar. I would also put a block of wood or a single post under the bell housing to hold the weight of the trans and engine. Then just start un bolting things like the lower control arms, outer tie rods etc etc. I would definitely have someone help you especially if you're going to be doing the job on your back. I would have to be under my Z right night to give you more information but I'm nice and toasty in my blankie having a Guinness. Let me know if I can be of more assistance.

Dreadnaught · 02-07-2022, 02:26 AM

And how the hell did that happen?

Spooler · 02-07-2022, 09:36 AM

Quote:

Originally Posted by Dreadnaught

And how the hell did that happen?

Dukes of Hazzard, What else.....

BettyZ · 02-07-2022, 09:55 AM

Quote:

Originally Posted by iweston33

do I have to remove the engine and transmission to change the front subframe .

How'd you manage to get the car upside down?

Ghostvette · 02-07-2022, 10:12 AM

Quote:

Originally Posted by iweston33

do I have to remove the engine and transmission to change the front subframe .

You've got additional problems over just the subframe. The oil pan is toast.

Spooler · 02-07-2022, 10:16 AM

Did ya do this?

Spooler · 02-07-2022, 10:48 AM

Maybe it was this.

JLarson · 02-07-2022, 03:59 PM

Quote:

Originally Posted by iweston33

do I have to remove the engine and transmission to change the front subframe .

I think I speak for all of us here when I say what the **** did you hit?

BettyZ · 02-07-2022, 04:12 PM

Quote:

Originally Posted by JLarson

I think I speak for all of us here when I say what the **** did you hit?

Or who...

Rusty · 02-07-2022, 08:55 PM

Quote:

Originally Posted by JLarson

I think I speak for all of us here when I say what the **** did you hit?

Never use a Z to 80-6 someone. See what happens.

iweston33 · 02-10-2022, 11:12 AM

Quote:

Originally Posted by Dreadnaught

And how the hell did that happen?

Philadelphia pot holes smh

iweston33 · 02-10-2022, 11:13 AM

Quote:

Originally Posted by Ghostvette

You've got additional problems over just the subframe. The oil pan is toast.

Yea trying to fix it all in one shot

iweston33 · 02-10-2022, 11:15 AM

Quote:

Originally Posted by JLarson

I think I speak for all of us here when I say what the **** did you hit?

Crazy pot hole

02-06-2022, 09:33 AM	#2 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	The very first step according to the FSM is "remove engine and transmission assembly". I'd imagine you have to remove the transmission but it might be possible to support the engine from the top while you disconnect the subframe member - other smarter people will know the answer to this. Dropping the whole cradle and lifting the car off it is the easiest method of removing the engine tho; and then you can disconnect the subframe with it out of the vehicle. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

02-07-2022, 02:25 AM	#3 (permalink)
Dreadnaught Track Member Join Date: Dec 2009 Location: Farmington, Utah Posts: 582 Drives: 14 SR 370z 6MT Rep Power: 10139	It this were me using a lift or even on the ground I'd use chains or straps and put them under the motor mount arms and go over the strut bar to hold the engine up. Use rags under the chains so you don't scuff up the strut bar. I would also put a block of wood or a single post under the bell housing to hold the weight of the trans and engine. Then just start un bolting things like the lower control arms, outer tie rods etc etc. I would definitely have someone help you especially if you're going to be doing the job on your back. I would have to be under my Z right night to give you more information but I'm nice and toasty in my blankie having a Guinness. Let me know if I can be of more assistance. Rusty, JLarson and BettyZ like this. __________________ Ford Diesel and Heavy Line Technician at your service.

02-07-2022, 02:26 AM	#4 (permalink)
Dreadnaught Track Member Join Date: Dec 2009 Location: Farmington, Utah Posts: 582 Drives: 14 SR 370z 6MT Rep Power: 10139	And how the hell did that happen? __________________ Ford Diesel and Heavy Line Technician at your service.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New/used parts dealer in Europe - front subframe replacement	LotusEater	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	0	07-27-2021 05:47 PM
[FOR SALE] 370z subframe front crossmember engine cradle	Bros370z	Parts for sale (Private Classifieds)	2	07-22-2021 01:25 PM
Front Subframe bar	zpeck	Wanted	1	09-20-2015 09:35 AM
Front Spoiler Replacement	gsxr750	Exterior & Interior	5	10-10-2012 04:33 PM
GTSPEC Front 6 Point Subframe Brace Test Vehicle Needed	gtspec-ny	North East Region	11	09-01-2010 11:16 AM

02-07-2022, 10:16 AM	#8 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	Did ya do this?

02-07-2022, 10:48 AM	#9 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	Maybe it was this.