Z1 Motorsports 370z Adjustable Suspension Kit? Any Good?

Hybrids · 07-20-2021, 04:30 PM

Looking into swapping out the stock stuff for adjustable arms and all while doing coilovers at the same time. I was wondering if anyone here has used this "kit" and if they enjoy it? + it fits my budget.

I am mainly concerned about reliability of the kit since it is my daily and I don't want to have to worry about stuff going wrong down the road... also concerned about the fitment and quality of these arms? I have seen some z1 products lacking in either quality or fitment and this is one I don't want any problems with when I go to tear my car fully apart.

Another question is should I stick with the SPC adjustment bolt kit or go all out on the z1 toe arms too? It would be out of my budget if i went with the toe arms but would it benefit me any in the long run?

BettyZ · 07-20-2021, 04:40 PM

Not reliable at all. Bite the bullet and go with SPL. They will outlast the car and probably you and your progeny.

DarkJak · 07-20-2021, 04:57 PM

Useful for people needing to maintain rubber bushings, but the front upper control arms require removal at each pickup point for adjustment.

If rules allow for sphericals, then SPL is much better.

Rusty · 07-20-2021, 07:40 PM

Get the SPL's. There is a reason why everyone here uses them. They work with no issues. You don't have to remove the arms to make adjustments like you have to do with other arms. The only reason not to get them is if you do autox and the rules say that you can't use them.

BettyZ · 07-20-2021, 08:58 PM

Just go whole hog and buy the SPL FUCAs, rear mid link, camber, and toe arms. Do it once and be done. You'll save $300 on alignments if you do it all at once, and you'll save infinity on alignments in the long term; because you'll never need one ever again.

OptionZero · 07-20-2021, 09:10 PM

Z1 is ****

SPL is bulletproof, better adjustment for you alignment tech, more range, better support

Hybrids · 07-21-2021, 08:04 AM

Quote:

Originally Posted by DarkJak

Useful for people needing to maintain rubber bushings, but the front upper control arms require removal at each pickup point for adjustment.

If rules allow for sphericals, then SPL is much better.

I only plan to keep this car on the street, I just want a better more responsive feel while driving. Would it be a waste of money to go with all SPL stuff if that is all I am doing with the car? If the z1 stuff is not reliable, what other brands would be a good option that would fill my needs? I am going to check out SPLs stuff and price everything out and see what I can do money-wise though since I really like their stuff and have seen it used a lot.

DaveZ03 · 07-21-2021, 08:35 AM

As has been stated above, go SPL and move on! My Z is a weekend fun car and may get out for a few miles, 1-3 times a month. That being said, I still bit the bullet and went SPL. ZERO regrets and will be buying more from them in the future given the quality, the ease of adjustment and the peace of mind that their parts provide.

BettyZ · 07-21-2021, 08:47 AM

Quote:

Originally Posted by Hybrids

I only plan to keep this car on the street, I just want a better more responsive feel while driving. Would it be a waste of money to go with all SPL stuff if that is all I am doing with the car? If the z1 stuff is not reliable, what other brands would be a good option that would fill my needs? I am going to check out SPLs stuff and price everything out and see what I can do money-wise though since I really like their stuff and have seen it used a lot.

Not at all a waste of money. Don't get me wrong, SPL is expensive as heck. But you're really buying peace of mind. SPL is about the only aftermarket stuff on my Z that I dont worry about when I'm driving

Brendan · 07-21-2021, 10:05 AM

I had the z1 kit for years. Primarily for autocross. It's a pain to adjust but I never had any rattles. Good budget option for a person who is just looking to lower the car and won't be making changes all the time. SPL is great but completely overkill for that scenario.

BettyZ · 07-21-2021, 10:26 AM

Quote:

Originally Posted by Brendan

I had the z1 kit for years. Primarily for autocross. It's a pain to adjust but I never had any rattles. Good budget option for a person who is just looking to lower the car and won't be making changes all the time. SPL is great but completely overkill for that scenario.

Yeah but your first Z got murdered by hail which was attracted to the Z1 kit like filings to a magnet. It's #science

Brendan · 07-21-2021, 11:05 AM

Quote:

Originally Posted by BettyZ

Yeah but your first Z got murdered by hail which was attracted to the Z1 kit like filings to a magnet. It's #science

Lol. SPL would have stopped that for sure.

abm89 · 07-21-2021, 11:40 AM

I have the Z1 front arms. the only downside is that you have to take the wheel off to adjust the alignment, which ends up costing a little more. Other than that, my alignment specs have not deviated significantly in between appointments, so they are at least reliable. I would recommend SPL if you're going to change alignment settings often though, as the cost comparison will eventually favor the SPLs down the line.

I have SPL rear camber arms with the toe bolts. They work as expected.

Brxce · 08-18-2021, 08:52 PM

I’ve been looking into coilovers with true style rears. Is there anything to replace the rear mid link with that doesn’t have the huge bucket for the spring?

JARblue · 08-18-2021, 08:57 PM

Quote:

Originally Posted by Brxce

I’ve been looking into coilovers with true style rears. Is there anything to replace the rear mid link with that doesn’t have the huge bucket for the spring?

SPL Rear Toe Arms

07-20-2021, 04:30 PM	#1 (permalink)
Hybrids Base Member Join Date: Mar 2021 Location: USA Posts: 22 Drives: 2009 370z 6MT Rep Power: 4	Z1 Motorsports 370z Adjustable Suspension Kit? Any Good? Looking into swapping out the stock stuff for adjustable arms and all while doing coilovers at the same time. I was wondering if anyone here has used this "kit" and if they enjoy it? + it fits my budget. I am mainly concerned about reliability of the kit since it is my daily and I don't want to have to worry about stuff going wrong down the road... also concerned about the fitment and quality of these arms? I have seen some z1 products lacking in either quality or fitment and this is one I don't want any problems with when I go to tear my car fully apart. Another question is should I stick with the SPC adjustment bolt kit or go all out on the z1 toe arms too? It would be out of my budget if i went with the toe arms but would it benefit me any in the long run?

07-20-2021, 04:40 PM	#2 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 37 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	Not reliable at all. Bite the bullet and go with SPL. They will outlast the car and probably you and your progeny. ltullos, JARblue, Rusty and 1 others like this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

07-20-2021, 04:57 PM	#3 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,397 Drives: 2009 370Z Rep Power: 16804	Useful for people needing to maintain rubber bushings, but the front upper control arms require removal at each pickup point for adjustment. If rules allow for sphericals, then SPL is much better. Rusty likes this. __________________ @stupidtoycars \| My track vids 09 7AT\|MCS 2WNR\|Topgunz Rotrex\|Ecutek (Eugene)\|Maxxis RC1\|Titan-7 TS-5\|OSG LSD\|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler\|Fismo\|G-LOC R12/R10\|Zeta III L\|NLR Wing and Splitter\|CJM Pan and Fuel Hat\|Radium Surge Tank\|AP Racing CP9668

07-20-2021, 07:40 PM	#4 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Get the SPL's. There is a reason why everyone here uses them. They work with no issues. You don't have to remove the arms to make adjustments like you have to do with other arms. The only reason not to get them is if you do autox and the rules say that you can't use them. JARblue, Spooler, ZontheRocks and 2 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

07-20-2021, 08:58 PM	#5 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 37 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	Just go whole hog and buy the SPL FUCAs, rear mid link, camber, and toe arms. Do it once and be done. You'll save $300 on alignments if you do it all at once, and you'll save infinity on alignments in the long term; because you'll never need one ever again. Rusty and ZontheRocks like this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

07-20-2021, 09:10 PM	#6 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,225 Drives: 15 370Z Nismo 6MT Rep Power: 214100	Z1 is **** SPL is bulletproof, better adjustment for you alignment tech, more range, better support JARblue, Rusty, sx moneypit and 2 others like this. __________________ OptionZero Build Thread

07-21-2021, 08:35 AM	#8 (permalink)
DaveZ03 Base Member Join Date: Feb 2019 Location: Kentucky Posts: 217 Drives: '11 FairladyZ Rep Power: 51859	As has been stated above, go SPL and move on! My Z is a weekend fun car and may get out for a few miles, 1-3 times a month. That being said, I still bit the bullet and went SPL. ZERO regrets and will be buying more from them in the future given the quality, the ease of adjustment and the peace of mind that their parts provide. Rusty, ZontheRocks and BettyZ like this.

07-21-2021, 10:05 AM	#10 (permalink)
Brendan Track Member Join Date: Apr 2013 Location: Colorado Posts: 640 Drives: Poor man's Porsche Rep Power: 542	I had the z1 kit for years. Primarily for autocross. It's a pain to adjust but I never had any rattles. Good budget option for a person who is just looking to lower the car and won't be making changes all the time. SPL is great but completely overkill for that scenario. BettyZ likes this.

07-21-2021, 11:40 AM	#13 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,386 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	I have the Z1 front arms. the only downside is that you have to take the wheel off to adjust the alignment, which ends up costing a little more. Other than that, my alignment specs have not deviated significantly in between appointments, so they are at least reliable. I would recommend SPL if you're going to change alignment settings often though, as the cost comparison will eventually favor the SPLs down the line. I have SPL rear camber arms with the toe bolts. They work as expected. Rusty and BettyZ like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

08-18-2021, 08:52 PM	#14 (permalink)
Brxce Base Member Join Date: Feb 2021 Location: Connecticut, USA Posts: 22 Drives: 2019 370z Black 6M Rep Power: 4	I’ve been looking into coilovers with true style rears. Is there anything to replace the rear mid link with that doesn’t have the huge bucket for the spring?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ams inc. Adjustable arms & suspension sale!	Wolf@AMS	Suspension/Brakes	15	10-27-2014 10:17 PM
Z1 Motorsports Adjustable Transmission Mount Coming SOON!	Dustin@Z1	Z1 Motorsports	33	06-03-2013 02:20 AM
AMS Adjustable Short Throw Shifter available @ Z1 Motorsports	Dustin@Z1	Drivetrain/Engine	62	05-10-2011 04:05 PM
Stock suspension, what's adjustable	spearfish25	Brakes & Suspension	7	04-13-2011 11:51 PM
AMS Adjustable Short Throw Shifter now available @ Z1 Motorsports	Dustin@Z1	Z1 Motorsports	0	08-31-2009 06:12 PM